From: Erik Ekman <erik@kryo.se>
To: Rasesh Mody <rmody@marvell.com>,
Sudarsana Kalluru <skalluru@marvell.com>,
GR-Linux-NIC-Dev@marvell.com,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Erik Ekman <erik@kryo.se>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] net: bna: Update supported link modes
Date: Thu, 9 Dec 2021 00:00:22 +0100 [thread overview]
Message-ID: <20211208230022.153496-1-erik@kryo.se> (raw)
The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.
The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Only compile tested.
Signed-off-by: Erik Ekman <erik@kryo.se>
---
.../net/ethernet/brocade/bna/bnad_ethtool.c | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index 391b85f25141..d5bf1d4c8dae 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -235,13 +235,18 @@ static int
bnad_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
- u32 supported, advertising;
-
- supported = SUPPORTED_10000baseT_Full;
- advertising = ADVERTISED_10000baseT_Full;
+ ethtool_link_ksettings_zero_link_mode(cmd, supported);
+ ethtool_link_ksettings_zero_link_mode(cmd, advertising);
+
+ ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseCR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseSR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseLR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseCR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseSR_Full);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseLR_Full);
cmd->base.autoneg = AUTONEG_DISABLE;
- supported |= SUPPORTED_FIBRE;
- advertising |= ADVERTISED_FIBRE;
+ ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
cmd->base.port = PORT_FIBRE;
cmd->base.phy_address = 0;
@@ -253,11 +258,6 @@ bnad_get_link_ksettings(struct net_device *netdev,
cmd->base.duplex = DUPLEX_UNKNOWN;
}
- ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
- supported);
- ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
- advertising);
-
return 0;
}
--
2.33.1
next reply other threads:[~2021-12-08 23:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 23:00 Erik Ekman [this message]
2021-12-11 4:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208230022.153496-1-erik@kryo.se \
--to=erik@kryo.se \
--cc=GR-Linux-NIC-Dev@marvell.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmody@marvell.com \
--cc=skalluru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®