From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
<davem@davemloft.net>, <kuba@kernel.org>, <ioana.ciornei@nxp.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH] net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
Date: Tue, 18 Jan 2022 13:08:12 +0200 [thread overview]
Message-ID: <20220118110812.1767997-1-claudiu.beznea@microchip.com> (raw)
On a setup with KSZ9131 and MACB drivers it happens on suspend path, from
time to time, that the PHY interrupt arrives after PHY and MACB were
suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this
case the phy_read() at the beginning of kszphy_handle_interrupt() will
fail (as MACB driver is suspended at this time) leading to phy_error()
being called and a stack trace being displayed on console. To solve this
.suspend/.resume functions for all KSZ devices implementing
.handle_interrupt were replaced with kszphy_suspend()/kszphy_resume()
which disable/enable interrupt before/after calling
genphy_suspend()/genphy_resume().
The fix has been adapted for all KSZ devices which implements
.handle_interrupt but it has been tested only on KSZ9131.
Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/net/phy/micrel.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index aec0fcefdccd..e2ac61f44c94 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1547,8 +1547,8 @@ static struct phy_driver ksphy_driver[] = {
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8021,
.phy_id_mask = 0x00ffffff,
@@ -1562,8 +1562,8 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8031,
.phy_id_mask = 0x00ffffff,
@@ -1577,8 +1577,8 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8041,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -1609,8 +1609,8 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.name = "Micrel KSZ8051",
/* PHY_BASIC_FEATURES */
@@ -1623,8 +1623,8 @@ static struct phy_driver ksphy_driver[] = {
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
.match_phy_device = ksz8051_match_phy_device,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8001,
.name = "Micrel KSZ8001 or KS8721",
@@ -1638,8 +1638,8 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8081,
.name = "Micrel KSZ8081 or KSZ8091",
@@ -1669,8 +1669,8 @@ static struct phy_driver ksphy_driver[] = {
.config_init = ksz8061_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
@@ -1685,8 +1685,8 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ .suspend = kszphy_suspend,
+ .resume = kszphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
}, {
@@ -1704,7 +1704,7 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
+ .suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_LAN8814,
@@ -1732,7 +1732,7 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
+ .suspend = kszphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
--
2.32.0
next reply other threads:[~2022-01-18 11:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 11:08 Claudiu Beznea [this message]
2022-01-18 13:36 ` Andrew Lunn
2022-01-19 14:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220118110812.1767997-1-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®