From: Maarten Zanders <maarten.zanders@mind.be>
To: unlisted-recipients:; (no To-header on input)
Cc: maarten.zanders@mind.be, Maarten Zanders <m.zanders@televic.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <rmk+kernel@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's
Date: Mon, 11 Oct 2021 16:27:20 +0200 [thread overview]
Message-ID: <20211011142720.42642-1-maarten.zanders@mind.be> (raw)
mv88e6xxx_port_ppu_updates() interpretes data in the PORT_STS
register incorrectly for internal ports (ie no PPU). In these
cases, the PHY_DETECT bit indicates link status. This results
in forcing the MAC state whenever the PHY link goes down which
is not intended. As a side effect, LED's configured to show
link status stay lit even though the physical link is down.
Add a check in mac_link_down and mac_link_up to see if it
concerns an external port and only then, look at PPU status.
Fixes: 5d5b231da7ac (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down)
Reported-by: Maarten Zanders <m.zanders@televic.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
---
drivers/net/dsa/mv88e6xxx/chip.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index ee3f32d1cf46..f5ce05d78e11 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -726,9 +726,13 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
ops = chip->info->ops;
mv88e6xxx_reg_lock(chip);
- if ((!mv88e6xxx_port_ppu_updates(chip, port) ||
- mode == MLO_AN_FIXED) && ops->port_sync_link)
+ /* Internal PHYs propagate their configuration directly to the MAC.
+ * External PHYs depend on whether the PPU is enabled for this port.
+ */
+ if (((!mv88e6xxx_phy_is_internal(ds, port) &&
+ !mv88e6xxx_port_ppu_updates(chip, port)) ||
+ mode == MLO_AN_FIXED) && ops->port_sync_link)
err = ops->port_sync_link(chip, port, mode, false);
mv88e6xxx_reg_unlock(chip);
@@ -750,7 +754,12 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port,
ops = chip->info->ops;
mv88e6xxx_reg_lock(chip);
- if (!mv88e6xxx_port_ppu_updates(chip, port) || mode == MLO_AN_FIXED) {
+ /* Internal PHYs propagate their configuration directly to the MAC.
+ * External PHYs depend on whether the PPU is enabled for this port.
+ */
+ if ((!mv88e6xxx_phy_is_internal(ds, port) &&
+ !mv88e6xxx_port_ppu_updates(chip, port)) ||
+ mode == MLO_AN_FIXED) {
/* FIXME: for an automedia port, should we force the link
* down here - what if the link comes up due to "other" media
* while we're bringing the port up, how is the exclusivity
--
2.25.1
next reply other threads:[~2021-10-11 14:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-11 14:27 Maarten Zanders [this message]
2021-10-17 21:07 ` Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211011142720.42642-1-maarten.zanders@mind.be \
--to=maarten.zanders@mind.be \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.zanders@televic.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®