From: David Heidelberg <david@ixit.cz>
To: Rob Herring <robh+dt@kernel.org>, Michal Simek <michal.simek@xilinx.com>
Cc: ~okias/devicetree@lists.sr.ht, David Heidelberg <david@ixit.cz>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm64: xilinx: dts: drop legacy property #stream-id-cells
Date: Wed, 8 Dec 2021 19:48:45 +0100 [thread overview]
Message-ID: <20211208184846.101166-1-david@ixit.cz> (raw)
Property #stream-id-cells is legacy leftover and isn't currently
documented nor used.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2:
- split qcom and xilinx
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 28 --------------------------
1 file changed, 28 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 74e66443e4ce..493719f71fb5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -262,7 +262,6 @@ fpd_dma_chan1: dma@fd500000 {
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14e8>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -275,7 +274,6 @@ fpd_dma_chan2: dma@fd510000 {
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14e9>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -288,7 +286,6 @@ fpd_dma_chan3: dma@fd520000 {
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14ea>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -301,7 +298,6 @@ fpd_dma_chan4: dma@fd530000 {
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14eb>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -314,7 +310,6 @@ fpd_dma_chan5: dma@fd540000 {
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14ec>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -327,7 +322,6 @@ fpd_dma_chan6: dma@fd550000 {
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14ed>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -340,7 +334,6 @@ fpd_dma_chan7: dma@fd560000 {
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14ee>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -353,7 +346,6 @@ fpd_dma_chan8: dma@fd570000 {
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x14ef>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -383,7 +375,6 @@ lpd_dma_chan1: dma@ffa80000 {
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x868>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -396,7 +387,6 @@ lpd_dma_chan2: dma@ffa90000 {
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x869>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -409,7 +399,6 @@ lpd_dma_chan3: dma@ffaa0000 {
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86a>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -422,7 +411,6 @@ lpd_dma_chan4: dma@ffab0000 {
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86b>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -435,7 +423,6 @@ lpd_dma_chan5: dma@ffac0000 {
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86c>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -448,7 +435,6 @@ lpd_dma_chan6: dma@ffad0000 {
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86d>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -461,7 +447,6 @@ lpd_dma_chan7: dma@ffae0000 {
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86e>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -474,7 +459,6 @@ lpd_dma_chan8: dma@ffaf0000 {
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x86f>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -495,7 +479,6 @@ nand0: nand-controller@ff100000 {
interrupts = <0 14 4>;
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x872>;
power-domains = <&zynqmp_firmware PD_NAND>;
};
@@ -509,7 +492,6 @@ gem0: ethernet@ff0b0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
};
@@ -523,7 +505,6 @@ gem1: ethernet@ff0c0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
};
@@ -537,7 +518,6 @@ gem2: ethernet@ff0d0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
};
@@ -551,7 +531,6 @@ gem3: ethernet@ff0e0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
};
@@ -621,7 +600,6 @@ pcie: pcie@fd0e0000 {
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x4d0>;
power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
@@ -642,7 +620,6 @@ qspi: spi@ff0f0000 {
<0x0 0xc0000000 0x0 0x8000000>;
#address-cells = <1>;
#size-cells = <0>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x873>;
power-domains = <&zynqmp_firmware PD_QSPI>;
};
@@ -674,7 +651,6 @@ sata: ahci@fd0c0000 {
interrupts = <0 133 4>;
power-domains = <&zynqmp_firmware PD_SATA>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
- #stream-id-cells = <4>;
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
<&smmu 0x4c2>, <&smmu 0x4c3>;
};
@@ -686,7 +662,6 @@ sdhci0: mmc@ff160000 {
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
- #stream-id-cells = <1>;
iommus = <&smmu 0x870>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd0", "clk_in_sd0";
@@ -700,7 +675,6 @@ sdhci1: mmc@ff170000 {
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
- #stream-id-cells = <1>;
iommus = <&smmu 0x871>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd1", "clk_in_sd1";
@@ -825,7 +799,6 @@ dwc3_0: usb@fe200000 {
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 65 4>, <0 69 4>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
/* dma-coherent; */
@@ -852,7 +825,6 @@ dwc3_1: usb@fe300000 {
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 70 4>, <0 74 4>;
- #stream-id-cells = <1>;
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
/* dma-coherent; */
--
2.33.0
next reply other threads:[~2021-12-08 18:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 18:48 David Heidelberg [this message]
2021-12-14 10:35 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208184846.101166-1-david@ixit.cz \
--to=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=~okias/devicetree@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®