From: Oliver Graute <oliver.graute@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>
Cc: Oliver Graute <oliver.graute@gmail.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5] drm/panel: simple: add SGD GKTW70SDAD1SD
Date: Sun, 23 Jan 2022 16:18:31 +0100 [thread overview]
Message-ID: <20220123151833.19293-1-oliver.graute@gmail.com> (raw)
Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
to panel-simple.
The panel spec from Variscite can be found at:
https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v5:
- rebased
v4:
- added the datasheet labels
- added Reviewed-by
v3:
- added flags
- added delay
v2:
- changed bpc to 6
- set max value of pixelclock
- increased hfront_porch and hback_porch
- dropped connector-type
adding of bus_format = MEDIA_BUS_FMT_RGB666_1X18 results in wrong colors.
omitting bus_format and using some default is better (Tux Pinguin is colored
fine)
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index eb475a3a774b..0fd88c3f752c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3065,6 +3065,36 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct display_timing sgd_gktw70sdad1sd_timing = {
+ .pixelclock = {30000000, 30000000, 40000000},
+ .hactive = { 800, 800, 800},
+ .hfront_porch = {40, 40, 40},
+ .hback_porch = {40, 40, 40},
+ .hsync_len = {48, 48, 48},
+ .vactive = {480, 480, 480},
+ .vfront_porch = {13, 13, 13},
+ .vback_porch = {29, 29, 29},
+ .vsync_len = {3, 3, 3},
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static const struct panel_desc sgd_gktw70sdad1sd = {
+ .timings = &sgd_gktw70sdad1sd_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 153,
+ .height = 86,
+ },
+ .delay = {
+ .prepare = 20 + 20 + 10 + 10, /* T0 + T2 + T3 + T4 */
+ .enable = 50, /* T5 */
+ .disable = 50, /* T5 */
+ .unprepare = 10 + 10 + 20 + 20, /* T4 + T3 + T2 + T0 */
+ },
+};
+
static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -3857,6 +3887,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "satoz,sat050at40h12r2",
.data = &satoz_sat050at40h12r2,
+ }, {
+ .compatible = "sgd,gktw70sdad1sd",
+ .data = &sgd_gktw70sdad1sd,
}, {
.compatible = "sharp,lq035q7db03",
.data = &sharp_lq035q7db03,
--
2.17.1
reply other threads:[~2022-01-23 15:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220123151833.19293-1-oliver.graute@gmail.com \
--to=oliver.graute@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome