From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <wangjie125@huawei.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lipeng321@huawei.com>, <huangguangbin2@huawei.com>,
<chenhao288@hisilicon.com>
Subject: [PATCH net 8/8] net: hns3: allow configure ETS bandwidth of all TCs
Date: Wed, 10 Nov 2021 21:42:56 +0800 [thread overview]
Message-ID: <20211110134256.25025-9-huangguangbin2@huawei.com> (raw)
In-Reply-To: <20211110134256.25025-1-huangguangbin2@huawei.com>
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 9 +--------
2 files changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index 90013c131e94..375ebf105a9a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -129,7 +129,7 @@ static int hclge_ets_sch_mode_validate(struct hclge_dev *hdev,
u32 total_ets_bw = 0;
u8 i;
- for (i = 0; i < hdev->tc_max; i++) {
+ for (i = 0; i < HNAE3_MAX_TC; i++) {
switch (ets->tc_tsa[i]) {
case IEEE_8021QAZ_TSA_STRICT:
if (hdev->tm_info.tc_info[i].tc_sch_mode !=
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index a50e2edbf4a0..429652a8cde1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1123,7 +1123,6 @@ static int hclge_tm_pri_tc_base_dwrr_cfg(struct hclge_dev *hdev)
static int hclge_tm_ets_tc_dwrr_cfg(struct hclge_dev *hdev)
{
-#define DEFAULT_TC_WEIGHT 1
#define DEFAULT_TC_OFFSET 14
struct hclge_ets_tc_weight_cmd *ets_weight;
@@ -1136,13 +1135,7 @@ static int hclge_tm_ets_tc_dwrr_cfg(struct hclge_dev *hdev)
for (i = 0; i < HNAE3_MAX_TC; i++) {
struct hclge_pg_info *pg_info;
- ets_weight->tc_weight[i] = DEFAULT_TC_WEIGHT;
-
- if (!(hdev->hw_tc_map & BIT(i)))
- continue;
-
- pg_info =
- &hdev->tm_info.pg_info[hdev->tm_info.tc_info[i].pgid];
+ pg_info = &hdev->tm_info.pg_info[hdev->tm_info.tc_info[i].pgid];
ets_weight->tc_weight[i] = pg_info->tc_dwrr[i];
}
--
2.33.0
next prev parent reply other threads:[~2021-11-10 13:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 13:42 [PATCH net 0/8] net: hns3: add some fixes for -net Guangbin Huang
2021-11-10 13:42 ` [PATCH net 1/8] net: hns3: fix failed to add reuse multicast mac addr to hardware when mc mac table is full Guangbin Huang
2021-11-10 13:42 ` [PATCH net 2/8] net: hns3: fix ROCE base interrupt vector initialization bug Guangbin Huang
2021-11-10 13:42 ` [PATCH net 3/8] net: hns3: fix pfc packet number incorrect after querying pfc parameters Guangbin Huang
2021-11-10 13:42 ` [PATCH net 4/8] net: hns3: sync rx ring head in echo common pull Guangbin Huang
2021-11-10 13:42 ` [PATCH net 5/8] net: hns3: fix kernel crash when unload VF while it is being reset Guangbin Huang
2021-11-10 13:42 ` [PATCH net 6/8] net: hns3: fix some mac statistics is always 0 in device version V2 Guangbin Huang
2021-11-10 13:42 ` [PATCH net 7/8] net: hns3: remove check VF uc mac exist when set by PF Guangbin Huang
2021-11-10 13:42 ` Guangbin Huang [this message]
2021-11-10 14:30 ` [PATCH net 0/8] net: hns3: add some fixes for -net patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110134256.25025-9-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=chenhao288@hisilicon.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=wangjie125@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®