Re: [PATCH v2] usb: ohci: add check for start frame in host controller functional states

[Alan Stern <stern@rowland.harvard.edu>]

On Wed, Sep 29, 2021 at 06:09:27PM +0800, Yinbo Zhu wrote:
> The pm states of ohci controller include UsbOperational, UsbReset, UsbSuspend

Those aren't really PM states.  The specification calls them "USB 
states".

> , and UsbResume. Among them, only the UsbOperational state supports launching
--^

This comma should come directly after the word "launching", with no 
space in between.

> the start frame for host controller according the ohci protocol spec, but in
> S3/S4 press test procedure, it may happen that the start frame was launched

What is the S3/S4 press test?  I don't recall hearing of it before.

> in other pm states and cause ohci works abnormally then kernel will allways
> report rcu CallTrace. This patch was to add check for start frame in host
> controller functional states for fixing above issue.

The patch doesn't check for start of frames, that is, it doesn't check 
the INTR_SF bit in the intrstatus register.  Instead it checks whether 
controller is in the UsbOperational state.  And the patch also sets 
INTR_SF in the intrdisable register -- you do not mention this in the 
description.

> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> ---
> Change in v2:
> 		Revise the punctuation.	
> 
>  drivers/usb/host/ohci-hcd.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index 1f5e693..f0aeae5 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -881,6 +881,13 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
>  	struct ohci_regs __iomem *regs = ohci->regs;
>  	int			ints;
>  
> +	ints = ohci_readl(ohci, &regs->control);
> +
> +	if ((ints & OHCI_CTRL_HCFS) != OHCI_USB_OPER) {
> +		ohci_writel(ohci, OHCI_INTR_SF, &regs->intrdisable);
> +		(void)ohci_readl(ohci, &regs->intrdisable);
> +	}

The driver is already supposed to prevent this problem by writing the 
OHCI_INTR_SF flag to the intrdisable register when start-of-frame 
interrupts aren't needed.  Maybe what you should do is change this code 
lower down in ohci_irq():

	if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
			&& ohci->rh_state == OHCI_RH_RUNNING)
		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);

by getting rid of the test for OHCI_RH_RUNNING.

Alan Stern

> +
>  	/* Read interrupt status (and flush pending writes).  We ignore the
>  	 * optimization of checking the LSB of hcca->done_head; it doesn't
>  	 * work on all systems (edge triggering for OHCI can be a factor).
> -- 
> 1.8.3.1
>