From: Nikita Shubin <nikita.shubin@maquefel.me>
To: Aurelien Jarno <aurelien@aurel32.net>
Cc: guoren@kernel.org, anup@brainfault.org, atish.patra@wdc.com,
maz@kernel.org, tglx@linutronix.de, palmer@dabbelt.com,
linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
Guo Ren <guoren@linux.alibaba.com>,
Vincent Pelletier <plr.vincent@gmail.com>,
stable@vger.kernel.org
Subject: Re: [PATCH V7] irqchip/sifive-plic: Fixup EOI failed when masked
Date: Sat, 6 Nov 2021 16:28:19 +0300 [thread overview]
Message-ID: <20211106162819.1f5c08ed@redslave.neermore.group> (raw)
In-Reply-To: <YYZxB0LN2iYhj+nz@aurel32.net>
Hello, Aurelien!
On Sat, 6 Nov 2021 13:11:51 +0100
Aurelien Jarno <aurelien@aurel32.net> wrote:
> On 2021-11-05 17:47, guoren@kernel.org wrote:
> > From: Guo Ren <guoren@linux.alibaba.com>
> >
> > When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in the
> > driver, only the first interrupt could be handled, and continue irq
> > is blocked by hw. Because the riscv plic couldn't complete masked
> > irq source which has been disabled in enable register. The bug was
> > firstly reported in [1].
> >
> > Here is the description of Interrupt Completion in PLIC spec [2]:
> >
> > The PLIC signals it has completed executing an interrupt handler by
> > writing the interrupt ID it received from the claim to the
> > claim/complete register. The PLIC does not check whether the
> > completion ID is the same as the last claim ID for that target. If
> > the completion ID does not match an interrupt source that is
> > currently enabled for the target, the ^^ ^^^^^^^^^ ^^^^^^^
> > completion is silently ignored.
> >
> > [1]
> > http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
> > [2]
> > https://github.com/riscv/riscv-plic-spec/blob/8bc15a35d07c9edf7b5d23fec9728302595ffc4d/riscv-plic.adoc
> >
> > Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow")
> > Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
> > Tested-by: Nikita Shubin <nikita.shubin@maquefel.me>
> > Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> > Cc: stable@vger.kernel.org
> > Cc: Anup Patel <anup@brainfault.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Marc Zyngier <maz@kernel.org>
> > Cc: Palmer Dabbelt <palmer@dabbelt.com>
> > Cc: Atish Patra <atish.patra@wdc.com>
> > Cc: Nikita Shubin <nikita.shubin@maquefel.me>
> > Cc: incent Pelletier <plr.vincent@gmail.com>
>
> Thanks for this patch. From what I understand, it fixes among other
> things the possibility to read the DA9063 RTC more than once.
Well RTC works definitely, through you need some patch to use it as a
wakeup source:
https://lkml.org/lkml/2021/11/1/800
and, AFAIK currently SiFive Unmatched lack's PM.
I still haven't tested the Watchdog and Onkey.
>
> Does it means that we could now enable it in the device tree? I mean
> something like the following patch that unfortunately I can't test
> now:
Adding RTC is really useful and adding Watchdog along with Onkey
shouldn't make any harm.
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index
> 2e4ea84f27e7..c357b48582f7 100644 ---
> a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++
> b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -70,6 +70,10
> @@ pmic@58 { interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
>
> + onkey {
> + compatible = "dlg,da9063-onkey";
> + };
> +
> regulators {
> vdd_bcore1: bcore1 {
> regulator-min-microvolt = <900000>;
> @@ -205,6 +209,14 @@ vdd_ldo11: ldo11 {
> regulator-always-on;
> };
> };
> +
> + rtc {
> + compatible = "dlg,da9063-rtc";
> + };
> +
> + wdt {
> + compatible = "dlg,da9063-watchdog";
> + };
> };
> };
>
next prev parent reply other threads:[~2021-11-06 13:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-05 9:47 guoren
2021-11-06 12:11 ` Aurelien Jarno
2021-11-06 13:28 ` Nikita Shubin [this message]
2021-11-06 13:45 ` Anup Patel
2021-11-07 13:09 ` Guo Ren
2021-11-07 13:13 ` Marc Zyngier
2021-11-06 14:26 ` [irqchip: irq/irqchip-fixes] " irqchip-bot for Guo Ren
2021-11-12 16:15 ` irqchip-bot for Guo Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211106162819.1f5c08ed@redslave.neermore.group \
--to=nikita.shubin@maquefel.me \
--cc=anup@brainfault.org \
--cc=atish.patra@wdc.com \
--cc=aurelien@aurel32.net \
--cc=guoren@kernel.org \
--cc=guoren@linux.alibaba.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=palmer@dabbelt.com \
--cc=plr.vincent@gmail.com \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®