From: Borislav Petkov <bp@alien8.de>
To: Mike Rapoport <rppt@kernel.org>
Cc: X86 ML <x86@kernel.org>, LKML <linux-kernel@vger.kernel.org>,
Juergen Gross <jgross@suse.com>,
John Dorminy <jdorminy@redhat.com>,
anjaneya.chagam@intel.com, dan.j.williams@intel.com,
Hugh Dickins <hughd@google.com>,
"Patrick J. Volkerding" <volkerdi@gmail.com>
Subject: [PATCH 3/3] x86/boot: Move EFI range reservation after cmdline parsing
Date: Mon, 13 Dec 2021 12:27:57 +0100 [thread overview]
Message-ID: <20211213112757.2612-4-bp@alien8.de> (raw)
In-Reply-To: <20211213112757.2612-1-bp@alien8.de>
From: Mike Rapoport <rppt@kernel.org>
The memory reservation in arch/x86/platform/efi/efi.c depends on at
least two command line parameters. Put it back later in the boot process
and move efi_memblock_x86_reserve_range() out of early_memory_reserve().
An attempt to fix this was done in
8d48bf8206f7 ("x86/boot: Pull up cmdline preparation and early param parsing")
but that caused other troubles so it got reverted.
The bug this is addressing is:
Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve
kernel command line parameter to suppress "soft reservation" behavior.
This is due to the fact that the following call-chain happens at boot:
early_reserve_memory
|-> efi_memblock_x86_reserve_range
|-> efi_fake_memmap_early
which does
if (!efi_soft_reserve_enabled())
return;
and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed
"nosoftreserve".
However, parse_early_param() gets called *after* it, leading to the boot
cmdline not being taken into account.
[ bp: Productize into a proper patch. ]
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/e8dd8993c38702ee6dd73b3c11f158617e665607.camel@intel.com
---
arch/x86/kernel/setup.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 49b596db5631..e04f5e6eb33f 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -713,9 +713,6 @@ static void __init early_reserve_memory(void)
early_reserve_initrd();
- if (efi_enabled(EFI_BOOT))
- efi_memblock_x86_reserve_range();
-
memblock_x86_reserve_range_setup_data();
reserve_ibft_region();
@@ -890,6 +887,9 @@ void __init setup_arch(char **cmdline_p)
parse_early_param();
+ if (efi_enabled(EFI_BOOT))
+ efi_memblock_x86_reserve_range();
+
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Memory used by the kernel cannot be hot-removed because Linux
--
2.29.2
next prev parent reply other threads:[~2021-12-13 11:28 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-20 12:04 [PATCH v2] x86/setup: call early_reserve_memory() earlier Juergen Gross
2021-09-21 0:01 ` Marek Marczykowski-Górecki
2021-09-21 3:59 ` Nathan Chancellor
2021-09-22 17:18 ` [tip: x86/urgent] x86/setup: Call " tip-bot2 for Juergen Gross
2021-11-04 5:38 ` Williams, Dan J
2021-11-04 11:40 ` Borislav Petkov
2021-11-04 17:36 ` Dan Williams
2021-11-15 11:36 ` [tip: x86/urgent] x86/boot: Pull up cmdline preparation and early param parsing tip-bot2 for Borislav Petkov
2021-12-09 14:38 ` John Dorminy
2021-12-09 15:19 ` Borislav Petkov
2021-12-09 15:26 ` Juergen Gross
2021-12-09 15:28 ` Borislav Petkov
2021-12-09 16:29 ` Mike Rapoport
2021-12-09 16:37 ` Borislav Petkov
2021-12-10 11:28 ` Borislav Petkov
2021-12-10 20:11 ` Hugh Dickins
2021-12-11 10:14 ` Borislav Petkov
2021-12-10 20:32 ` Patrick J. Volkerding
2021-12-11 10:29 ` Borislav Petkov
2021-12-11 5:24 ` John Dorminy
2021-12-11 10:30 ` Borislav Petkov
2021-12-13 8:20 ` Mike Rapoport
2021-12-13 9:33 ` Borislav Petkov
2021-12-13 11:27 ` [PATCH 0/3] x86: Fix boot ordering issues yet again Borislav Petkov
2021-12-13 11:27 ` [PATCH 1/3] Revert "x86/boot: Mark prepare_command_line() __init" Borislav Petkov
2021-12-15 13:05 ` [tip: x86/urgent] " tip-bot2 for Borislav Petkov
2021-12-13 11:27 ` [PATCH 2/3] Revert "x86/boot: Pull up cmdline preparation and early param parsing" Borislav Petkov
2021-12-15 13:05 ` [tip: x86/urgent] " tip-bot2 for Borislav Petkov
2021-12-13 11:27 ` Borislav Petkov [this message]
2021-12-15 13:12 ` [tip: x86/urgent] x86/boot: Move EFI range reservation after cmdline parsing tip-bot2 for Mike Rapoport
[not found] ` <CANGBn69pGb-nscv8tXN1UKDEQGEMWRKuPVPLgg+q2m7V_sBvHw@mail.gmail.com>
2021-12-20 18:49 ` [tip: x86/urgent] x86/boot: Pull up cmdline preparation and early param parsing Patrick J. Volkerding
2021-12-20 18:59 ` Borislav Petkov
2021-12-20 19:08 ` Borislav Petkov
2021-12-09 15:49 ` John Dorminy
2021-12-09 16:07 ` Borislav Petkov
2021-12-15 13:05 ` [tip: x86/urgent] x86/boot: Move EFI range reservation after cmdline parsing tip-bot2 for Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211213112757.2612-4-bp@alien8.de \
--to=bp@alien8.de \
--cc=anjaneya.chagam@intel.com \
--cc=dan.j.williams@intel.com \
--cc=hughd@google.com \
--cc=jdorminy@redhat.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rppt@kernel.org \
--cc=volkerdi@gmail.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome