mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@kernel.org>
To: Marco Elver <elver@google.com>
Cc: kasan-dev@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH -rcu 1/2] kcsan: Avoid nested contexts reading inconsistent reorder_access
Date: Mon, 6 Dec 2021 11:54:05 -0800	[thread overview]
Message-ID: <20211206195405.GD641268@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <20211206064151.3337384-1-elver@google.com>

On Mon, Dec 06, 2021 at 07:41:50AM +0100, Marco Elver wrote:
> Nested contexts, such as nested interrupts or scheduler code, share the
> same kcsan_ctx. When such a nested context reads an inconsistent
> reorder_access due to an interrupt during set_reorder_access(), we can
> observe the following warning:
> 
>  | ------------[ cut here ]------------
>  | Cannot find frame for torture_random kernel/torture.c:456 in stack trace
>  | WARNING: CPU: 13 PID: 147 at kernel/kcsan/report.c:343 replace_stack_entry kernel/kcsan/report.c:343
>  | ...
>  | Call Trace:
>  |  <TASK>
>  |  sanitize_stack_entries kernel/kcsan/report.c:351 [inline]
>  |  print_report kernel/kcsan/report.c:409
>  |  kcsan_report_known_origin kernel/kcsan/report.c:693
>  |  kcsan_setup_watchpoint kernel/kcsan/core.c:658
>  |  rcutorture_one_extend kernel/rcu/rcutorture.c:1475
>  |  rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
>  |  ...
>  |  </TASK>
>  | ---[ end trace ee5299cb933115f5 ]---
>  | ==================================================================
>  | BUG: KCSAN: data-race in _raw_spin_lock_irqsave / rcutorture_one_extend
>  |
>  | write (reordered) to 0xffffffff8c93b300 of 8 bytes by task 154 on cpu 12:
>  |  queued_spin_lock                include/asm-generic/qspinlock.h:80 [inline]
>  |  do_raw_spin_lock                include/linux/spinlock.h:185 [inline]
>  |  __raw_spin_lock_irqsave         include/linux/spinlock_api_smp.h:111 [inline]
>  |  _raw_spin_lock_irqsave          kernel/locking/spinlock.c:162
>  |  try_to_wake_up                  kernel/sched/core.c:4003
>  |  sysvec_apic_timer_interrupt     arch/x86/kernel/apic/apic.c:1097
>  |  asm_sysvec_apic_timer_interrupt arch/x86/include/asm/idtentry.h:638
>  |  set_reorder_access              kernel/kcsan/core.c:416 [inline]    <-- inconsistent reorder_access
>  |  kcsan_setup_watchpoint          kernel/kcsan/core.c:693
>  |  rcutorture_one_extend           kernel/rcu/rcutorture.c:1475
>  |  rcutorture_loop_extend          kernel/rcu/rcutorture.c:1558 [inline]
>  |  rcu_torture_one_read            kernel/rcu/rcutorture.c:1600
>  |  rcu_torture_reader              kernel/rcu/rcutorture.c:1692
>  |  kthread                         kernel/kthread.c:327
>  |  ret_from_fork                   arch/x86/entry/entry_64.S:295
>  |
>  | read to 0xffffffff8c93b300 of 8 bytes by task 147 on cpu 13:
>  |  rcutorture_one_extend           kernel/rcu/rcutorture.c:1475
>  |  rcutorture_loop_extend          kernel/rcu/rcutorture.c:1558 [inline]
>  |  ...
> 
> The warning is telling us that there was a data race which KCSAN wants
> to report, but the function where the original access (that is now
> reordered) happened cannot be found in the stack trace, which prevents
> KCSAN from generating the right stack trace. The stack trace of "write
> (reordered)" now only shows where the access was reordered to, but
> should instead show the stack trace of the original write, with a final
> line saying "reordered to".
> 
> At the point where set_reorder_access() is interrupted, it just set
> reorder_access->ptr and size, at which point size is non-zero. This is
> sufficient (if ctx->disable_scoped is zero) for further accesses from
> nested contexts to perform checking of this reorder_access.
> 
> That then happened in _raw_spin_lock_irqsave(), which is called by
> scheduler code. However, since reorder_access->ip is still stale (ptr
> and size belong to a different ip not yet set) this finally leads to
> replace_stack_entry() not finding the frame in reorder_access->ip and
> generating the above warning.
> 
> Fix it by ensuring that a nested context cannot access reorder_access
> while we update it in set_reorder_access(): set ctx->disable_scoped for
> the duration that reorder_access is updated, which effectively locks
> reorder_access and prevents concurrent use by nested contexts. Note,
> set_reorder_access() can do the update only if disabled_scoped is zero
> on entry, and must therefore set disable_scoped back to non-zero after
> the initial check in set_reorder_access().
> 
> Signed-off-by: Marco Elver <elver@google.com>

I pulled both of these in, thank you!

							Thanx, Paul

> ---
>  kernel/kcsan/core.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
> index 916060913966..fe12dfe254ec 100644
> --- a/kernel/kcsan/core.c
> +++ b/kernel/kcsan/core.c
> @@ -412,11 +412,20 @@ set_reorder_access(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size,
>  	if (!reorder_access || !kcsan_weak_memory)
>  		return;
>  
> +	/*
> +	 * To avoid nested interrupts or scheduler (which share kcsan_ctx)
> +	 * reading an inconsistent reorder_access, ensure that the below has
> +	 * exclusive access to reorder_access by disallowing concurrent use.
> +	 */
> +	ctx->disable_scoped++;
> +	barrier();
>  	reorder_access->ptr		= ptr;
>  	reorder_access->size		= size;
>  	reorder_access->type		= type | KCSAN_ACCESS_SCOPED;
>  	reorder_access->ip		= ip;
>  	reorder_access->stack_depth	= get_kcsan_stack_depth();
> +	barrier();
> +	ctx->disable_scoped--;
>  }
>  
>  /*
> -- 
> 2.34.1.400.ga245620fadb-goog
> 

      parent reply	other threads:[~2021-12-06 19:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-06  6:41 Marco Elver
2021-12-06  6:41 ` [PATCH -rcu 2/2] kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it Marco Elver
2021-12-06 19:54 ` Paul E. McKenney [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211206195405.GD641268@paulmck-ThinkPad-P17-Gen-1 \
    --to=paulmck@kernel.org \
    --cc=elver@google.com \
    --cc=kasan-dev@googlegroups.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®