From: <nicolas.ferre@microchip.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
<arm@kernel.org>, <soc@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Linux Kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Hari Prasath <Hari.PrasathGE@microchip.com>
Subject: [GIT PULL] ARM: at91: dt for 5.17
Date: Mon, 13 Dec 2021 17:14:51 +0100 [thread overview]
Message-ID: <20211213161451.90786-1-nicolas.ferre@microchip.com> (raw)
From: Nicolas Ferre <nicolas.ferre@microchip.com>
Arnd, Olof,
Here are the dt changes for 5.17.
The QSPI nodes have their bindings translated to YAML and updated here:
https://lore.kernel.org/lkml/20211209122939.339810-1-tudor.ambarus@microchip.com/
They are not merged yet but I see no major push back as of today.
Moreover, one of the low priority fix below remove one of the error highlighted
during the conversion to YAML.
Thanks, best regards,
Nicolas
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-dt-5.17
for you to fetch changes up to 078c2a0e8e60bb3fe78cf50b5da1620a4e13e0cd:
ARM: dts: at91: sama7g5ek: Add QSPI0 node (2021-12-13 14:48:04 +0100)
----------------------------------------------------------------
AT91 DT #1 for 5.17:
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
----------------------------------------------------------------
Hari Prasath (1):
ARM: dts: at91: update alternate function of signal PD20
Mihai Sain (1):
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
Oleksij Rempel (1):
ARM: dts: at91: add Microchip EVB-KSZ9477 board
Tudor Ambarus (3):
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama7g5ek: Add QSPI0 node
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 5 +-
arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts | 209 +++++++++++++++++++++++++
arch/arm/boot/dts/at91-sama7g5ek.dts | 73 +++++++++
arch/arm/boot/dts/sama5d2.dtsi | 2 +
arch/arm/boot/dts/sama7g5-pinfunc.h | 2 +-
arch/arm/boot/dts/sama7g5.dtsi | 30 ++++
7 files changed, 318 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
--
Nicolas Ferre
reply other threads:[~2021-12-13 16:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211213161451.90786-1-nicolas.ferre@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=Hari.PrasathGE@microchip.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=claudiu.beznea@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®