From: Valentin Schneider <valentin.schneider@arm.com>
To: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@kernel.org>,
Frederic Weisbecker <frederic@kernel.org>
Subject: [PATCH] sched: Tweak default dynamic preempt mode selection
Date: Fri, 5 Nov 2021 10:40:35 +0000 [thread overview]
Message-ID: <20211105104035.3112162-1-valentin.schneider@arm.com> (raw)
Commit c597bfddc9e9 ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select
CONFIG_PREEMPT_BEHAVIOUR=y
rather than
CONFIG_PREEMPT=y
to get a preemptible kernel. This means all arch config files need to be
updated - right now arm64 defconfig selects CONFIG_PREEMPT=y but ends up
with CONFIG_PREEMPT_NONE_BEHAVIOUR=y.
Instead, have CONFIG_*PREEMPT be the selectable configs again, and make
them select their _BEHAVIOUR equivalent if CONFIG_PREEMPT_DYNAMIC is set.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
---
kernel/Kconfig.preempt | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
index 60f1bfc3c7b2..25e8d6a3d9fa 100644
--- a/kernel/Kconfig.preempt
+++ b/kernel/Kconfig.preempt
@@ -1,12 +1,21 @@
# SPDX-License-Identifier: GPL-2.0-only
+config PREEMPT_NONE_BEHAVIOUR
+ bool
+
+config PREEMPT_VOLUNTARY_BEHAVIOUR
+ bool
+
+config PREEMPT_BEHAVIOUR
+ bool
+
choice
prompt "Preemption Model"
- default PREEMPT_NONE_BEHAVIOUR
+ default PREEMPT_NONE
-config PREEMPT_NONE_BEHAVIOUR
+config PREEMPT_NONE
bool "No Forced Preemption (Server)"
- select PREEMPT_NONE if !PREEMPT_DYNAMIC
+ select PREEMPT_NONE_BEHAVIOUR if PREEMPT_DYNAMIC
help
This is the traditional Linux preemption model, geared towards
throughput. It will still provide good latencies most of the
@@ -18,10 +27,10 @@ config PREEMPT_NONE_BEHAVIOUR
raw processing power of the kernel, irrespective of scheduling
latencies.
-config PREEMPT_VOLUNTARY_BEHAVIOUR
+config PREEMPT_VOLUNTARY
bool "Voluntary Kernel Preemption (Desktop)"
depends on !ARCH_NO_PREEMPT
- select PREEMPT_VOLUNTARY if !PREEMPT_DYNAMIC
+ select PREEMPT_VOLUNTARY_BEHAVIOUR if PREEMPT_DYNAMIC
help
This option reduces the latency of the kernel by adding more
"explicit preemption points" to the kernel code. These new
@@ -37,10 +46,12 @@ config PREEMPT_VOLUNTARY_BEHAVIOUR
Select this if you are building a kernel for a desktop system.
-config PREEMPT_BEHAVIOUR
+config PREEMPT
bool "Preemptible Kernel (Low-Latency Desktop)"
depends on !ARCH_NO_PREEMPT
- select PREEMPT
+ select PREEMPTION
+ select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
+ select PREEMPT_BEHAVIOUR if PREEMPT_DYNAMIC
help
This option reduces the latency of the kernel by making
all kernel code (that is not executing in a critical section)
@@ -75,17 +86,6 @@ config PREEMPT_RT
endchoice
-config PREEMPT_NONE
- bool
-
-config PREEMPT_VOLUNTARY
- bool
-
-config PREEMPT
- bool
- select PREEMPTION
- select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
-
config PREEMPT_COUNT
bool
--
2.25.1
next reply other threads:[~2021-11-05 10:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-05 10:40 Valentin Schneider [this message]
2021-11-06 4:40 ` Mike Galbraith
2021-11-08 11:17 ` Valentin Schneider
2021-11-08 12:27 ` Mike Galbraith
2021-11-08 15:21 ` Valentin Schneider
2021-11-09 5:30 ` Mike Galbraith
2021-11-09 9:52 ` Valentin Schneider
2021-11-09 11:00 ` Mike Galbraith
2021-11-09 12:19 ` Valentin Schneider
2021-11-09 13:31 ` Mike Galbraith
2021-11-06 5:05 ` kernel test robot
2021-11-08 12:00 ` Valentin Schneider
2021-11-06 5:33 ` kernel test robot
2021-11-06 7:58 ` kernel test robot
2021-11-09 10:25 ` Frederic Weisbecker
2021-11-10 0:03 ` Valentin Schneider
2021-11-10 5:44 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211105104035.3112162-1-valentin.schneider@arm.com \
--to=valentin.schneider@arm.com \
--cc=frederic@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®