From: Yazen Ghannam <yazen.ghannam@amd.com>
To: <linux-edac@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <bp@alien8.de>,
<mchehab@kernel.org>, <tony.luck@intel.com>,
<james.morse@arm.com>, <rric@kernel.org>,
<Smita.KoralahalliChannabasappa@amd.com>,
Yazen Ghannam <yazen.ghannam@amd.com>
Subject: [PATCH] EDAC/amd64: Handle three rank interleaving mode
Date: Tue, 5 Oct 2021 15:44:19 +0000 [thread overview]
Message-ID: <20211005154419.2060504-1-yazen.ghannam@amd.com> (raw)
AMD Rome systems and later support interleaving between three identical
ranks within a channel.
Check for this mode by counting the number of enabled chip selects and
comparing their masks. If there are exactly three enabled chip selects
and their masks are identical, then three rank interleaving is enabled.
The size of a rank is determined from its mask value. However, three
rank interleaving doesn't follow the method of swapping an interleave
bit with the most significant bit. Rather, the interleave bit is flipped
and the most significant bit remains the same. There is only a single
interleave bit in this case.
Account for this when determining the chip select size by keeping the
most significant bit at its original value and ignoring any zero bits.
This will return a full bitmask in [MSB:1].
Fixes: e53a3b267fb0 ("EDAC/amd64: Find Chip Select memory size using Address Mask")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
drivers/edac/amd64_edac.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 99b06a3e8fb1..4fce75013674 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1065,12 +1065,14 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
#define CS_ODD_PRIMARY BIT(1)
#define CS_EVEN_SECONDARY BIT(2)
#define CS_ODD_SECONDARY BIT(3)
+#define CS_3R_INTERLEAVE BIT(4)
#define CS_EVEN (CS_EVEN_PRIMARY | CS_EVEN_SECONDARY)
#define CS_ODD (CS_ODD_PRIMARY | CS_ODD_SECONDARY)
static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
{
+ u8 base, count = 0;
int cs_mode = 0;
if (csrow_enabled(2 * dimm, ctrl, pvt))
@@ -1083,6 +1085,20 @@ static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt)
if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt))
cs_mode |= CS_ODD_SECONDARY;
+ /*
+ * 3 Rank inteleaving support.
+ * There should be only three bases enabled and their two masks should
+ * be equal.
+ */
+ for_each_chip_select(base, ctrl, pvt)
+ count += csrow_enabled(base, ctrl, pvt);
+
+ if (count == 3 &&
+ pvt->csels[ctrl].csmasks[0] == pvt->csels[ctrl].csmasks[1]) {
+ edac_dbg(1, "3R interleaving in use.\n");
+ cs_mode |= CS_3R_INTERLEAVE;
+ }
+
return cs_mode;
}
@@ -1891,10 +1907,14 @@ static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc,
*
* The MSB is the number of bits in the full mask because BIT[0] is
* always 0.
+ *
+ * In the special 3 Rank interleaving case, a single bit is flipped
+ * without swapping with the most significant bit. This can be handled
+ * by keeping the MSB where it is and ignoring the single zero bit.
*/
msb = fls(addr_mask_orig) - 1;
weight = hweight_long(addr_mask_orig);
- num_zero_bits = msb - weight;
+ num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE);
/* Take the number of zero bits off from the top of the mask. */
addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1);
--
2.25.1
next reply other threads:[~2021-10-05 15:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 15:44 Yazen Ghannam [this message]
2021-10-07 10:57 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211005154419.2060504-1-yazen.ghannam@amd.com \
--to=yazen.ghannam@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=bp@alien8.de \
--cc=james.morse@arm.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rric@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®