[PATCH 1/5] arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI

[Jernej Skrabec <jernej.skrabec@gmail.com>]

There is another very similar device to Tanix TX6, namely Tanix TX6
mini. Because most of the board design is shared, it makes sense to have
common nodes in DTSI file.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 164 +----------------
 .../boot/dts/allwinner/sun50i-h6-tanix.dtsi   | 173 ++++++++++++++++++
 2 files changed, 174 insertions(+), 163 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 7c37aa4c60cb..a6e69f4b2666 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -3,175 +3,13 @@
 
 /dts-v1/;
 
-#include "sun50i-h6.dtsi"
-#include "sun50i-h6-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "sun50i-h6-tanix.dtsi"
 
 / {
 	model = "Tanix TX6";
 	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	/* used for FD650 LED display driver */
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
-		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
-		i2c-gpio,delay-us = <5>;
-	};
-
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-cpu-gpu";
-		regulator-min-microvolt = <1135000>;
-		regulator-max-microvolt = <1135000>;
-	};
-
-	sound-spdif {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "sun50i-h6-spdif";
-
-		simple-audio-card,cpu {
-			sound-dai = <&spdif>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&spdif_out>;
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_vdd_cpu_gpu>;
-};
-
-&de {
-	status = "okay";
-};
-
-&dwc3 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&reg_vdd_cpu_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&mmc2 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	mmc-hs200-1_8v;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&pio {
-	vcc-pc-supply = <&reg_vcc1v8>;
-	vcc-pd-supply = <&reg_vcc3v3>;
-	vcc-pg-supply = <&reg_vcc1v8>;
 };
 
 &r_ir {
 	linux,rc-map-name = "rc-tanix-tx5max";
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ph_pins>;
-	status = "okay";
-};
-
-&usb2otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb2phy {
-	status = "okay";
-};
-
-&usb3phy {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
new file mode 100644
index 000000000000..166b6a7a586c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/* used for FD650 LED display driver */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+		i2c-gpio,delay-us = <5>;
+	};
+
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_vcc1v8>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc1v8>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
-- 
2.34.1