From: Fabien Parent <fparent@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Fabien Parent <fparent@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/4] arm64: dts: mediatek: mt8192: fix i2c node names
Date: Wed, 10 Nov 2021 20:49:59 +0100 [thread overview]
Message-ID: <20211110194959.20611-4-fparent@baylibre.com> (raw)
In-Reply-To: <20211110194959.20611-1-fparent@baylibre.com>
Fix the i2c node names to be compliant to the YAML schema. The
I2C node name should match the following pattern: "^i2c@[0-9a-f]+$".
Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
v3: rebased
v2: new patch
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index c7c7d4e017ae..53d790c335f9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -479,7 +479,7 @@ audsys: clock-controller@11210000 {
#clock-cells = <1>;
};
- i2c3: i2c3@11cb0000 {
+ i2c3: i2c@11cb0000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11cb0000 0 0x1000>,
<0 0x10217300 0 0x80>;
@@ -498,7 +498,7 @@ imp_iic_wrap_e: clock-controller@11cb1000 {
#clock-cells = <1>;
};
- i2c7: i2c7@11d00000 {
+ i2c7: i2c@11d00000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d00000 0 0x1000>,
<0 0x10217600 0 0x180>;
@@ -511,7 +511,7 @@ i2c7: i2c7@11d00000 {
status = "disabled";
};
- i2c8: i2c8@11d01000 {
+ i2c8: i2c@11d01000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d01000 0 0x1000>,
<0 0x10217780 0 0x180>;
@@ -524,7 +524,7 @@ i2c8: i2c8@11d01000 {
status = "disabled";
};
- i2c9: i2c9@11d02000 {
+ i2c9: i2c@11d02000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d02000 0 0x1000>,
<0 0x10217900 0 0x180>;
@@ -543,7 +543,7 @@ imp_iic_wrap_s: clock-controller@11d03000 {
#clock-cells = <1>;
};
- i2c1: i2c1@11d20000 {
+ i2c1: i2c@11d20000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d20000 0 0x1000>,
<0 0x10217100 0 0x80>;
@@ -556,7 +556,7 @@ i2c1: i2c1@11d20000 {
status = "disabled";
};
- i2c2: i2c2@11d21000 {
+ i2c2: i2c@11d21000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d21000 0 0x1000>,
<0 0x10217180 0 0x180>;
@@ -569,7 +569,7 @@ i2c2: i2c2@11d21000 {
status = "disabled";
};
- i2c4: i2c4@11d22000 {
+ i2c4: i2c@11d22000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11d22000 0 0x1000>,
<0 0x10217380 0 0x180>;
@@ -588,7 +588,7 @@ imp_iic_wrap_ws: clock-controller@11d23000 {
#clock-cells = <1>;
};
- i2c5: i2c5@11e00000 {
+ i2c5: i2c@11e00000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11e00000 0 0x1000>,
<0 0x10217500 0 0x80>;
@@ -607,7 +607,7 @@ imp_iic_wrap_w: clock-controller@11e01000 {
#clock-cells = <1>;
};
- i2c0: i2c0@11f00000 {
+ i2c0: i2c@11f00000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11f00000 0 0x1000>,
<0 0x10217080 0 0x80>;
@@ -620,7 +620,7 @@ i2c0: i2c0@11f00000 {
status = "disabled";
};
- i2c6: i2c6@11f01000 {
+ i2c6: i2c@11f01000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11f01000 0 0x1000>,
<0 0x10217580 0 0x80>;
--
2.33.1
next prev parent reply other threads:[~2021-11-10 19:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 19:49 [PATCH v3 1/4] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format Fabien Parent
2021-11-10 19:49 ` [PATCH v3 2/4] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
2021-11-10 19:49 ` [PATCH v3 3/4] i2c: i2c-mt65xx: add MT8365 SoC support Fabien Parent
2021-11-10 19:49 ` Fabien Parent [this message]
2021-11-17 17:09 ` [PATCH v3 4/4] arm64: dts: mediatek: mt8192: fix i2c node names Matthias Brugger
2021-11-11 14:57 ` [PATCH v3 1/4] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110194959.20611-4-fparent@baylibre.com \
--to=fparent@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome