From: Frieder Schrempf <frieder@fris.de>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH 2/8] arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
Date: Thu, 30 Sep 2021 17:56:25 +0200 [thread overview]
Message-ID: <20210930155633.2745201-3-frieder@fris.de> (raw)
In-Reply-To: <20210930155633.2745201-1-frieder@fris.de>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
VDD_SOC should be 800 mV in suspend and 850 mV in run mode. VDD_DRAM
should be 950 mV for DDR clock frequencies of 1.5 GHz.
This information is taken from the datasheet and the uboot-imx code.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 03b3516abd64..b12fb7ce6686 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -92,10 +92,12 @@ regulators {
reg_vdd_soc: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <850000>;
+ nxp,dvs-standby-voltage = <800000>;
};
reg_vdd_arm: BUCK2 {
@@ -111,7 +113,7 @@ reg_vdd_arm: BUCK2 {
reg_vdd_dram: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
};
--
2.33.0
next prev parent reply other threads:[~2021-09-30 15:56 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-30 15:56 [PATCH 0/8] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards Frieder Schrempf
2021-09-30 15:56 ` [PATCH 1/8] arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card Frieder Schrempf
2021-10-05 6:45 ` Shawn Guo
2021-10-15 10:44 ` Frieder Schrempf
2021-09-30 15:56 ` Frieder Schrempf [this message]
2021-09-30 16:02 ` [PATCH 2/8] arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct Frieder Schrempf
2021-10-05 6:49 ` Shawn Guo
2021-10-05 6:53 ` Shawn Guo
2021-10-05 13:10 ` Frieder Schrempf
2021-10-15 3:51 ` Shawn Guo
2021-09-30 15:56 ` [PATCH 3/8] arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV Frieder Schrempf
2021-10-05 6:56 ` Shawn Guo
2021-10-05 13:14 ` Frieder Schrempf
2021-10-15 4:04 ` Shawn Guo
2021-09-30 15:56 ` [PATCH 4/8] arm64: dts: imx8mm-kontron: Fix reg_rst_eth2 and reg_vdd_5v regulators Frieder Schrempf
2021-10-05 7:09 ` Shawn Guo
2021-10-05 17:06 ` Frieder Schrempf
2021-10-15 4:09 ` Shawn Guo
2021-10-15 11:32 ` Frieder Schrempf
2021-09-30 15:56 ` [PATCH 5/8] arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency Frieder Schrempf
2021-10-05 7:12 ` Shawn Guo
2021-10-05 17:17 ` Frieder Schrempf
2021-10-15 4:12 ` Shawn Guo
2021-09-30 15:56 ` [PATCH 6/8] arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY Frieder Schrempf
2021-10-05 7:20 ` Shawn Guo
2021-09-30 15:56 ` [PATCH 7/8] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY Frieder Schrempf
2021-09-30 15:56 ` [PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on Frieder Schrempf
2021-09-30 18:52 ` Heiko Thiery
2021-10-05 7:27 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210930155633.2745201-3-frieder@fris.de \
--to=frieder@fris.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®