From: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
To: <broonie@kernel.org>, <alsa-devel@alsa-project.org>
Cc: <Vijendar.Mukunda@amd.com>, <Alexander.Deucher@amd.com>,
<Basavaraj.Hiregoudar@amd.com>, <Sunil-kumar.Dommati@amd.com>,
"Ajit Kumar Pandey" <AjitKumar.Pandey@amd.com>,
Oder Chiou <oder_chiou@realtek.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/1] ASoC: rt5682s: Add dapm switch to mute/unmute HP playback output
Date: Thu, 9 Dec 2021 00:25:17 +0530 [thread overview]
Message-ID: <20211208185517.1555884-2-AjitKumar.Pandey@amd.com> (raw)
In-Reply-To: <20211208185517.1555884-1-AjitKumar.Pandey@amd.com>
Add dapm switch in playback path to mute or unmute HP output data.
We will set and reset MUTE_SFT bit in RT5682S_HP_CTRL_1 register
based on switch value to mute or unmute respective channel.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
---
sound/soc/codecs/rt5682s.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c
index d49a4f68566d..21ab5f7df422 100644
--- a/sound/soc/codecs/rt5682s.c
+++ b/sound/soc/codecs/rt5682s.c
@@ -1573,6 +1573,14 @@ static const char * const rt5682s_adcdat_pin_select[] = {
"ADCDAT1", "ADCDAT2",
};
+/* Out Switch */
+static const struct snd_kcontrol_new hpol_switch =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1,
+ RT5682S_L_MUTE_SFT, 1, 1);
+static const struct snd_kcontrol_new hpor_switch =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1,
+ RT5682S_R_MUTE_SFT, 1, 1);
+
static SOC_VALUE_ENUM_SINGLE_DECL(rt5682s_adcdat_pin_enum,
RT5682S_GPIO_CTRL_1, RT5682S_GP4_PIN_SFT, RT5682S_GP4_PIN_MASK,
rt5682s_adcdat_pin_select, rt5682s_adcdat_pin_values);
@@ -1746,6 +1754,11 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = {
SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5682s_hp_amp_event,
SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_SWITCH("HPOL Playback", SND_SOC_NOPM, 0, 0,
+ &hpol_switch),
+ SND_SOC_DAPM_SWITCH("HPOR Playback", SND_SOC_NOPM, 0, 0,
+ &hpor_switch),
+
/* CLK DET */
SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682S_CLK_DET,
RT5682S_SYS_CLK_DET_SFT, 0, NULL, 0),
@@ -1895,8 +1908,10 @@ static const struct snd_soc_dapm_route rt5682s_dapm_routes[] = {
{"HP Amp", NULL, "CLKDET SYS"},
{"HP Amp", NULL, "SAR"},
- {"HPOL", NULL, "HP Amp"},
- {"HPOR", NULL, "HP Amp"},
+ {"HPOL Playback", "Switch", "HP Amp"},
+ {"HPOR Playback", "Switch", "HP Amp"},
+ {"HPOL", NULL, "HPOL Playback"},
+ {"HPOR", NULL, "HPOR Playback"},
};
static int rt5682s_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
--
2.25.1
next parent reply other threads:[~2021-12-08 18:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211208185517.1555884-1-AjitKumar.Pandey@amd.com>
2021-12-08 18:55 ` Ajit Kumar Pandey [this message]
2021-12-09 2:25 ` Shuming [范書銘]
2021-12-16 11:43 ` Ajit Kumar Pandey
2021-12-17 2:25 ` Derek [方德義]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208185517.1555884-2-AjitKumar.Pandey@amd.com \
--to=ajitkumar.pandey@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=Basavaraj.Hiregoudar@amd.com \
--cc=Sunil-kumar.Dommati@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®