[PATCH v5 4/5] clk: x86: Use dynamic con_id string during clk registration

[Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>]

Replace hard coded con_id string with fch_data->name. We have clk
consumers looking up with different clock names, hence use dynamic
con_id string during clk lookup registration. fch_data->name will
be initialized in acpi driver based on fmw property value.

Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
---
 drivers/clk/x86/clk-fch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/x86/clk-fch.c b/drivers/clk/x86/clk-fch.c
index 6a726420bfcb..d41d519b9c2b 100644
--- a/drivers/clk/x86/clk-fch.c
+++ b/drivers/clk/x86/clk-fch.c
@@ -75,7 +75,7 @@ static int fch_clk_probe(struct platform_device *pdev)
 			OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);
 
 		devm_clk_hw_register_clkdev(&pdev->dev, hws[ST_CLK_GATE],
-			"oscout1", NULL);
+					    fch_data->name, NULL);
 	} else {
 		hws[CLK_48M_FIXED] = clk_hw_register_fixed_rate(NULL, "clk48MHz",
 			NULL, 0, 48000000);
@@ -85,7 +85,7 @@ static int fch_clk_probe(struct platform_device *pdev)
 			OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);
 
 		devm_clk_hw_register_clkdev(&pdev->dev, hws[CLK_GATE_FIXED],
-			"oscout1", NULL);
+					    fch_data->name, NULL);
 	}
 
 	pci_dev_put(rdev);
-- 
2.25.1