mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/8] KVM: nVMX: Clean up x2APIC MSR handling for L2
Date: Tue,  9 Nov 2021 17:28:31 +0100	[thread overview]
Message-ID: <20211109162835.99475-5-vkuznets@redhat.com> (raw)
In-Reply-To: <20211109162835.99475-1-vkuznets@redhat.com>

From: Sean Christopherson <seanjc@google.com>

Clean up the x2APIC MSR bitmap intereption code for L2, which is the last
holdout of open coded bitmap manipulations.  Freshen up the SDM/PRM
comment, rename the function to make it abundantly clear the funky
behavior is x2APIC specific, and explain _why_ vmcs01's bitmap is ignored
(the previous comment was flat out wrong for x2APIC behavior).

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/vmx/nested.c | 53 +++++++++++----------------------------
 arch/x86/kvm/vmx/vmx.h    |  8 ++++++
 2 files changed, 22 insertions(+), 39 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index c569a135ca48..341c50816822 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -525,44 +525,19 @@ static int nested_vmx_check_tpr_shadow_controls(struct kvm_vcpu *vcpu,
 }
 
 /*
- * If a msr is allowed by L0, we should check whether it is allowed by L1.
- * The corresponding bit will be cleared unless both of L0 and L1 allow it.
+ * For x2APIC MSRs, ignore the vmcs01 bitmap.  L1 can enable x2APIC without L1
+ * itself utilizing x2APIC.  All MSRs were previously set to be intercepted,
+ * only the "disable intercept" case needs to be handled.
  */
-static void nested_vmx_disable_intercept_for_msr(unsigned long *msr_bitmap_l1,
-					       unsigned long *msr_bitmap_nested,
-					       u32 msr, int type)
+static void nested_vmx_disable_intercept_for_x2apic_msr(unsigned long *msr_bitmap_l1,
+							unsigned long *msr_bitmap_l0,
+							u32 msr, int type)
 {
-	int f = sizeof(unsigned long);
+	if (type & MSR_TYPE_R && !vmx_test_msr_bitmap_read(msr_bitmap_l1, msr))
+		vmx_clear_msr_bitmap_read(msr_bitmap_l0, msr);
 
-	/*
-	 * See Intel PRM Vol. 3, 20.6.9 (MSR-Bitmap Address). Early manuals
-	 * have the write-low and read-high bitmap offsets the wrong way round.
-	 * We can control MSRs 0x00000000-0x00001fff and 0xc0000000-0xc0001fff.
-	 */
-	if (msr <= 0x1fff) {
-		if (type & MSR_TYPE_R &&
-		   !test_bit(msr, msr_bitmap_l1 + 0x000 / f))
-			/* read-low */
-			__clear_bit(msr, msr_bitmap_nested + 0x000 / f);
-
-		if (type & MSR_TYPE_W &&
-		   !test_bit(msr, msr_bitmap_l1 + 0x800 / f))
-			/* write-low */
-			__clear_bit(msr, msr_bitmap_nested + 0x800 / f);
-
-	} else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) {
-		msr &= 0x1fff;
-		if (type & MSR_TYPE_R &&
-		   !test_bit(msr, msr_bitmap_l1 + 0x400 / f))
-			/* read-high */
-			__clear_bit(msr, msr_bitmap_nested + 0x400 / f);
-
-		if (type & MSR_TYPE_W &&
-		   !test_bit(msr, msr_bitmap_l1 + 0xc00 / f))
-			/* write-high */
-			__clear_bit(msr, msr_bitmap_nested + 0xc00 / f);
-
-	}
+	if (type & MSR_TYPE_W && !vmx_test_msr_bitmap_write(msr_bitmap_l1, msr))
+		vmx_clear_msr_bitmap_write(msr_bitmap_l0, msr);
 }
 
 static inline void enable_x2apic_msr_intercepts(unsigned long *msr_bitmap)
@@ -631,7 +606,7 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
 	/*
 	 * To keep the control flow simple, pay eight 8-byte writes (sixteen
 	 * 4-byte writes on 32-bit systems) up front to enable intercepts for
-	 * the x2APIC MSR range and selectively disable them below.
+	 * the x2APIC MSR range and selectively toggle those relevant to L2.
 	 */
 	enable_x2apic_msr_intercepts(msr_bitmap_l0);
 
@@ -650,17 +625,17 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
 			}
 		}
 
-		nested_vmx_disable_intercept_for_msr(
+		nested_vmx_disable_intercept_for_x2apic_msr(
 			msr_bitmap_l1, msr_bitmap_l0,
 			X2APIC_MSR(APIC_TASKPRI),
 			MSR_TYPE_R | MSR_TYPE_W);
 
 		if (nested_cpu_has_vid(vmcs12)) {
-			nested_vmx_disable_intercept_for_msr(
+			nested_vmx_disable_intercept_for_x2apic_msr(
 				msr_bitmap_l1, msr_bitmap_l0,
 				X2APIC_MSR(APIC_EOI),
 				MSR_TYPE_W);
-			nested_vmx_disable_intercept_for_msr(
+			nested_vmx_disable_intercept_for_x2apic_msr(
 				msr_bitmap_l1, msr_bitmap_l0,
 				X2APIC_MSR(APIC_SELF_IPI),
 				MSR_TYPE_W);
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 83a14b61c80f..86c093da0d63 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -400,6 +400,14 @@ static inline void vmx_set_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr,
 
 void vmx_update_cpu_dirty_logging(struct kvm_vcpu *vcpu);
 
+/*
+ * Note, early Intel manuals have the write-low and read-high bitmap offsets
+ * the wrong way round.  The bitmaps control MSRs 0x00000000-0x00001fff and
+ * 0xc0000000-0xc0001fff.  The former (low) uses bytes 0-0x3ff for reads and
+ * 0x800-0xbff for writes.  The latter (high) uses 0x400-0x7ff for reads and
+ * 0xc00-0xfff for writes.  MSRs not covered by either of the ranges always
+ * VM-Exit.
+ */
 #define __BUILD_VMX_MSR_BITMAP_HELPER(rtype, action, bitop, access, base)      \
 static inline rtype vmx_##action##_msr_bitmap_##access(unsigned long *bitmap,  \
 						       u32 msr)		       \
-- 
2.31.1


  parent reply	other threads:[~2021-11-09 16:29 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-09 16:28 [PATCH v4 0/8] KVM: nVMX: Enlightened MSR Bitmap feature for Hyper-V on KVM (+ KVM: x86: MSR filtering and related fixes) Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 1/8] KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 2/8] KVM: nVMX: Handle dynamic MSR intercept toggling Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 3/8] KVM: VMX: Macrofy the MSR bitmap getters and setters Vitaly Kuznetsov
2021-11-09 16:28 ` Vitaly Kuznetsov [this message]
2021-11-09 16:28 ` [PATCH v4 5/8] KVM: nVMX: Don't use Enlightened MSR Bitmap for L3 Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 6/8] KVM: VMX: Introduce vmx_msr_bitmap_l01_changed() helper Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 7/8] KVM: nVMX: Track whether changes in L0 require MSR bitmap for L2 to be rebuilt Vitaly Kuznetsov
2021-11-09 16:28 ` [PATCH v4 8/8] KVM: nVMX: Implement Enlightened MSR Bitmap feature Vitaly Kuznetsov
2021-11-09 17:33 ` [PATCH v4 0/8] KVM: nVMX: Enlightened MSR Bitmap feature for Hyper-V on KVM (+ KVM: x86: MSR filtering and related fixes) Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211109162835.99475-5-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®