From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
openbmc@lists.ozlabs.org, "Tomer Maimon" <tmaimon77@gmail.com>,
"Joel Stanley" <joel@jms.id.au>,
linux-kernel@vger.kernel.org,
"Andy Shevchenko" <andy.shevchenko@gmail.com>,
"Avi Fishman" <avifishman70@gmail.com>,
"Tali Perry" <tali.perry1@gmail.com>,
"Patrick Venture" <venture@google.com>,
"Nancy Yuen" <yuenn@google.com>,
"Benjamin Fair" <benjaminfair@google.com>,
"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Subject: [PATCH v4 8/9] ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttons
Date: Sun, 9 Jan 2022 18:29:59 +0100 [thread overview]
Message-ID: <20220109173000.1242703-9-j.neuschaefer@gmx.net> (raw)
In-Reply-To: <20220109173000.1242703-1-j.neuschaefer@gmx.net>
The Supermicro X9SCi-LN4F server mainboard has a two LEDs and a button
under the control of the BMC. This patch makes them accessible under
Linux running on the BMC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
v4:
- no changes
v3:
- Adjust to schema changes
v2:
- https://lore.kernel.org/lkml/20211207210823.1975632-9-j.neuschaefer@gmx.net/
- Adjust to new GPIO controller names
- Explicitly set pinmux to GPIO for GPIO keys and LEDs
v1:
- https://lore.kernel.org/lkml/20210602120329.2444672-9-j.neuschaefer@gmx.net/
---
.../nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 83f27fbf4e939..3ee61251a16d0 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -8,6 +8,9 @@
#include "nuvoton-wpcm450.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "Supermicro X9SCi-LN4F BMC";
compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
@@ -20,6 +23,46 @@ memory@0 {
device_type = "memory";
reg = <0 0x08000000>; /* 128 MiB */
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins>;
+
+ uid {
+ label = "UID button";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ uid {
+ label = "UID";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ heartbeat {
+ label = "heartbeat";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ key_pins: mux-keys {
+ groups = "gspi", "sspi";
+ function = "gpio";
+ };
+
+ led_pins: mux-leds {
+ groups = "hg3", "hg0", "pwm4";
+ function = "gpio";
+ };
};
&serial0 {
--
2.30.2
next prev parent reply other threads:[~2022-01-09 17:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-09 17:29 [PATCH v4 0/9] Nuvoton WPCM450 pinctrl and GPIO driver Jonathan Neuschäfer
2022-01-09 17:29 ` [PATCH v4 1/9] dt-bindings: arm/npcm: Add binding for global control registers (GCR) Jonathan Neuschäfer
2022-01-09 17:29 ` [PATCH v4 2/9] MAINTAINERS: Match all of bindings/arm/npcm/ as part of NPCM architecture Jonathan Neuschäfer
2022-01-09 17:29 ` [PATCH v4 3/9] ARM: dts: wpcm450: Add global control registers (GCR) node Jonathan Neuschäfer
2022-01-09 17:29 ` [PATCH v4 4/9] dt-bindings: pinctrl: Add Nuvoton WPCM450 Jonathan Neuschäfer
2022-01-21 23:08 ` Rob Herring
2022-01-09 17:29 ` [PATCH v4 5/9] pinctrl: nuvoton: Add driver for WPCM450 Jonathan Neuschäfer
2022-01-10 13:54 ` kernel test robot
2022-01-09 17:29 ` [PATCH v4 6/9] ARM: dts: wpcm450: Add pinctrl and GPIO nodes Jonathan Neuschäfer
2022-01-09 17:29 ` [PATCH v4 7/9] ARM: dts: wpcm450: Add pin functions Jonathan Neuschäfer
2022-01-09 17:29 ` Jonathan Neuschäfer [this message]
2022-01-09 17:30 ` [PATCH v4 9/9] ARM: dts: wpcm450: Add pinmux information to UART0 Jonathan Neuschäfer
2022-01-16 0:38 ` [PATCH v4 0/9] Nuvoton WPCM450 pinctrl and GPIO driver Linus Walleij
2022-01-16 11:36 ` Jonathan Neuschäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220109173000.1242703-9-j.neuschaefer@gmx.net \
--to=j.neuschaefer@gmx.net \
--cc=andy.shevchenko@gmail.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome