mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Colin Foster <colin.foster@in-advantage.com>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [RFC PATCH v4 net-next 02/23] net: mdio: mscc-miim: convert to a regmap implementation
Date: Mon, 15 Nov 2021 22:23:07 -0800	[thread overview]
Message-ID: <20211116062328.1949151-3-colin.foster@in-advantage.com> (raw)
In-Reply-To: <20211116062328.1949151-1-colin.foster@in-advantage.com>

Utilize regmap instead of __iomem to perform indirect mdio access. This
will allow for custom regmaps to be used by way of the mscc_miim_setup
function.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/mdio/mdio-mscc-miim.c | 148 +++++++++++++++++++++---------
 1 file changed, 105 insertions(+), 43 deletions(-)

diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c
index 17f98f609ec8..ea599b980bbf 100644
--- a/drivers/net/mdio/mdio-mscc-miim.c
+++ b/drivers/net/mdio/mdio-mscc-miim.c
@@ -14,6 +14,7 @@
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 
 #define MSCC_MIIM_REG_STATUS		0x0
 #define		MSCC_MIIM_STATUS_STAT_PENDING	BIT(2)
@@ -35,37 +36,47 @@
 #define MSCC_PHY_REG_PHY_STATUS	0x4
 
 struct mscc_miim_dev {
-	void __iomem *regs;
-	void __iomem *phy_regs;
+	struct regmap *regs;
+	struct regmap *phy_regs;
 };
 
 /* When high resolution timers aren't built-in: we can't use usleep_range() as
  * we would sleep way too long. Use udelay() instead.
  */
-#define mscc_readl_poll_timeout(addr, val, cond, delay_us, timeout_us)	\
-({									\
-	if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS))			\
-		readl_poll_timeout_atomic(addr, val, cond, delay_us,	\
-					  timeout_us);			\
-	readl_poll_timeout(addr, val, cond, delay_us, timeout_us);	\
+#define mscc_readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us)\
+({									  \
+	if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS))			  \
+		readx_poll_timeout_atomic(op, addr, val, cond, delay_us,  \
+					  timeout_us);			  \
+	readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us);	  \
 })
 
-static int mscc_miim_wait_ready(struct mii_bus *bus)
+static int mscc_miim_status(struct mii_bus *bus)
 {
 	struct mscc_miim_dev *miim = bus->priv;
+	int val, err;
+
+	err = regmap_read(miim->regs, MSCC_MIIM_REG_STATUS, &val);
+	if (err < 0)
+		WARN_ONCE(1, "mscc miim status read error %d\n", err);
+
+	return val;
+}
+
+static int mscc_miim_wait_ready(struct mii_bus *bus)
+{
 	u32 val;
 
-	return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+	return mscc_readx_poll_timeout(mscc_miim_status, bus, val,
 				       !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50,
 				       10000);
 }
 
 static int mscc_miim_wait_pending(struct mii_bus *bus)
 {
-	struct mscc_miim_dev *miim = bus->priv;
 	u32 val;
 
-	return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+	return mscc_readx_poll_timeout(mscc_miim_status, bus, val,
 				       !(val & MSCC_MIIM_STATUS_STAT_PENDING),
 				       50, 10000);
 }
@@ -73,22 +84,30 @@ static int mscc_miim_wait_pending(struct mii_bus *bus)
 static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct mscc_miim_dev *miim = bus->priv;
+	int ret, err;
 	u32 val;
-	int ret;
 
 	ret = mscc_miim_wait_pending(bus);
 	if (ret)
 		goto out;
 
-	writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
-	       (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ,
-	       miim->regs + MSCC_MIIM_REG_CMD);
+	err = regmap_write(miim->regs, MSCC_MIIM_REG_CMD, MSCC_MIIM_CMD_VLD |
+			   (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+			   (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
+			   MSCC_MIIM_CMD_OPR_READ);
+
+	if (err < 0)
+		WARN_ONCE(1, "mscc miim write cmd reg error %d\n", err);
 
 	ret = mscc_miim_wait_ready(bus);
 	if (ret)
 		goto out;
 
-	val = readl(miim->regs + MSCC_MIIM_REG_DATA);
+	err = regmap_read(miim->regs, MSCC_MIIM_REG_DATA, &val);
+
+	if (err < 0)
+		WARN_ONCE(1, "mscc miim read data reg error %d\n", err);
+
 	if (val & MSCC_MIIM_DATA_ERROR) {
 		ret = -EIO;
 		goto out;
@@ -103,18 +122,20 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id,
 			   int regnum, u16 value)
 {
 	struct mscc_miim_dev *miim = bus->priv;
-	int ret;
+	int err, ret;
 
 	ret = mscc_miim_wait_pending(bus);
 	if (ret < 0)
 		goto out;
 
-	writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
-	       (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
-	       (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
-	       MSCC_MIIM_CMD_OPR_WRITE,
-	       miim->regs + MSCC_MIIM_REG_CMD);
+	err = regmap_write(miim->regs, MSCC_MIIM_REG_CMD, MSCC_MIIM_CMD_VLD |
+			   (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+			   (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
+			   (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
+			   MSCC_MIIM_CMD_OPR_WRITE);
 
+	if (err < 0)
+		WARN_ONCE(1, "mscc miim write error %d\n", err);
 out:
 	return ret;
 }
@@ -122,24 +143,37 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id,
 static int mscc_miim_reset(struct mii_bus *bus)
 {
 	struct mscc_miim_dev *miim = bus->priv;
+	int err;
 
 	if (miim->phy_regs) {
-		writel(0, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
-		writel(0x1ff, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
+		err = regmap_write(miim->phy_regs, MSCC_PHY_REG_PHY_CFG, 0);
+		if (err < 0)
+			WARN_ONCE(1, "mscc reset set error %d\n", err);
+
+		err = regmap_write(miim->phy_regs, MSCC_PHY_REG_PHY_CFG, 0x1ff);
+		if (err < 0)
+			WARN_ONCE(1, "mscc reset clear error %d\n", err);
+
 		mdelay(500);
 	}
 
 	return 0;
 }
 
-static int mscc_miim_probe(struct platform_device *pdev)
+static const struct regmap_config mscc_miim_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+static int mscc_miim_setup(struct device *dev, struct mii_bus *bus,
+			   struct regmap *mii_regmap, struct regmap *phy_regmap)
 {
-	struct mscc_miim_dev *dev;
-	struct resource *res;
+	struct mscc_miim_dev *miim;
 	struct mii_bus *bus;
 	int ret;
 
-	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev));
+	bus = devm_mdiobus_alloc_size(dev, sizeof(*miim));
 	if (!bus)
 		return -ENOMEM;
 
@@ -147,26 +181,54 @@ static int mscc_miim_probe(struct platform_device *pdev)
 	bus->read = mscc_miim_read;
 	bus->write = mscc_miim_write;
 	bus->reset = mscc_miim_reset;
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
-	bus->parent = &pdev->dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev));
+	bus->parent = dev;
+
+	miim = bus->priv;
+
+	miim->regs = mii_regmap;
+	miim->phy_regs = phy_regmap;
+
+	return 0;
+}
+
+static int mscc_miim_probe(struct platform_device *pdev)
+{
+	struct regmap *mii_regmap, *phy_regmap;
+	void __iomem *regs, *phy_regs;
+	struct mscc_miim_dev *dev;
+	struct mii_bus *bus;
+	int ret;
 
-	dev = bus->priv;
-	dev->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-	if (IS_ERR(dev->regs)) {
+	regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(regs)) {
 		dev_err(&pdev->dev, "Unable to map MIIM registers\n");
-		return PTR_ERR(dev->regs);
+		return PTR_ERR(regs);
 	}
 
-	/* This resource is optional */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (res) {
-		dev->phy_regs = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(dev->phy_regs)) {
-			dev_err(&pdev->dev, "Unable to map internal phy registers\n");
-			return PTR_ERR(dev->phy_regs);
-		}
+	mii_regmap = devm_regmap_init_mmio(&pdev->dev, regs,
+					   &mscc_miim_regmap_config);
+
+	if (IS_ERR(mii_regmap)) {
+		dev_err(&pdev->dev, "Unable to create MIIM regmap\n");
+		return PTR_ERR(mii_regmap);
 	}
 
+	phy_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(dev->phy_regs)) {
+		dev_err(&pdev->dev, "Unable to map internal phy registers\n");
+		return PTR_ERR(dev->phy_regs);
+	}
+
+	phy_regmap = devm_regmap_init_mmio(&pdev->dev, phy_regs,
+					   &mscc_miim_regmap_config);
+	if (IS_ERR(phy_regmap)) {
+		dev_err(&pdev->dev, "Unable to create phy register regmap\n");
+		return PTR_ERR(dev->phy_regs);
+	}
+
+	mscc_miim_setup(&pdev->dev, bus, mii_regmap, phy_regmap);
+
 	ret = of_mdiobus_register(bus, pdev->dev.of_node);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
-- 
2.25.1


  parent reply	other threads:[~2021-11-16  6:26 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-16  6:23 [RFC PATCH v4 net-next 00/23] add support for VSC75XX control over SPI Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 01/23] net: dsa: ocelot: remove unnecessary pci_bar variables Colin Foster
2021-11-16 17:37   ` Florian Fainelli
2021-11-16  6:23 ` Colin Foster [this message]
2021-11-16  6:23 ` [RFC PATCH v4 net-next 03/23] net: dsa: ocelot: seville: utilize of_mdiobus_register Colin Foster
2021-11-16 11:21   ` Vladimir Oltean
2021-11-16 23:51   ` Florian Fainelli
2021-11-16  6:23 ` [RFC PATCH v4 net-next 04/23] net: dsa: ocelot: felix: switch to mdio-mscc-miim driver for indirect mdio access Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 05/23] net: dsa: ocelot: felix: Remove requirement for PCS in felix devices Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 06/23] net: dsa: ocelot: felix: add interface for custom regmaps Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 07/23] net: dsa: ocelot: felix: add per-device-per-port quirks Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 08/23] net: mscc: ocelot: split register definitions to a separate file Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 09/23] net: mscc: ocelot: expose ocelot wm functions Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 10/23] pinctrl: ocelot: combine get resource and ioremap into single call Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 11/23] pinctrl: ocelot: update pinctrl to automatic base address Colin Foster
2021-11-16 17:36   ` Alexandre Belloni
2021-11-17 13:47     ` Clément Léger
2021-11-19  2:16       ` Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 12/23] pinctrl: ocelot: convert pinctrl to regmap Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 13/23] pinctrl: ocelot: expose ocelot_pinctrl_core_probe interface Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 14/23] pinctrl: microchip-sgpio: update to support regmap Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 15/23] device property: add helper function fwnode_get_child_node_count Colin Foster
2021-11-16  8:23   ` Heikki Krogerus
2021-11-16  6:23 ` [RFC PATCH v4 net-next 16/23] pinctrl: microchip-sgpio: change device tree matches to use nodes instead of device Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 17/23] pinctrl: microchip-sgpio: expose microchip_sgpio_core_probe interface Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 18/23] net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 19/23] net: dsa: felix: name change for clarity from pcs to mdio_device Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 20/23] net: dsa: seville: " Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 21/23] net: ethernet: enetc: " Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 22/23] net: pcs: lynx: use a common naming scheme for all lynx_pcs variables Colin Foster
2021-11-16  6:23 ` [RFC PATCH v4 net-next 23/23] net: dsa: ocelot: felix: add support for VSC75XX control over SPI Colin Foster
2021-11-16 10:34 ` [RFC PATCH v4 net-next 00/23] " Andy Shevchenko
2021-11-16 15:04   ` Colin Foster
2021-11-16 17:05     ` Andy Shevchenko
2021-11-16 11:10 ` Vladimir Oltean
2021-11-16 15:32   ` Colin Foster
2021-11-16 17:41     ` Vladimir Oltean
2021-11-16 22:56 ` Vladimir Oltean
2021-11-16 23:44   ` Colin Foster
2021-11-16 23:47     ` Vladimir Oltean
2021-11-19  1:58 ` Linus Walleij
2021-11-19  2:14   ` Colin Foster
2021-11-21 23:59     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211116062328.1949151-3-colin.foster@in-advantage.com \
    --to=colin.foster@in-advantage.com \
    --cc=Steen.Hegelund@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=hkallweit1@gmail.com \
    --cc=ioana.ciornei@nxp.com \
    --cc=kuba@kernel.org \
    --cc=lars.povlsen@microchip.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=vivien.didelot@gmail.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®