From: Daniel Baluta <daniel.baluta@oss.nxp.com>
To: broonie@kernel.org, alsa-devel@alsa-project.org
Cc: pierre-louis.bossart@linux.intel.com, lgirdwood@gmail.com,
ranjani.sridharan@linux.intel.com, kai.vehmanen@linux.intel.com,
daniel.baluta@gmail.com, linux-imx@nxp.com,
peter.ujfalusi@linux.intel.com,
guennadi.liakhovetski@linux.intel.com,
linux-kernel@vger.kernel.org,
Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH 3/5] ASoC: SOF: imx8m: Add runtime PM / System PM support
Date: Tue, 16 Nov 2021 17:46:11 +0200 [thread overview]
Message-ID: <20211116154613.57122-4-daniel.baluta@oss.nxp.com> (raw)
In-Reply-To: <20211116154613.57122-1-daniel.baluta@oss.nxp.com>
From: Daniel Baluta <daniel.baluta@nxp.com>
We make use of common imx8m_suspend / imx8m_resume functions
for both system PM and runtime PM.
imx8m_suspend:
- frees the MU channels
- disables the clocks
imx8m_resume
- enables the clocks
- requests the MU channels
On i.MX8MP there is no dedicated functionality to put the DSP in reset.
The only way of doing this is to POWER DOWN the Audiomix domain.
We are able to do this because turning off the clocks and freeing the
channels makes the Audiomix to have no users thus PM kernel core turns
it down.
SOF core will not call system PM suspend handler if the DSP is already
down, but at resume it will call the system PM resume. So, we need to
keep track of the state via snd_sof_dsp_set_power_state
Few insights on how SOF core handles the PM:
- SOF core uses PM runtime autosuspend (with a timeout of 2 secs)
- at probe, SOF core boots the DSP and lets the PM runtime suspend to
turn it off, if there is no activity
- when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core
calls PM runtime resume to turn on the DSP
- when the ALSA sound card is closed SOF core make use of PM subsystem
to call PM runtime suspend and thus turning off the DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/sof/imx/imx8m.c | 106 +++++++++++++++++++++++++++++++++++++-
1 file changed, 105 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c
index ab40c0bdf796..b050d4cf9cd5 100644
--- a/sound/soc/sof/imx/imx8m.c
+++ b/sound/soc/sof/imx/imx8m.c
@@ -195,7 +195,9 @@ static int imx8m_probe(struct snd_sof_dev *sdev)
if (ret < 0)
goto exit_pdev_unregister;
- imx8_enable_clocks(sdev, priv->clks);
+ ret = imx8_enable_clocks(sdev, priv->clks);
+ if (ret < 0)
+ goto exit_pdev_unregister;
return 0;
@@ -252,6 +254,100 @@ static struct snd_soc_dai_driver imx8m_dai[] = {
},
};
+static int imx8m_dsp_set_power_state(struct snd_sof_dev *sdev,
+ const struct sof_dsp_power_state *target_state)
+{
+ sdev->dsp_power_state = *target_state;
+
+ return 0;
+}
+
+static int imx8m_resume(struct snd_sof_dev *sdev)
+{
+ struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
+ int ret;
+ int i;
+
+ ret = imx8_enable_clocks(sdev, priv->clks);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < DSP_MU_CHAN_NUM; i++)
+ imx_dsp_request_channel(priv->dsp_ipc, i);
+
+ return 0;
+}
+
+static void imx8m_suspend(struct snd_sof_dev *sdev)
+{
+ struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
+ int i;
+
+ for (i = 0; i < DSP_MU_CHAN_NUM; i++)
+ imx_dsp_free_channel(priv->dsp_ipc, i);
+
+ imx8_disable_clocks(sdev, priv->clks);
+}
+
+static int imx8m_dsp_runtime_resume(struct snd_sof_dev *sdev)
+{
+ int ret;
+ const struct sof_dsp_power_state target_dsp_state = {
+ .state = SOF_DSP_PM_D0,
+ };
+
+ ret = imx8m_resume(sdev);
+ if (ret < 0)
+ return ret;
+
+ return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
+}
+
+static int imx8m_dsp_runtime_suspend(struct snd_sof_dev *sdev)
+{
+ const struct sof_dsp_power_state target_dsp_state = {
+ .state = SOF_DSP_PM_D3,
+ };
+
+ imx8m_suspend(sdev);
+
+ return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
+}
+
+static int imx8m_dsp_resume(struct snd_sof_dev *sdev)
+{
+ int ret;
+ const struct sof_dsp_power_state target_dsp_state = {
+ .state = SOF_DSP_PM_D0,
+ };
+
+ ret = imx8m_resume(sdev);
+ if (ret < 0)
+ return ret;
+
+ if (pm_runtime_suspended(sdev->dev)) {
+ pm_runtime_disable(sdev->dev);
+ pm_runtime_set_active(sdev->dev);
+ pm_runtime_mark_last_busy(sdev->dev);
+ pm_runtime_enable(sdev->dev);
+ pm_runtime_idle(sdev->dev);
+ }
+
+ return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
+}
+
+static int imx8m_dsp_suspend(struct snd_sof_dev *sdev, unsigned int target_state)
+{
+ const struct sof_dsp_power_state target_dsp_state = {
+ .state = target_state,
+ };
+
+ if (!pm_runtime_suspended(sdev->dev))
+ imx8m_suspend(sdev);
+
+ return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
+}
+
/* i.MX8 ops */
struct snd_sof_dsp_ops sof_imx8m_ops = {
/* probe and remove */
@@ -297,6 +393,14 @@ struct snd_sof_dsp_ops sof_imx8m_ops = {
.drv = imx8m_dai,
.num_drv = ARRAY_SIZE(imx8m_dai),
+ .suspend = imx8m_dsp_suspend,
+ .resume = imx8m_dsp_resume,
+
+ .runtime_suspend = imx8m_dsp_runtime_suspend,
+ .runtime_resume = imx8m_dsp_runtime_resume,
+
+ .set_power_state = imx8m_dsp_set_power_state,
+
.hw_info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
--
2.27.0
next prev parent reply other threads:[~2021-11-16 15:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 15:46 [PATCH 0/5] ASoC: SOF: Add PM support for i.MX8/i.MX8X/i.MX8M Daniel Baluta
2021-11-16 15:46 ` [PATCH 1/5] ASoC: SOF: imx: Add code to manage DSP related clocks Daniel Baluta
2021-11-17 12:58 ` Mark Brown
2021-11-16 15:46 ` [PATCH 2/5] ASoC: SOF: imx8: Add runtime PM / System PM support Daniel Baluta
2021-11-16 15:46 ` Daniel Baluta [this message]
2021-11-16 15:46 ` [PATCH 4/5] ASoC: SOF: imx8m: Implement DSP start Daniel Baluta
2021-11-16 15:46 ` [PATCH 5/5] ASoC: SOF: imx8m: Implement reset callback Daniel Baluta
2021-11-23 0:00 ` [PATCH 0/5] ASoC: SOF: Add PM support for i.MX8/i.MX8X/i.MX8M Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211116154613.57122-4-daniel.baluta@oss.nxp.com \
--to=daniel.baluta@oss.nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=daniel.baluta@gmail.com \
--cc=daniel.baluta@nxp.com \
--cc=guennadi.liakhovetski@linux.intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®