mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Larry Finger <Larry.Finger@lwfinger.net>,
	Marcel Holtmann <marcel@holtmann.org>
Subject: [PATCH 5.14 06/23] Bluetooth: Add additional Bluetooth part for Realtek 8852AE
Date: Fri, 10 Sep 2021 14:29:56 +0200	[thread overview]
Message-ID: <20210910122916.224033109@linuxfoundation.org> (raw)
In-Reply-To: <20210910122916.022815161@linuxfoundation.org>

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 6eefec4a0b668de9bbb33bd3e7acfbcc794162b0 upstream.

This Realtek device has both wifi and BT components. The latter reports
a USB ID of 04ca:4006, which is not in the table.

The portion of /sys/kernel/debug/usb/devices pertaining to this device is

T:  Bus=02 Lev=01 Prnt=01 Port=12 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4006 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -452,6 +452,10 @@ static const struct usb_device_id blackl
 	/* Additional Realtek 8822CE Bluetooth devices */
 	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	/* Bluetooth component of Realtek 8852AE device */
+	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |



  parent reply	other threads:[~2021-09-10 12:31 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-10 12:29 [PATCH 5.14 00/23] 5.14.3-rc1 review Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 01/23] firmware: dmi: Move product_sku info to the end of the modalias Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 02/23] can: c_can: fix null-ptr-deref on ioctl() Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 03/23] igmp: Add ip_mc_list lock in ip_check_mc_rcu Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 04/23] Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM" Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 05/23] ALSA: usb-audio: Add registration quirk for JBL Quantum 800 Greg Kroah-Hartman
2021-09-10 12:29 ` Greg Kroah-Hartman [this message]
2021-09-10 12:29 ` [PATCH 5.14 07/23] Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 08/23] usb: host: xhci-rcar: Dont reload firmware after the completion Greg Kroah-Hartman
2021-09-10 12:29 ` [PATCH 5.14 09/23] usb: xhci-mtk: fix issue of out-of-bounds array access Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 10/23] usb: cdnsp: fix the wrong mult value for HS isoc or intr Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 11/23] usb: gadget: tegra-xudc: " Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 12/23] usb: mtu3: restore HS function when set SS/SSP Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 13/23] usb: mtu3: use @mult for HS isoc or intr Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 14/23] usb: mtu3: fix the wrong HS mult value Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 15/23] xhci: fix even more unsafe memory usage in xhci tracing Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 16/23] xhci: fix " Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 17/23] xhci: Fix failure to give back some cached cancelled URBs Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 18/23] staging: mt7621-pci: fix hang when nothing is connected to pcie ports Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 19/23] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 20/23] PCI: Call Max Payload Size-related fixup quirks early Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 21/23] cxl/pci: Fix debug message in cxl_probe_regs() Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 22/23] cxl/pci: Fix lockdown level Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.14 23/23] cxl/acpi: Do not add DSDT disabled ACPI0016 host bridge ports Greg Kroah-Hartman
2021-09-10 20:19 ` [PATCH 5.14 00/23] 5.14.3-rc1 review Florian Fainelli
2021-09-10 20:43 ` Fox Chen
2021-09-10 23:16 ` Shuah Khan
2021-09-11 16:10 ` Justin Forbes
2021-09-11 19:36 ` Guenter Roeck
2021-09-12  0:47 ` Daniel Díaz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210910122916.224033109@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®