[PATCH 9/9] staging: r8188eu: support interface is always usb

[Martin Kaiser <martin@kaiser.cx>]

We set ODM_CMNINFO_INTERFACE to ODM_ITRF_USB as this driver supports
only usb. Therefore, dm_odm->SupportInterface is always ODM_ITRF_USB.

Simplify some if conditions accordingly. Remove/replace two empty
functions.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 drivers/staging/r8188eu/hal/odm_HWConfig.c | 58 +++++++---------------
 1 file changed, 19 insertions(+), 39 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/odm_HWConfig.c b/drivers/staging/r8188eu/hal/odm_HWConfig.c
index 86c2e03dcdce..2383f965f689 100644
--- a/drivers/staging/r8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/r8188eu/hal/odm_HWConfig.c
@@ -17,54 +17,34 @@ static u8 odm_QueryRxPwrPercentage(s8 AntPower)
 		return 100 + AntPower;
 }
 
-/*  2012/01/12 MH MOve some signal strength smooth method to MP HAL layer. */
-/*  IF other SW team do not support the feature, remove this section.?? */
-static s32 odm_sig_patch_lenove(struct odm_dm_struct *dm_odm, s32 CurrSig)
-{
-	return 0;
-}
-
-static s32 odm_sig_patch_netcore(struct odm_dm_struct *dm_odm, s32 CurrSig)
-{
-	return 0;
-}
-
 static s32 odm_SignalScaleMapping_92CSeries(struct odm_dm_struct *dm_odm, s32 CurrSig)
 {
 	s32 RetSig = 0;
 
-	if ((dm_odm->SupportInterface  == ODM_ITRF_USB) ||
-	    (dm_odm->SupportInterface  == ODM_ITRF_SDIO)) {
-		if (CurrSig >= 51 && CurrSig <= 100)
-			RetSig = 100;
-		else if (CurrSig >= 41 && CurrSig <= 50)
-			RetSig = 80 + ((CurrSig - 40) * 2);
-		else if (CurrSig >= 31 && CurrSig <= 40)
-			RetSig = 66 + (CurrSig - 30);
-		else if (CurrSig >= 21 && CurrSig <= 30)
-			RetSig = 54 + (CurrSig - 20);
-		else if (CurrSig >= 10 && CurrSig <= 20)
-			RetSig = 42 + (((CurrSig - 10) * 2) / 3);
-		else if (CurrSig >= 5 && CurrSig <= 9)
-			RetSig = 22 + (((CurrSig - 5) * 3) / 2);
-		else if (CurrSig >= 1 && CurrSig <= 4)
-			RetSig = 6 + (((CurrSig - 1) * 3) / 2);
-		else
-			RetSig = CurrSig;
-	}
+	if (CurrSig >= 51 && CurrSig <= 100)
+		RetSig = 100;
+	else if (CurrSig >= 41 && CurrSig <= 50)
+		RetSig = 80 + ((CurrSig - 40) * 2);
+	else if (CurrSig >= 31 && CurrSig <= 40)
+		RetSig = 66 + (CurrSig - 30);
+	else if (CurrSig >= 21 && CurrSig <= 30)
+		RetSig = 54 + (CurrSig - 20);
+	else if (CurrSig >= 10 && CurrSig <= 20)
+		RetSig = 42 + (((CurrSig - 10) * 2) / 3);
+	else if (CurrSig >= 5 && CurrSig <= 9)
+		RetSig = 22 + (((CurrSig - 5) * 3) / 2);
+	else if (CurrSig >= 1 && CurrSig <= 4)
+		RetSig = 6 + (((CurrSig - 1) * 3) / 2);
+	else
+		RetSig = CurrSig;
+
 	return RetSig;
 }
 
 static s32 odm_SignalScaleMapping(struct odm_dm_struct *dm_odm, s32 CurrSig)
 {
-	if ((dm_odm->SupportPlatform == ODM_MP) &&
-	    (dm_odm->SupportInterface != ODM_ITRF_PCIE) && /* USB & SDIO */
-	    (dm_odm->PatchID == 10))
-		return odm_sig_patch_netcore(dm_odm, CurrSig);
-	else if ((dm_odm->SupportPlatform == ODM_MP) &&
-		 (dm_odm->SupportInterface == ODM_ITRF_PCIE) &&
-		 (dm_odm->PatchID == 19))
-		return odm_sig_patch_lenove(dm_odm, CurrSig);
+	if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 10))
+		return 0;
 	else
 		return odm_SignalScaleMapping_92CSeries(dm_odm, CurrSig);
 }
-- 
2.20.1