From: Martin Kaiser <martin@kaiser.cx>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Michael Straube <straube.linux@gmail.com>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Martin Kaiser <martin@kaiser.cx>
Subject: [PATCH 5/5] staging: r8188eu: remove the sreset_priv structure
Date: Sun, 24 Oct 2021 20:04:48 +0200 [thread overview]
Message-ID: <20211024180448.20624-6-martin@kaiser.cx> (raw)
In-Reply-To: <20211024180448.20624-1-martin@kaiser.cx>
last_tx_time from struct sreset_priv is no longer used now that
last_tx_complete_time is gone.
This patch removes last_tx_time. This was the last remaining component of
struct sreset_priv, we can now remove the structure itself.
After removing include/rtw_sreset.h, it turned out that some definitions
in .c files were pulled in via rtw_sreset.h. Add the required include
files directly to make compilation succeed without rtw_sreset.h.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
drivers/staging/r8188eu/Makefile | 1 -
drivers/staging/r8188eu/core/rtw_mlme_ext.c | 2 ++
drivers/staging/r8188eu/core/rtw_sreset.c | 19 -------------------
.../staging/r8188eu/include/rtl8188e_hal.h | 1 -
.../staging/r8188eu/include/rtl8188e_sreset.h | 1 -
drivers/staging/r8188eu/include/rtw_sreset.h | 19 -------------------
drivers/staging/r8188eu/os_dep/os_intfs.c | 4 ----
.../staging/r8188eu/os_dep/usb_ops_linux.c | 8 ++------
8 files changed, 4 insertions(+), 51 deletions(-)
delete mode 100644 drivers/staging/r8188eu/core/rtw_sreset.c
delete mode 100644 drivers/staging/r8188eu/include/rtw_sreset.h
diff --git a/drivers/staging/r8188eu/Makefile b/drivers/staging/r8188eu/Makefile
index a0a8e150da3f..62933b0f29b5 100644
--- a/drivers/staging/r8188eu/Makefile
+++ b/drivers/staging/r8188eu/Makefile
@@ -51,7 +51,6 @@ r8188eu-y = \
core/rtw_recv.o \
core/rtw_rf.o \
core/rtw_security.o \
- core/rtw_sreset.o \
core/rtw_sta_mgt.o \
core/rtw_wlan_util.o \
core/rtw_xmit.o
diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
index 7b372374e638..55c3d4a6faeb 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
@@ -11,6 +11,8 @@
#include "../include/mlme_osdep.h"
#include "../include/recv_osdep.h"
#include "../include/rtl8188e_sreset.h"
+#include "../include/rtl8188e_xmit.h"
+#include "../include/rtl8188e_dm.h"
static struct mlme_handler mlme_sta_tbl[] = {
{WIFI_ASSOCREQ, "OnAssocReq", &OnAssocReq},
diff --git a/drivers/staging/r8188eu/core/rtw_sreset.c b/drivers/staging/r8188eu/core/rtw_sreset.c
deleted file mode 100644
index 1df46673bddd..000000000000
--- a/drivers/staging/r8188eu/core/rtw_sreset.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 2007 - 2012 Realtek Corporation. */
-
-#include "../include/rtw_sreset.h"
-
-void sreset_init_value(struct adapter *padapter)
-{
- struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
- struct sreset_priv *psrtpriv = &pHalData->srestpriv;
-
- psrtpriv->last_tx_time = 0;
-}
-void sreset_reset_value(struct adapter *padapter)
-{
- struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
- struct sreset_priv *psrtpriv = &pHalData->srestpriv;
-
- psrtpriv->last_tx_time = 0;
-}
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index ced7e12d9013..d7db1dfc39d0 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -256,7 +256,6 @@ struct hal_data_8188e {
struct dm_priv dmpriv;
struct odm_dm_struct odmpriv;
- struct sreset_priv srestpriv;
u8 CurAntenna;
u8 AntDivCfg;
diff --git a/drivers/staging/r8188eu/include/rtl8188e_sreset.h b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
index 5d7fec78a27b..bb8b0048fbf9 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_sreset.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_sreset.h
@@ -6,7 +6,6 @@
#include "osdep_service.h"
#include "drv_types.h"
-#include "rtw_sreset.h"
void rtl8188e_sreset_xmit_status_check(struct adapter *padapter);
void rtl8188e_sreset_linked_status_check(struct adapter *padapter);
diff --git a/drivers/staging/r8188eu/include/rtw_sreset.h b/drivers/staging/r8188eu/include/rtw_sreset.h
deleted file mode 100644
index ff84cdc02c2c..000000000000
--- a/drivers/staging/r8188eu/include/rtw_sreset.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/* Copyright(c) 2007 - 2012 Realtek Corporation. */
-
-#ifndef _RTW_SRESET_C_
-#define _RTW_SRESET_C_
-
-#include "osdep_service.h"
-#include "drv_types.h"
-
-struct sreset_priv {
- unsigned long last_tx_time;
-};
-
-#include "rtl8188e_hal.h"
-
-void sreset_init_value(struct adapter *padapter);
-void sreset_reset_value(struct adapter *padapter);
-
-#endif
diff --git a/drivers/staging/r8188eu/os_dep/os_intfs.c b/drivers/staging/r8188eu/os_dep/os_intfs.c
index 96e9897085fe..10059240bf54 100644
--- a/drivers/staging/r8188eu/os_dep/os_intfs.c
+++ b/drivers/staging/r8188eu/os_dep/os_intfs.c
@@ -13,7 +13,6 @@
#include "../include/rtw_br_ext.h"
#include "../include/rtl8188e_led.h"
#include "../include/rtl8188e_dm.h"
-#include "../include/rtw_sreset.h"
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek Wireless Lan Driver");
@@ -467,7 +466,6 @@ u8 rtw_reset_drv_sw(struct adapter *padapter)
_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY | _FW_UNDER_LINKING);
- sreset_reset_value(padapter);
pwrctrlpriv->pwr_state_check_cnts = 0;
/* mlmeextpriv */
@@ -537,8 +535,6 @@ u8 rtw_init_drv_sw(struct adapter *padapter)
rtl8188e_init_dm_priv(padapter);
rtl8188eu_InitSwLeds(padapter);
- sreset_init_value(padapter);
-
spin_lock_init(&padapter->br_ext_lock);
exit:
diff --git a/drivers/staging/r8188eu/os_dep/usb_ops_linux.c b/drivers/staging/r8188eu/os_dep/usb_ops_linux.c
index 57a435138bf0..ef2ea68ae873 100644
--- a/drivers/staging/r8188eu/os_dep/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/os_dep/usb_ops_linux.c
@@ -5,7 +5,7 @@
#include "../include/drv_types.h"
#include "../include/usb_ops_linux.h"
-#include "../include/rtw_sreset.h"
+#include "../include/rtl8188e_recv.h"
unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr)
{
@@ -176,11 +176,7 @@ u32 rtw_write_port(struct adapter *padapter, u32 addr, u32 cnt, u8 *wmem)
pxmitbuf);/* context is pxmitbuf */
status = usb_submit_urb(purb, GFP_ATOMIC);
- if (!status) {
- struct hal_data_8188e *haldata = GET_HAL_DATA(padapter);
-
- haldata->srestpriv.last_tx_time = jiffies;
- } else {
+ if (status) {
rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_WRITE_PORT_ERR);
DBG_88E("usb_write_port, status =%d\n", status);
--
2.20.1
next prev parent reply other threads:[~2021-10-24 18:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-24 18:04 [PATCH 0/5] staging: r8188eu: remove struct sreset_priv Martin Kaiser
2021-10-24 18:04 ` [PATCH 1/5] staging: r8188eu: silent_reset_inprogress is never read Martin Kaiser
2021-10-24 18:04 ` [PATCH 2/5] staging: r8188eu: wifi_error_status is write-only Martin Kaiser
2021-10-24 18:04 ` [PATCH 3/5] staging: r8188eu: silentreset_mutex is unused Martin Kaiser
2021-10-24 18:04 ` [PATCH 4/5] staging: r8188eu: remove last_tx_complete_time Martin Kaiser
2021-10-24 18:04 ` Martin Kaiser [this message]
2021-10-25 7:09 ` [PATCH 0/5] staging: r8188eu: remove struct sreset_priv Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211024180448.20624-6-martin@kaiser.cx \
--to=martin@kaiser.cx \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®