From: Zameer Manji <zmanji@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Zameer Manji <zmanji@gmail.com>,
Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Michael Straube <straube.linux@gmail.com>,
"Fabio M. De Francesco" <fmdefrancesco@gmail.com>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: r8188eu: remove unused code in rtw_cmd.h
Date: Wed, 17 Nov 2021 14:38:14 +0000 [thread overview]
Message-ID: <20211117143831.1511437-1-zmanji@gmail.com> (raw)
This patch removes unused code in rtw_cmd.h.
Signed-off-by: Zameer Manji <zmanji@gmail.com>
---
drivers/staging/r8188eu/include/rtw_cmd.h | 196 ----------------------
1 file changed, 196 deletions(-)
diff --git a/drivers/staging/r8188eu/include/rtw_cmd.h b/drivers/staging/r8188eu/include/rtw_cmd.h
index 47c3c80cc24a..14e8a4c03449 100644
--- a/drivers/staging/r8188eu/include/rtw_cmd.h
+++ b/drivers/staging/r8188eu/include/rtw_cmd.h
@@ -8,13 +8,9 @@
#include "rtw_rf.h"
#include "rtw_led.h"
-#define C2H_MEM_SZ (16*1024)
-
#include "osdep_service.h"
#include "ieee80211.h" /* <ieee80211/ieee80211.h> */
-#define FREE_CMDOBJ_SZ 128
-
#define MAX_CMDSZ 1024
#define MAX_RSPSZ 512
#define MAX_EVTSZ 1024
@@ -425,37 +421,6 @@ struct getphy_rsp {
u8 modem;
};
-struct readBB_parm {
- u8 offset;
-};
-struct readBB_rsp {
- u8 value;
-};
-
-struct readTSSI_parm {
- u8 offset;
-};
-struct readTSSI_rsp {
- u8 value;
-};
-
-struct writeBB_parm {
- u8 offset;
- u8 value;
-};
-
-struct readRF_parm {
- u8 offset;
-};
-struct readRF_rsp {
- u32 value;
-};
-
-struct writeRF_parm {
- u32 offset;
- u32 value;
-};
-
struct getrfintfs_parm {
u8 rfintfs;
};
@@ -523,167 +488,6 @@ struct drvextra_cmd_parm {
unsigned char *pbuf;
};
-/*------------------- Below are used for RF/BB tunning ---------------------*/
-
-struct setantenna_parm {
- u8 tx_antset;
- u8 rx_antset;
- u8 tx_antenna;
- u8 rx_antenna;
-};
-
-struct enrateadaptive_parm {
- u32 en;
-};
-
-struct settxagctbl_parm {
- u32 txagc[MAX_RATES_LENGTH];
-};
-
-struct gettxagctbl_parm {
- u32 rsvd;
-};
-struct gettxagctbl_rsp {
- u32 txagc[MAX_RATES_LENGTH];
-};
-
-struct setagcctrl_parm {
- u32 agcctrl; /* 0: pure hw, 1: fw */
-};
-
-struct setssup_parm {
- u32 ss_ForceUp[MAX_RATES_LENGTH];
-};
-
-struct getssup_parm {
- u32 rsvd;
-};
-
-struct getssup_rsp {
- u8 ss_ForceUp[MAX_RATES_LENGTH];
-};
-
-struct setssdlevel_parm {
- u8 ss_DLevel[MAX_RATES_LENGTH];
-};
-
-struct getssdlevel_parm {
- u32 rsvd;
-};
-
-struct getssdlevel_rsp {
- u8 ss_DLevel[MAX_RATES_LENGTH];
-};
-
-struct setssulevel_parm {
- u8 ss_ULevel[MAX_RATES_LENGTH];
-};
-
-struct getssulevel_parm {
- u32 rsvd;
-};
-
-struct getssulevel_rsp {
- u8 ss_ULevel[MAX_RATES_LENGTH];
-};
-
-struct setcountjudge_parm {
- u8 count_judge[MAX_RATES_LENGTH];
-};
-
-struct getcountjudge_parm {
- u32 rsvd;
-};
-
-struct getcountjudge_rsp {
- u8 count_judge[MAX_RATES_LENGTH];
-};
-
-struct setratable_parm {
- u8 ss_ForceUp[NumRates];
- u8 ss_ULevel[NumRates];
- u8 ss_DLevel[NumRates];
- u8 count_judge[NumRates];
-};
-
-struct getratable_parm {
- uint rsvd;
-};
-
-struct getratable_rsp {
- u8 ss_ForceUp[NumRates];
- u8 ss_ULevel[NumRates];
- u8 ss_DLevel[NumRates];
- u8 count_judge[NumRates];
-};
-
-/* to get TX,RX retry count */
-
-struct gettxretrycnt_parm {
- unsigned int rsvd;
-};
-
-struct gettxretrycnt_rsp {
- unsigned long tx_retrycnt;
-};
-
-struct getrxretrycnt_parm {
- unsigned int rsvd;
-};
-
-struct getrxretrycnt_rsp {
- unsigned long rx_retrycnt;
-};
-
-/* to get BCNOK,BCNERR count */
-struct getbcnokcnt_parm {
- unsigned int rsvd;
-};
-
-struct getbcnokcnt_rsp {
- unsigned long bcnokcnt;
-};
-
-struct getbcnerrcnt_parm {
- unsigned int rsvd;
-};
-
-struct getbcnerrcnt_rsp {
- unsigned long bcnerrcnt;
-};
-
-/* to get current TX power level */
-struct getcurtxpwrlevel_parm {
- unsigned int rsvd;
-};
-struct getcurtxpwrlevel_rspi {
- unsigned short tx_power;
-};
-
-struct setprobereqextraie_parm {
- unsigned char e_id;
- unsigned char ie_len;
- unsigned char ie[0];
-};
-
-struct setassocreqextraie_parm {
- unsigned char e_id;
- unsigned char ie_len;
- unsigned char ie[0];
-};
-
-struct setproberspextraie_parm {
- unsigned char e_id;
- unsigned char ie_len;
- unsigned char ie[0];
-};
-
-struct setassocrspextraie_parm {
- unsigned char e_id;
- unsigned char ie_len;
- unsigned char ie[0];
-};
-
struct addBaReq_parm {
unsigned int tid;
u8 addr[ETH_ALEN];
--
2.25.1
next reply other threads:[~2021-11-17 14:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-17 14:38 Zameer Manji [this message]
2021-11-25 16:41 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211117143831.1511437-1-zmanji@gmail.com \
--to=zmanji@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®