mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hayes Wang <hayeswang@realtek.com>
To: <jason-ch.chen@mediatek.com>, <kuba@kernel.org>, <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <nic_swsd@realtek.com>,
	<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	Hayes Wang <hayeswang@realtek.com>
Subject: [PATCH net] r8152: avoid to resubmit rx immediately
Date: Mon, 4 Oct 2021 14:28:58 +0800	[thread overview]
Message-ID: <20211004062858.1679-381-nic_swsd@realtek.com> (raw)
In-Reply-To: <20210929051812.3107-1-jason-ch.chen@mediatek.com>

For the situation that the disconnect event comes very late when the
device is unplugged, the driver would resubmit the RX bulk transfer
after getting the callback with -EPROTO immediately and continually.
Finally, soft lockup occurs.

This patch avoids to resubmit RX immediately. It uses a workqueue to
schedule the RX NAPI. And the NAPI would resubmit the RX. It let the
disconnect event have opportunity to stop the submission before soft
lockup.

Reported-by: Jason-ch Chen <jason-ch.chen@mediatek.com>
Tested-by: Jason-ch Chen <jason-ch.chen@mediatek.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 60ba9b734055..f329e39100a7 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -767,6 +767,7 @@ enum rtl8152_flags {
 	PHY_RESET,
 	SCHEDULE_TASKLET,
 	GREEN_ETHERNET,
+	RX_EPROTO,
 };
 
 #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2	0x3082
@@ -1770,6 +1771,14 @@ static void read_bulk_callback(struct urb *urb)
 		rtl_set_unplug(tp);
 		netif_device_detach(tp->netdev);
 		return;
+	case -EPROTO:
+		urb->actual_length = 0;
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		set_bit(RX_EPROTO, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 1);
+		return;
 	case -ENOENT:
 		return;	/* the urb is in unlink state */
 	case -ETIME:
@@ -2425,6 +2434,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
 	if (list_empty(&tp->rx_done))
 		goto out1;
 
+	clear_bit(RX_EPROTO, &tp->flags);
 	INIT_LIST_HEAD(&rx_queue);
 	spin_lock_irqsave(&tp->rx_lock, flags);
 	list_splice_init(&tp->rx_done, &rx_queue);
@@ -2441,7 +2451,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
 
 		agg = list_entry(cursor, struct rx_agg, list);
 		urb = agg->urb;
-		if (urb->actual_length < ETH_ZLEN)
+		if (urb->status != 0 || urb->actual_length < ETH_ZLEN)
 			goto submit;
 
 		agg_free = rtl_get_free_rx(tp, GFP_ATOMIC);
@@ -6643,6 +6653,10 @@ static void rtl_work_func_t(struct work_struct *work)
 	    netif_carrier_ok(tp->netdev))
 		tasklet_schedule(&tp->tx_tl);
 
+	if (test_and_clear_bit(RX_EPROTO, &tp->flags) &&
+	    !list_empty(&tp->rx_done))
+		napi_schedule(&tp->napi);
+
 	mutex_unlock(&tp->control);
 
 out1:
-- 
2.31.1


  parent reply	other threads:[~2021-10-04  6:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-29  5:18 [PATCH] r8152: stop submitting rx for -EPROTO Jason-ch Chen
2021-09-29  8:14 ` Hayes Wang
2021-09-29  9:52   ` Jason-ch Chen
2021-09-30  2:41     ` Hayes Wang
2021-10-01  1:36       ` Jason-ch Chen
2021-09-30  9:30     ` Oliver Neukum
2021-09-30 15:18       ` Alan Stern
2021-10-01  2:40         ` Hayes Wang
2021-10-01  3:26           ` Hayes Wang
2021-10-01 15:22             ` Alan Stern
2021-10-04  2:15               ` Hayes Wang
2021-10-04 11:44               ` Oliver Neukum
2021-10-04 14:33                 ` Alan Stern
2021-09-30 16:13       ` Hayes Wang
2021-10-04  6:28 ` Hayes Wang [this message]
2021-10-05 11:50   ` [PATCH net] r8152: avoid to resubmit rx immediately patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211004062858.1679-381-nic_swsd@realtek.com \
    --to=hayeswang@realtek.com \
    --cc=davem@davemloft.net \
    --cc=jason-ch.chen@mediatek.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®