From: Arnd Bergmann <arnd@kernel.org>
To: linux-gpio@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/8] gpiolib: shrink further
Date: Tue, 9 Nov 2021 11:02:04 +0100 [thread overview]
Message-ID: <20211109100207.2474024-6-arnd@kernel.org> (raw)
In-Reply-To: <20211109100207.2474024-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
gpio_set_debounce() only has a single user, which is trivially
converted to gpiod_set_debounce(), while gpio_cansleep() and
devm_gpio_free() have no users at all.
Remove them all to shrink the old gpio interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../driver-api/driver-model/devres.rst | 1 -
Documentation/driver-api/gpio/legacy.rst | 2 --
drivers/gpio/gpiolib-devres.c | 25 ----------------
drivers/input/touchscreen/ads7846.c | 3 +-
include/linux/gpio.h | 29 -------------------
5 files changed, 2 insertions(+), 58 deletions(-)
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index 148e19381b79..52821478decd 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -277,7 +277,6 @@ GPIO
devm_gpiochip_add_data()
devm_gpio_request()
devm_gpio_request_one()
- devm_gpio_free()
I2C
devm_i2c_new_dummy_device()
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index 06c05e2d62c1..eae185f771d7 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -238,8 +238,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
## gpio_free_array()
gpio_free()
- gpio_set_debounce()
-
Claiming and Releasing GPIOs
diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
index 79da85d17b71..55465ead492f 100644
--- a/drivers/gpio/gpiolib-devres.c
+++ b/drivers/gpio/gpiolib-devres.c
@@ -385,13 +385,6 @@ static void devm_gpio_release(struct device *dev, void *res)
gpio_free(*gpio);
}
-static int devm_gpio_match(struct device *dev, void *res, void *data)
-{
- unsigned *this = res, *gpio = data;
-
- return *this == *gpio;
-}
-
/**
* devm_gpio_request - request a GPIO for a managed device
* @dev: device to request the GPIO for
@@ -459,24 +452,6 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
}
EXPORT_SYMBOL_GPL(devm_gpio_request_one);
-/**
- * devm_gpio_free - free a GPIO
- * @dev: device to free GPIO for
- * @gpio: GPIO to free
- *
- * Except for the extra @dev argument, this function takes the
- * same arguments and performs the same function as gpio_free().
- * This function instead of gpio_free() should be used to manually
- * free GPIOs allocated with devm_gpio_request().
- */
-void devm_gpio_free(struct device *dev, unsigned int gpio)
-{
-
- WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match,
- &gpio));
-}
-EXPORT_SYMBOL_GPL(devm_gpio_free);
-
static void devm_gpio_chip_release(void *data)
{
struct gpio_chip *gc = data;
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index a25a77dd9a32..d0664e3b89bb 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -27,6 +27,7 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -1018,7 +1019,7 @@ static int ads7846_setup_pendown(struct spi_device *spi,
ts->gpio_pendown = pdata->gpio_pendown;
if (pdata->gpio_pendown_debounce)
- gpio_set_debounce(pdata->gpio_pendown,
+ gpiod_set_debounce(gpio_to_desc(pdata->gpio_pendown),
pdata->gpio_pendown_debounce);
} else {
dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index c19256f67e02..64cc8f09eba8 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -117,11 +117,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
}
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
-}
-
static inline int gpio_get_value_cansleep(unsigned gpio)
{
return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
@@ -140,11 +135,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
return gpiod_set_raw_value(gpio_to_desc(gpio), value);
}
-static inline int gpio_cansleep(unsigned gpio)
-{
- return gpiod_cansleep(gpio_to_desc(gpio));
-}
-
static inline int gpio_to_irq(unsigned gpio)
{
return gpiod_to_irq(gpio_to_desc(gpio));
@@ -181,8 +171,6 @@ struct device;
int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
int devm_gpio_request_one(struct device *dev, unsigned gpio,
unsigned long flags, const char *label);
-void devm_gpio_free(struct device *dev, unsigned int gpio);
-
#else /* ! CONFIG_GPIOLIB */
#include <linux/kernel.h>
@@ -239,11 +227,6 @@ static inline int gpio_direction_output(unsigned gpio, int value)
return -ENOSYS;
}
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return -ENOSYS;
-}
-
static inline int gpio_get_value(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
@@ -257,13 +240,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
WARN_ON(1);
}
-static inline int gpio_cansleep(unsigned gpio)
-{
- /* GPIO can never have been requested or set as {in,out}put */
- WARN_ON(1);
- return 0;
-}
-
static inline int gpio_get_value_cansleep(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
@@ -319,11 +295,6 @@ static inline int devm_gpio_request_one(struct device *dev, unsigned gpio,
return -EINVAL;
}
-static inline void devm_gpio_free(struct device *dev, unsigned int gpio)
-{
- WARN_ON(1);
-}
-
#endif /* ! CONFIG_GPIOLIB */
#endif /* __LINUX_GPIO_H */
--
2.29.2
next prev parent reply other threads:[~2021-11-09 10:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 10:01 [PATCH v2 0/8] gpiolib header cleanup Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 1/8] gpiolib: remove irq_to_gpio() definition Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 2/8] gpiolib: remove empty asm/gpio.h files Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 3/8] gpiolib: coldfire: remove custom asm/gpio.h Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 4/8] gpiolib: remove asm-generic/gpio.h Arnd Bergmann
2021-11-09 10:19 ` Andy Shevchenko
2021-11-09 10:02 ` Arnd Bergmann [this message]
2021-11-09 10:24 ` [PATCH v2 5/8] gpiolib: shrink further Andy Shevchenko
2021-11-09 11:18 ` Arnd Bergmann
2021-11-09 22:17 ` Linus Walleij
2021-11-10 12:39 ` Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 6/8] gpiolib: remove legacy gpio_export Arnd Bergmann
2021-11-09 10:30 ` Andy Shevchenko
2021-11-09 10:50 ` Arnd Bergmann
2021-11-09 20:42 ` Linus Walleij
2021-11-09 22:46 ` Arnd Bergmann
2021-11-10 0:03 ` Linus Walleij
2021-11-09 20:33 ` Linus Walleij
2021-11-09 10:02 ` [PATCH v2 7/8] gpiolib: remove gpio_to_chip Arnd Bergmann
2021-11-09 10:32 ` Andy Shevchenko
2021-11-09 10:54 ` Arnd Bergmann
2021-11-09 10:02 ` [PATCH v2 8/8] gpiolib: split linux/gpio/driver.h out of linux/gpio.h Arnd Bergmann
2021-11-09 10:34 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109100207.2474024-6-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=brgl@bgdev.pl \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome