From: Li Yang <leoyang.li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Biwen Li <biwen.li@nxp.com>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
Date: Fri, 3 Dec 2021 18:17:12 -0600 [thread overview]
Message-ID: <20211204001718.8511-3-leoyang.li@nxp.com> (raw)
In-Reply-To: <20211204001718.8511-1-leoyang.li@nxp.com>
From: Biwen Li <biwen.li@nxp.com>
Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc
wakeup source for rdb and qds boards instead of the original flextimer1
based ftm_alarm0. The ftm_alarm0 node hence is disabled by default.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++-
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 +++++++++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 6e2a1da662fb..00d5b81bdef3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -25,7 +25,7 @@ aliases {
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
- rtc1 = &ftm_alarm0;
+ rtc1 = &ftm_alarm1;
};
chosen {
@@ -234,6 +234,10 @@ mt35xu02g0: flash@0 {
};
};
+&ftm_alarm1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7719f44bcaed..41900d351a92 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -21,7 +21,7 @@ aliases {
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
- rtc1 = &ftm_alarm0;
+ rtc1 = &ftm_alarm1;
};
chosen {
@@ -132,6 +132,10 @@ mt35xu02g0: flash@0 {
};
};
+&ftm_alarm1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 9efcaf68578c..ef9d17df2afa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1198,6 +1198,15 @@ ftm_alarm0: timer@2800000 {
reg = <0x0 0x2800000 0x0 0x10000>;
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ftm_alarm1: timer@2810000 {
+ compatible = "fsl,ls1028a-ftm-alarm";
+ reg = <0x0 0x2810000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
--
2.25.1
next prev parent reply other threads:[~2021-12-04 0:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-04 0:17 [PATCH v2 0/8] ls1028a device tree update Li Yang
2021-12-04 0:17 ` [PATCH v2 1/8] arm64: dts: ls1028a: Add PCIe EP nodes Li Yang
2021-12-14 5:42 ` Shawn Guo
2021-12-04 0:17 ` Li Yang [this message]
2021-12-14 5:46 ` [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source Shawn Guo
2021-12-14 6:16 ` Leo Li
2021-12-14 6:20 ` Biwen Li
2021-12-04 0:17 ` [PATCH v2 3/8] arm64: dts: ls1028a: add flextimer based pwm nodes Li Yang
2021-12-04 0:17 ` [PATCH v2 4/8] arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic Li Yang
2021-12-04 0:17 ` [PATCH v2 5/8] arm64: dts: ls1028a-rdb: enable pwm0 Li Yang
2021-12-04 0:17 ` [PATCH v2 6/8] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus Li Yang
2021-12-14 5:48 ` Shawn Guo
2021-12-04 0:17 ` [PATCH v2 7/8] arm64: dts: ls1028a-qds: enable lpuart1 Li Yang
2021-12-04 12:01 ` Vladimir Oltean
2021-12-04 0:17 ` [PATCH v2 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols Li Yang
2021-12-14 7:21 ` Shawn Guo
2021-12-14 8:14 ` Leo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211204001718.8511-3-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=biwen.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®