From: Joel Stanley <joel@jms.id.au>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Karol Gugala <kgugala@antmicro.com>,
Mateusz Holenko <mholenko@antmicro.com>,
devicetree@vger.kernel.org,
Florent Kermarrec <florent@enjoy-digital.fr>,
"Gabriel L . Somlo" <gsomlo@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] net: Add LiteETH network driver
Date: Wed, 25 Aug 2021 22:16:53 +0930 [thread overview]
Message-ID: <20210825124655.3104348-1-joel@jms.id.au> (raw)
This adds a driver for the LiteX network device, LiteEth.
v3 Updates the bindings to describe the slots in a way that makes more
sense for the hardware, instead of trying to fit some existing
properties. The driver is updated to use these bindings, and fix some
issues pointed out by Gabriel.
v2 Addresses feedback from Jakub, with detailed changes in each patch.
It also moves to the litex register accessors so the system works on big
endian litex platforms. I tested with mor1k on an Arty A7-100T.
I have removed the mdio aspects of the driver as they are not needed for
basic operation. I will continue to work on adding support in the
future, but I don't think it needs to block the mac driver going in.
The binding describes the mdio registers, and has been fixed to not show
any warnings against dtschema master.
LiteEth is a simple driver for the FPGA based Ethernet device used in various
RISC-V, PowerPC's microwatt, OpenRISC's mor1k and other FPGA based
systems on chip.
Joel Stanley (2):
dt-bindings: net: Add bindings for LiteETH
net: Add driver for LiteX's LiteETH network interface
.../bindings/net/litex,liteeth.yaml | 100 ++++++
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/litex/Kconfig | 27 ++
drivers/net/ethernet/litex/Makefile | 5 +
drivers/net/ethernet/litex/litex_liteeth.c | 317 ++++++++++++++++++
6 files changed, 451 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/litex,liteeth.yaml
create mode 100644 drivers/net/ethernet/litex/Kconfig
create mode 100644 drivers/net/ethernet/litex/Makefile
create mode 100644 drivers/net/ethernet/litex/litex_liteeth.c
--
2.33.0
next reply other threads:[~2021-08-25 12:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 12:46 Joel Stanley [this message]
2021-08-25 12:46 ` [PATCH v3 1/2] dt-bindings: net: Add bindings for LiteETH Joel Stanley
2021-08-25 16:38 ` Rob Herring
2021-08-25 12:46 ` [PATCH v3 2/2] net: Add driver for LiteX's LiteETH network interface Joel Stanley
2021-08-25 22:04 ` Gabriel L. Somlo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210825124655.3104348-1-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=florent@enjoy-digital.fr \
--cc=gsomlo@gmail.com \
--cc=kgugala@antmicro.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mholenko@antmicro.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®