From: Apurva Nandan <a-nandan@ti.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Mark Brown <broonie@kernel.org>, Apurva Nandan <a-nandan@ti.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Christophe Kerello <christophe.kerello@foss.st.com>,
Boris Brezillon <boris.brezillon@collabora.com>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<linux-spi@vger.kernel.org>
Cc: <p.yadav@ti.com>
Subject: [PATCH v2 14/14] mtd: spinand: winbond: Add support for Winbond W35N01JW SPI NAND flash
Date: Tue, 12 Oct 2021 02:16:19 +0530 [thread overview]
Message-ID: <20211011204619.81893-15-a-nandan@ti.com> (raw)
In-Reply-To: <20211011204619.81893-1-a-nandan@ti.com>
Winbond W35N01JW is a SPI NAND flash supporting Octal DTR SPI protocol.
Add op_variants for W35N01JW, which include the Octal DTR read/write
page ops as well. Add W35N01JW's OOB layout functions for the
mtd_ooblayout_ops. Finally, add an entry for W35N01JW in spinand_info
table.
Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
drivers/mtd/nand/spi/winbond.c | 53 ++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 1857836f19d0..8f687b6a6697 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -47,6 +47,19 @@ static SPINAND_OP_VARIANTS(update_cache_variants_w25xxgv,
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_w35n01jw,
+ SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(0, 24, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants_w35n01jw,
+ SPINAND_PROG_LOAD_OCTALIO_DTR(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants_w35n01jw,
+ SPINAND_PROG_LOAD_OCTALIO_DTR(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
static int w25m02gv_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
@@ -71,11 +84,40 @@ static int w25m02gv_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static int w35n01jw_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 12;
+ region->length = 4;
+
+ return 0;
+}
+
+static int w35n01jw_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 2;
+ region->length = 10;
+
+ return 0;
+}
+
static const struct mtd_ooblayout_ops w25m02gv_ooblayout = {
.ecc = w25m02gv_ooblayout_ecc,
.free = w25m02gv_ooblayout_free,
};
+static const struct mtd_ooblayout_ops w35n01jw_ooblayout = {
+ .ecc = w35n01jw_ooblayout_ecc,
+ .free = w35n01jw_ooblayout_free,
+};
+
static int w25m02gv_select_target(struct spinand_device *spinand,
unsigned int target)
{
@@ -110,6 +152,17 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants_w25xxgv),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ SPINAND_INFO("W35N01JW",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdc),
+ NAND_MEMORG(1, 4096, 128, 64, 512, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w35n01jw,
+ &write_cache_variants_w35n01jw,
+ &update_cache_variants_w35n01jw),
+ SPINAND_HAS_OCTAL_DTR_BIT | SPINAND_HAS_POR_CMD_BIT |
+ SPINAND_HAS_CR_FEAT_BIT,
+ SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL)),
+
};
static int winbond_spinand_init(struct spinand_device *spinand)
--
2.25.1
prev parent reply other threads:[~2021-10-11 21:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-11 20:46 [PATCH v2 00/14] mtd: spinand: Add Octal DTR SPI (8D-8D-8D) mode support Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 01/14] spi: spi-mem: Add DTR templates for cmd, address, dummy and data phase Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 02/14] mtd: spinand: Add enum spinand_proto to indicate current SPI IO mode Apurva Nandan
2021-10-12 6:39 ` Boris Brezillon
2021-10-11 20:46 ` [PATCH v2 03/14] mtd: spinand: Patch spi_mem_op for the SPI IO protocol using reg_proto Apurva Nandan
2021-10-12 6:40 ` Boris Brezillon
2021-10-11 20:46 ` [PATCH v2 04/14] mtd: spinand: Fix odd byte addr and data phase in read and write reg op for Octal DTR mode Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 05/14] mtd: spinand: Add adjust_op() in manufacturer_ops to modify the ops for manufacturer specific changes Apurva Nandan
2021-10-12 6:54 ` Boris Brezillon
2021-10-11 20:46 ` [PATCH v2 06/14] mtd: spinand: Add macros for Octal DTR page read and write operations Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 07/14] mtd: spinand: Allow enabling Octal DTR mode in the core Apurva Nandan
2021-10-12 7:14 ` Boris Brezillon
2021-10-11 20:46 ` [PATCH v2 08/14] mtd: spinand: winbond: Add support for write volatile configuration register op Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 09/14] mtd: spinand: winbond: Add octal_dtr_enable() for manufacturer_ops Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 10/14] mtd: spinand: Add support for Power-on-Reset (PoR) instruction Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 11/14] mtd: spinand: Perform Power-on-Reset on the flash in mtd_suspend() Apurva Nandan
2021-10-12 7:25 ` Boris Brezillon
2021-10-11 20:46 ` [PATCH v2 12/14] mtd: spinand: Add adjust_op() in Winbond manufacturer_ops Apurva Nandan
2021-10-11 20:46 ` [PATCH v2 13/14] mtd: spinand: winbond: Rename cache op_variants struct variable Apurva Nandan
2021-10-11 20:46 ` Apurva Nandan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211011204619.81893-15-a-nandan@ti.com \
--to=a-nandan@ti.com \
--cc=boris.brezillon@collabora.com \
--cc=broonie@kernel.org \
--cc=christophe.kerello@foss.st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=patrice.chotard@foss.st.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®