[PATCH v2] arm64: dts: sc7180: Add board regulators for MIPI camera trogdor boards

[Stephen Boyd <swboyd@chromium.org>]

Some trogdor boards have on-board regulators for the MIPI camera
components. Add nodes describing these regulators so boards with these
supplies can consume them.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---

Changes from v1 (https://lore.kernel.org/r/20211215003639.386460-1-swboyd@chromium.org):
 * Swapped order of regulators

 .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi  |  16 +++
 .../dts/qcom/sc7180-trogdor-homestar.dtsi     |  16 +++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  | 122 ++++++++++++++++++
 3 files changed, 154 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 14ed09f30a73..c81805ef2250 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -142,6 +142,22 @@ skin-temp-thermistor@1 {
 	};
 };
 
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
 &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 4ab890b2a1d4..9110fed291c4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -149,6 +149,22 @@ skin-temp-thermistor@1 {
 	};
 };
 
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
 &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d4f4441179fc..261339094b3c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -144,6 +144,100 @@ pp3300_a: pp3300-a-regulator {
 		vin-supply = <&ppvar_sys>;
 	};
 
+	pp1800_ec:
+	pp1800_sensors:
+	pp1800_ldo: pp1800-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo";
+
+		/* EC turns on with hibernate_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/*
+		 * Actually should be pp1800_h1 but we don't have any need to
+		 * model that so we use the parent of pp1800_h1.
+		 */
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp2800_uf_cam: pp2800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&uf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp2800_vcm_wf_cam:
+	pp2800_wf_cam: pp2800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
 	pp3300_audio:
 	pp3300_codec: pp3300-codec-regulator {
 		compatible = "regulator-fixed";
@@ -1517,4 +1611,32 @@ pinconf-sd-cd {
 			drive-strength = <2>;
 		};
 	};
+
+	uf_cam_en: uf-cam-en {
+		pinmux {
+			pins = "gpio6";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio6";
+			drive-strength = <2>;
+			/* External pull down */
+			bias-disable;
+		};
+	};
+
+	wf_cam_en: wf-cam-en {
+		pinmux {
+			pins = "gpio7";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio7";
+			drive-strength = <2>;
+			/* External pull down */
+			bias-disable;
+		};
+	};
 };

base-commit: 136057256686de39cc3a07c2e39ef6bc43003ff6
-- 
https://chromeos.dev