From: Nicolai Stange <nstange@suse.de>
To: "Stephan Müller" <smueller@chronox.de>,
"Herbert Xu" <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>
Cc: Torsten Duwe <duwe@suse.de>,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
Nicolai Stange <nstange@suse.de>
Subject: [PATCH 3/6] crypto: DRBG - move dynamic ->reseed_threshold adjustments to __drbg_seed()
Date: Mon, 25 Oct 2021 11:25:22 +0200 [thread overview]
Message-ID: <20211025092525.12805-4-nstange@suse.de> (raw)
In-Reply-To: <20211025092525.12805-1-nstange@suse.de>
Since commit 42ea507fae1a ("crypto: drbg - reseed often if seedsource is
degraded"), the maximum seed lifetime represented by ->reseed_threshold
gets temporarily lowered if the get_random_bytes() source cannot provide
sufficient entropy yet, as is common during boot, and restored back to
the original value again once that has changed.
More specifically, if the add_random_ready_callback() invoked from
drbg_prepare_hrng() in the course of DRBG instantiation does not return
-EALREADY, that is, if get_random_bytes() has not been fully initialized
at this point yet, drbg_prepare_hrng() will lower ->reseed_threshold
to a value of 50. The drbg_async_seed() scheduled from said
random_ready_callback will eventually restore the original value.
A future patch will replace the random_ready_callback based notification
mechanism and thus, there will be no add_random_ready_callback() return
value anymore which could get compared to -EALREADY.
However, there's __drbg_seed() which gets invoked in the course of both,
the DRBG instantiation as well as the eventual reseeding from
get_random_bytes() in aforementioned drbg_async_seed(), if any. Moreover,
it knows about the get_random_bytes() initialization state by the time the
seed data had been obtained from it: the new_seed_state argument introduced
with the previous patch would get set to DRBG_SEED_STATE_PARTIAL in case
get_random_bytes() had not been fully initialized yet and to
DRBG_SEED_STATE_FULL otherwise. Thus, __drbg_seed() provides a convenient
alternative for managing that ->reseed_threshold lowering and restoring at
a central place.
Move all ->reseed_threshold adjustment code from drbg_prepare_hrng() and
drbg_async_seed() respectively to __drbg_seed(). Make __drbg_seed()
lower the ->reseed_threshold to 50 in case its new_seed_state argument
equals DRBG_SEED_STATE_PARTIAL and let it restore the original value
otherwise.
There is no change in behaviour.
Signed-off-by: Nicolai Stange <nstange@suse.de>
---
crypto/drbg.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/crypto/drbg.c b/crypto/drbg.c
index 55fe8caf569a..6aad210f101a 100644
--- a/crypto/drbg.c
+++ b/crypto/drbg.c
@@ -1047,6 +1047,27 @@ static inline int __drbg_seed(struct drbg_state *drbg, struct list_head *seed,
/* 10.1.1.2 / 10.1.1.3 step 5 */
drbg->reseed_ctr = 1;
+ switch (drbg->seeded) {
+ case DRBG_SEED_STATE_UNSEEDED:
+ /* Impossible, but handle it to silence compiler warnings. */
+ fallthrough;
+ case DRBG_SEED_STATE_PARTIAL:
+ /*
+ * Require frequent reseeds until the seed source is
+ * fully initialized.
+ */
+ drbg->reseed_threshold = 50;
+ break;
+
+ case DRBG_SEED_STATE_FULL:
+ /*
+ * Seed source has become fully initialized, frequent
+ * reseeds no longer required.
+ */
+ drbg->reseed_threshold = drbg_max_requests(drbg);
+ break;
+ }
+
return ret;
}
@@ -1095,9 +1116,6 @@ static void drbg_async_seed(struct work_struct *work)
__drbg_seed(drbg, &seedlist, true, DRBG_SEED_STATE_FULL);
- if (drbg->seeded == DRBG_SEED_STATE_FULL)
- drbg->reseed_threshold = drbg_max_requests(drbg);
-
unlock:
mutex_unlock(&drbg->drbg_mutex);
@@ -1534,12 +1552,6 @@ static int drbg_prepare_hrng(struct drbg_state *drbg)
return err;
}
- /*
- * Require frequent reseeds until the seed source is fully
- * initialized.
- */
- drbg->reseed_threshold = 50;
-
return err;
}
--
2.26.2
next prev parent reply other threads:[~2021-10-25 9:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 9:25 [PATCH 0/6] crypto: DRBG - improve 'nopr' reseeding Nicolai Stange
2021-10-25 9:25 ` [PATCH 1/6] crypto: DRBG - prepare for more fine-grained tracking of seeding state Nicolai Stange
2021-10-26 8:37 ` Stephan Müller
2021-10-25 9:25 ` [PATCH 2/6] crypto: DRBG - track whether DRBG was seeded with !rng_is_initialized() Nicolai Stange
2021-10-26 8:41 ` Stephan Müller
2021-10-25 9:25 ` Nicolai Stange [this message]
2021-10-26 9:05 ` [PATCH 3/6] crypto: DRBG - move dynamic ->reseed_threshold adjustments to __drbg_seed() Stephan Müller
2021-10-25 9:25 ` [PATCH 4/6] crypto: DRBG - make reseeding from get_random_bytes() synchronous Nicolai Stange
2021-10-26 9:19 ` Stephan Müller
2021-10-27 9:19 ` Nicolai Stange
2021-10-27 18:44 ` Stephan Müller
2021-10-25 9:25 ` [PATCH 5/6] crypto: DRBG - make drbg_prepare_hrng() handle jent instantiation errors Nicolai Stange
2021-10-26 9:19 ` Stephan Müller
2021-10-25 9:25 ` [PATCH 6/6] crypto: DRBG - reseed 'nopr' drbgs periodically from get_random_bytes() Nicolai Stange
2021-10-26 9:33 ` Stephan Müller
2021-10-26 8:33 ` [PATCH 0/6] crypto: DRBG - improve 'nopr' reseeding Stephan Müller
2021-10-27 8:40 ` Nicolai Stange
2021-10-27 18:43 ` Stephan Müller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211025092525.12805-4-nstange@suse.de \
--to=nstange@suse.de \
--cc=davem@davemloft.net \
--cc=duwe@suse.de \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=smueller@chronox.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®