From: Ronak Jain <ronak.jain@xilinx.com>
To: <michal.simek@xilinx.com>, <linux-kernel@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <rajan.vaja@xilinx.com>,
<corbet@lwn.net>, <linux-arm-kernel@lists.infradead.org>,
<arnd@arndb.de>, <lakshmi.sai.krishna.potthuri@xilinx.com>,
Ronak Jain <ronak.jain@xilinx.com>
Subject: [PATCH v2 2/3] firmware: zynqmp: Add sysfs entry for runtime features
Date: Mon, 13 Sep 2021 01:39:54 -0700 [thread overview]
Message-ID: <20210913083955.27146-3-ronak.jain@xilinx.com> (raw)
In-Reply-To: <20210913083955.27146-1-ronak.jain@xilinx.com>
Create sysfs entry for runtime feature configuration. The support
is added for an over temperature and external watchdog feature.
The below listed files are used for runtime features configuration:
/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
In order to configure an over temperature or external watchdog
features, first the user need to select the valid config id and then
the user can configure the value for selected feature config id.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
---
Changes in v2:
- Update commit message
---
.../ABI/stable/sysfs-driver-firmware-zynqmp | 84 +++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index f5724bb5b462..2fde354715a5 100644
--- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -113,3 +113,87 @@ Description:
# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_*
+Date: Aug 2021
+KernelVersion: 5.14
+Contact: "Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+ This sysfs interface allows to configure features at runtime.
+ The user can enable or disable features running at firmware.
+ Also, the user can configure the parameters of the features
+ at runtime. The supported features are over temperature and
+ external watchdog. Here, the external watchdog is completely
+ different than the /dev/watchdog as the external watchdog is
+ running on the firmware and it is used to monitor the health
+ of firmware not APU(Linux). Also, the external watchdog is
+ interfaced outside of the zynqmp soc.
+
+ By default the features are disabled in the firmware. The user
+ can enable features by querying appropriate config id of the
+ features.
+
+ The default limit for the over temperature is 90 Degree Celsius.
+ The default timer interval for the external watchdog is 570ms.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Enable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure over temperature limit to 50 Degree Celsius
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature limit is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 50.
+
+ Enable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure external watchdog timer interval to 500ms
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog timer interval is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 500.
+
+Users: Xilinx
--
2.32.0.93.g670b81a
next prev parent reply other threads:[~2021-09-13 8:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-13 8:39 [PATCH v2 0/3] Add support " Ronak Jain
2021-09-13 8:39 ` [PATCH v2 1/3] firmware: xilinx: " Ronak Jain
2021-09-13 8:39 ` Ronak Jain [this message]
2021-09-16 23:37 ` [PATCH v2 2/3] firmware: zynqmp: Add sysfs entry " Punit Agrawal
2021-09-13 8:39 ` [PATCH v2 3/3] firmware: xilinx: Add sysfs support for feature config Ronak Jain
2021-09-14 9:21 ` Greg KH
2021-09-15 6:16 ` Ronak Jain
2021-09-15 6:29 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210913083955.27146-3-ronak.jain@xilinx.com \
--to=ronak.jain@xilinx.com \
--cc=arnd@arndb.de \
--cc=corbet@lwn.net \
--cc=gregkh@linuxfoundation.org \
--cc=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®