From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
johan@kernel.org, Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 01/11] serial: core: clean up EXPORT_SYMBOLs
Date: Mon, 24 Jan 2022 08:14:20 +0100 [thread overview]
Message-ID: <20220124071430.14907-2-jslaby@suse.cz> (raw)
In-Reply-To: <20220124071430.14907-1-jslaby@suse.cz>
Some EXPORT_SYMBOLs are grouped at one location. Some follow functions
they export, but a newline is present before them. Fix all these and
move them where they belong.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/serial/serial_core.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index dc40c4155356..1f6df577c75b 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -105,6 +105,7 @@ void uart_write_wakeup(struct uart_port *port)
BUG_ON(!state);
tty_port_tty_wakeup(&state->port);
}
+EXPORT_SYMBOL(uart_write_wakeup);
static void uart_stop(struct tty_struct *tty)
{
@@ -351,7 +352,6 @@ uart_update_timeout(struct uart_port *port, unsigned int cflag,
*/
port->timeout = (HZ * size) / baud + HZ/50;
}
-
EXPORT_SYMBOL(uart_update_timeout);
/**
@@ -453,7 +453,6 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
WARN_ON(1);
return 0;
}
-
EXPORT_SYMBOL(uart_get_baud_rate);
/**
@@ -478,7 +477,6 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
return quot;
}
-
EXPORT_SYMBOL(uart_get_divisor);
/* Caller holds port mutex */
@@ -2220,6 +2218,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
return 0;
}
+EXPORT_SYMBOL(uart_suspend_port);
int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
{
@@ -2305,6 +2304,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
return 0;
}
+EXPORT_SYMBOL(uart_resume_port);
static inline void
uart_report_port(struct uart_driver *drv, struct uart_port *port)
@@ -2599,6 +2599,7 @@ int uart_register_driver(struct uart_driver *drv)
out:
return retval;
}
+EXPORT_SYMBOL(uart_register_driver);
/**
* uart_unregister_driver - remove a driver from the uart core layer
@@ -2622,6 +2623,7 @@ void uart_unregister_driver(struct uart_driver *drv)
drv->state = NULL;
drv->tty_driver = NULL;
}
+EXPORT_SYMBOL(uart_unregister_driver);
struct tty_driver *uart_console_device(struct console *co, int *index)
{
@@ -2956,6 +2958,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
+EXPORT_SYMBOL(uart_add_one_port);
/**
* uart_remove_one_port - detach a driver defined port structure
@@ -3036,6 +3039,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
+EXPORT_SYMBOL(uart_remove_one_port);
/*
* Are the two ports equivalent?
@@ -3212,14 +3216,6 @@ bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq);
#endif
-EXPORT_SYMBOL(uart_write_wakeup);
-EXPORT_SYMBOL(uart_register_driver);
-EXPORT_SYMBOL(uart_unregister_driver);
-EXPORT_SYMBOL(uart_suspend_port);
-EXPORT_SYMBOL(uart_resume_port);
-EXPORT_SYMBOL(uart_add_one_port);
-EXPORT_SYMBOL(uart_remove_one_port);
-
/**
* uart_get_rs485_mode() - retrieve rs485 properties for given uart
* @port: uart device's target port
--
2.34.1
next prev parent reply other threads:[~2022-01-24 7:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-24 7:14 [PATCH 00/11] TTY patches for 5.18 Jiri Slaby
2022-01-24 7:14 ` Jiri Slaby [this message]
2022-01-24 7:14 ` [PATCH 02/11] serial: atmel_serial: include circ_buf.h Jiri Slaby
2022-01-24 8:46 ` Richard Genoud
2022-01-24 8:49 ` Richard Genoud
2022-01-24 7:14 ` [PATCH 03/11] tty: add kfifo to tty_port Jiri Slaby
2022-01-24 7:14 ` [PATCH 04/11] tty: tty_port_open, document shutdown vs failed activate Jiri Slaby
2022-01-24 7:14 ` [PATCH 05/11] mxser: fix xmit_buf leak in activate when LSR == 0xff Jiri Slaby
2022-01-24 7:14 ` [PATCH 06/11] mxser: use tty_port xmit_buf helpers Jiri Slaby
2022-01-24 7:14 ` [PATCH 07/11] mxser: switch from xmit_buf to kfifo Jiri Slaby
2022-01-24 7:14 ` [PATCH 08/11] serial: fsl_linflexuart: deduplicate character sending Jiri Slaby
2022-01-24 7:14 ` [PATCH 09/11] serial: fsl_linflexuart: don't call uart_write_wakeup() twice Jiri Slaby
2022-01-24 7:14 ` [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char Jiri Slaby
2022-01-24 9:06 ` Richard Genoud
2022-01-24 14:30 ` kernel test robot
2022-01-26 7:26 ` Jiri Slaby
2022-01-26 13:55 ` Greg KH
2022-01-24 16:23 ` kernel test robot
2022-01-26 17:57 ` Maciej W. Rozycki
2022-01-27 8:09 ` Jiri Slaby
2022-01-24 7:14 ` [PATCH 11/11] serial: mcf: use helpers in mcf_tx_chars() Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220124071430.14907-2-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®