From: Flora Fu <flora.fu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Sumit Semwal <sumit.semwal@linaro.org>,
Yong Wu <yong.wu@mediatek.com>,
Pi-Cheng Chen <pi-cheng.chen@mediatek.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<linaro-mm-sig@lists.linaro.org>,
Flora Fu <flora.fu@mediatek.com>, JB Tsai <jb.tsai@mediatek.com>
Subject: [PATCH 03/17] dt-bindings: remoteproc: mediatek: Add APU rproc compatible
Date: Sat, 11 Dec 2021 01:25:51 +0800 [thread overview]
Message-ID: <20211210172605.30618-4-flora.fu@mediatek.com> (raw)
In-Reply-To: <20211210172605.30618-1-flora.fu@mediatek.com>
Add new binding document for the APU remote processor.
The initial version is used for MT8192 SOC.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@mediatek.com>
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
.../bindings/remoteproc/mediatek,apu-rv.yaml | 106 ++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/mediatek,apu-rv.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/mediatek,apu-rv.yaml b/Documentation/devicetree/bindings/remoteproc/mediatek,apu-rv.yaml
new file mode 100644
index 000000000000..c390b85040eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/mediatek,apu-rv.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 (C) MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/mediatek,apu-rv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek APU remote processor controller bindings
+
+description: |
+ APU integrated subsystem having MD32RV33 (MD32) that runs tinysys.
+ The tinysys runs on a microprocessor in APU.
+ Its firmware is loaded and booted from Kernel side.
+ Kernel and tinysys uses IPI to send and receive messages.
+
+maintainers:
+ - Flora Fu <flora.fu@mediatek.com>
+ - Pi-Cheng Chen <pi-cheng.chen@mediatek.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt8192-apusys-rv
+ - const: simple-mfd
+
+ reg:
+ minItems: 1
+
+ reg-names:
+ minItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ interrupts:
+ description: List of interrupts.
+
+ interrupt-names:
+ description: Name list of interrupts.
+
+ mboxes:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - interrupts
+ - mboxes
+
+additionalProperties:
+ type: object
+ description:
+ Represent subnodes that will register as rpmsg devices.
+ properties:
+ compatible:
+ enum:
+ - mediatek,apu-ctrl-rpmsg
+ - mediatek,apupwr-tx-rpmsg
+ - mediatek,apupwr-rx-rpmsg
+ - mediatek,apu-mdw-rpmsg
+ mediatek,rpmsg-name:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Contains the name for the rpmsg device. Used to match
+ the subnode to rpmsg device announced by APU.
+ required:
+ - compatible
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8192-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/memory/mt8192-larb-port.h>
+
+ apusys_rv@19001000 {
+ compatible = "mediatek,mt8192-apusys-rv", "simple-mfd";
+ reg = <0x19001000 0x1000>;
+ reg-names = "md32_sysctrl";
+ power-domains = <&apuspm 0>;
+ iommus = <&iommu_apu IOMMU_PORT_APU_DATA>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "apu_wdt";
+ mboxes = <&apu_mailbox 0>;
+ apu_ctrl {
+ compatible = "mediatek,apu-ctrl-rpmsg";
+ mediatek,rpmsg-name = "apu-ctrl-rpmsg";
+ };
+ apu_pwr_tx {
+ compatible = "mediatek,apupwr-tx-rpmsg";
+ mediatek,rpmsg-name = "apupwr-tx-rpmsg";
+ };
+ apu_pwr_rx {
+ compatible = "mediatek,apupwr-rx-rpmsg";
+ mediatek,rpmsg-name = "apupwr-rx-rpmsg";
+ };
+ apu_mdw_rpmsg {
+ compatible = "mediatek,apu-mdw-rpmsg";
+ mediatek,rpmsg-name = "apu-mdw-rpmsg";
+ };
+ };
--
2.18.0
next prev parent reply other threads:[~2021-12-10 17:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-10 17:25 [PATCH 00/17] MediaTek MT8192 APU Flora Fu
2021-12-10 17:25 ` [PATCH 01/17] dt-bindings: mailbox: mediatek: Add APU mailbox compatible Flora Fu
2021-12-10 17:25 ` [PATCH 02/17] dt-bindings: memory: mediatek: Add MT8192 apu iommu bindings Flora Fu
2021-12-10 17:25 ` Flora Fu [this message]
2021-12-10 17:25 ` [PATCH 04/17] dt-bindings: soc: mediatek: apu: Add APU power compatible Flora Fu
2021-12-10 17:25 ` [PATCH 05/17] dt-bindings: soc: mediatek: apu: Add apu logger compatible Flora Fu
2021-12-10 17:25 ` [PATCH 06/17] mailbox: mediatek: add mtk-apu-mailbox driver Flora Fu
2021-12-10 17:25 ` [PATCH 07/17] iommu/mediatek: Support APU iommu and config data for mt8192 Flora Fu
2021-12-10 17:25 ` [PATCH 08/17] remoteproc: mediatek: Add APU remoteproc driver Flora Fu
2021-12-10 17:25 ` [PATCH 09/17] soc: mediatek: apu: Add Apu power driver Flora Fu
2021-12-10 17:25 ` [PATCH 10/17] soc: mediatek: apu: Add APU software logger dirver Flora Fu
2021-12-10 17:25 ` [PATCH 11/17] soc: mediatek: apu: Add middleware driver Flora Fu
2021-12-10 17:26 ` [PATCH 12/17] arm64: dts: mt8192: Add APU mtk-apu-mailbox node Flora Fu
2021-12-10 17:26 ` [PATCH 13/17] arm64: dts: mt8192: Add APU-IOMMU nodes Flora Fu
2021-12-10 17:26 ` [PATCH 14/17] arm64: dts: mt8192: Add apu tinysys node Flora Fu
2021-12-10 17:26 ` [PATCH 15/17] arm64: dts: mt8192: Add APU power nodes Flora Fu
2021-12-10 17:26 ` [PATCH 16/17] arm64: dts: mt8192: Add apu-sw-logger node Flora Fu
2021-12-10 17:26 ` [PATCH 17/17] arm64: dts: mt8192: Set up regulators for APU subsys Flora Fu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211210172605.30618-4-flora.fu@mediatek.com \
--to=flora.fu@mediatek.com \
--cc=broonie@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jb.tsai@mediatek.com \
--cc=lgirdwood@gmail.com \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=pi-cheng.chen@mediatek.com \
--cc=sumit.semwal@linaro.org \
--cc=yong.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®