mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, narmstrong@baylibre.com,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 1/2] drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops
Date: Fri, 31 Dec 2021 00:55:14 +0100	[thread overview]
Message-ID: <20211230235515.1627522-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20211230235515.1627522-1-martin.blumenstingl@googlemail.com>

Use this to simplify the driver shutdown. It will also come handy when
fixing the error handling in meson_drv_bind_master().

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/gpu/drm/meson/meson_drv.c       |  6 ++--
 drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 ++++++++++++++++---------
 drivers/gpu/drm/meson/meson_osd_afbcd.h |  1 +
 3 files changed, 30 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 80f1d439841a..b919271a6e50 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -385,10 +385,8 @@ static void meson_drv_unbind(struct device *dev)
 	free_irq(priv->vsync_irq, drm);
 	drm_dev_put(drm);
 
-	if (priv->afbcd.ops) {
-		priv->afbcd.ops->reset(priv);
-		meson_rdma_free(priv);
-	}
+	if (priv->afbcd.ops)
+		priv->afbcd.ops->exit(priv);
 }
 
 static const struct component_master_ops meson_drv_master_ops = {
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.c b/drivers/gpu/drm/meson/meson_osd_afbcd.c
index ffc6b584dbf8..0cdbe899402f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.c
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.c
@@ -79,11 +79,6 @@ static bool meson_gxm_afbcd_supported_fmt(u64 modifier, uint32_t format)
 	return meson_gxm_afbcd_pixel_fmt(modifier, format) >= 0;
 }
 
-static int meson_gxm_afbcd_init(struct meson_drm *priv)
-{
-	return 0;
-}
-
 static int meson_gxm_afbcd_reset(struct meson_drm *priv)
 {
 	writel_relaxed(VIU_SW_RESET_OSD1_AFBCD,
@@ -93,6 +88,16 @@ static int meson_gxm_afbcd_reset(struct meson_drm *priv)
 	return 0;
 }
 
+static int meson_gxm_afbcd_init(struct meson_drm *priv)
+{
+	return 0;
+}
+
+static void meson_gxm_afbcd_exit(struct meson_drm *priv)
+{
+	meson_gxm_afbcd_reset(priv);
+}
+
 static int meson_gxm_afbcd_enable(struct meson_drm *priv)
 {
 	writel_relaxed(FIELD_PREP(OSD1_AFBCD_ID_FIFO_THRD, 0x40) |
@@ -172,6 +177,7 @@ static int meson_gxm_afbcd_setup(struct meson_drm *priv)
 
 struct meson_afbcd_ops meson_afbcd_gxm_ops = {
 	.init = meson_gxm_afbcd_init,
+	.exit = meson_gxm_afbcd_exit,
 	.reset = meson_gxm_afbcd_reset,
 	.enable = meson_gxm_afbcd_enable,
 	.disable = meson_gxm_afbcd_disable,
@@ -269,6 +275,18 @@ static bool meson_g12a_afbcd_supported_fmt(u64 modifier, uint32_t format)
 	return meson_g12a_afbcd_pixel_fmt(modifier, format) >= 0;
 }
 
+static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+{
+	meson_rdma_reset(priv);
+
+	meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
+			       VIU_SW_RESET_G12A_OSD1_AFBCD,
+			       VIU_SW_RESET);
+	meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
+
+	return 0;
+}
+
 static int meson_g12a_afbcd_init(struct meson_drm *priv)
 {
 	int ret;
@@ -286,16 +304,10 @@ static int meson_g12a_afbcd_init(struct meson_drm *priv)
 	return 0;
 }
 
-static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+static void meson_g12a_afbcd_exit(struct meson_drm *priv)
 {
-	meson_rdma_reset(priv);
-
-	meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
-			       VIU_SW_RESET_G12A_OSD1_AFBCD,
-			       VIU_SW_RESET);
-	meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
-
-	return 0;
+	meson_g12a_afbcd_reset(priv);
+	meson_rdma_free(priv);
 }
 
 static int meson_g12a_afbcd_enable(struct meson_drm *priv)
@@ -380,6 +392,7 @@ static int meson_g12a_afbcd_setup(struct meson_drm *priv)
 
 struct meson_afbcd_ops meson_afbcd_g12a_ops = {
 	.init = meson_g12a_afbcd_init,
+	.exit = meson_g12a_afbcd_exit,
 	.reset = meson_g12a_afbcd_reset,
 	.enable = meson_g12a_afbcd_enable,
 	.disable = meson_g12a_afbcd_disable,
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.h b/drivers/gpu/drm/meson/meson_osd_afbcd.h
index 5e5523304f42..e77ddeb6416f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.h
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.h
@@ -14,6 +14,7 @@
 
 struct meson_afbcd_ops {
 	int (*init)(struct meson_drm *priv);
+	void (*exit)(struct meson_drm *priv);
 	int (*reset)(struct meson_drm *priv);
 	int (*enable)(struct meson_drm *priv);
 	int (*disable)(struct meson_drm *priv);
-- 
2.34.1


  reply	other threads:[~2021-12-30 23:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-30 23:55 [PATCH 0/2] drm/meson: Error handling fix when AFBCD is used Martin Blumenstingl
2021-12-30 23:55 ` Martin Blumenstingl [this message]
2022-01-03 11:24   ` [PATCH 1/2] drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops Neil Armstrong
2021-12-30 23:55 ` [PATCH 2/2] drm/meson: Fix error handling when afbcd.ops->init fails Martin Blumenstingl
2022-01-03 11:22   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211230235515.1627522-2-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®