From: Iwona Winiarska <iwona.winiarska@intel.com>
To: linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>, Jonathan Corbet <corbet@lwn.net>,
Borislav Petkov <bp@alien8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Tony Luck <tony.luck@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Randy Dunlap <rdunlap@infradead.org>,
Zev Weiss <zweiss@equinix.com>,
David Muller <d.mueller@elsoft.ch>,
Dave Hansen <dave.hansen@intel.com>,
Billy Tsai <billy_tsai@aspeedtech.com>,
Iwona Winiarska <iwona.winiarska@intel.com>,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH v6 03/13] ARM: dts: aspeed: Add PECI controller nodes
Date: Tue, 25 Jan 2022 02:10:54 +0100 [thread overview]
Message-ID: <20220125011104.2480133-4-iwona.winiarska@intel.com> (raw)
In-Reply-To: <20220125011104.2480133-1-iwona.winiarska@intel.com>
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
3 files changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f14dace34c5a..fa8b581c3d6c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -392,6 +392,17 @@ uart_routing: uart-routing@9c {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7495f93c5069..4147b397c883 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -516,6 +516,17 @@ ibt: ibt@140 {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..3d5ce9da42c3 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -512,6 +512,17 @@ wdt4: watchdog@1e7850c0 {
status = "disabled";
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.31.1
next prev parent reply other threads:[~2022-01-25 3:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 1:10 [PATCH v6 00/13] Introduce PECI subsystem Iwona Winiarska
2022-01-25 1:10 ` [PATCH v6 01/13] dt-bindings: Add generic bindings for PECI Iwona Winiarska
2022-01-25 1:10 ` [PATCH v6 02/13] dt-bindings: Add bindings for peci-aspeed Iwona Winiarska
2022-01-25 1:10 ` Iwona Winiarska [this message]
2022-01-25 1:10 ` [PATCH v6 04/13] peci: Add core infrastructure Iwona Winiarska
2022-01-25 1:10 ` [PATCH v6 05/13] peci: Add peci-aspeed controller driver Iwona Winiarska
2022-01-25 13:31 ` kernel test robot
2022-01-25 1:10 ` [PATCH v6 06/13] peci: Add device detection Iwona Winiarska
2022-01-25 1:10 ` [PATCH v6 07/13] peci: Add sysfs interface for PECI bus Iwona Winiarska
2022-01-25 1:10 ` [PATCH v6 08/13] peci: Add support for PECI device drivers Iwona Winiarska
2022-01-25 1:11 ` [PATCH v6 09/13] peci: Add peci-cpu driver Iwona Winiarska
2022-01-25 1:11 ` [PATCH v6 10/13] hwmon: peci: Add cputemp driver Iwona Winiarska
2022-01-25 1:11 ` [PATCH v6 11/13] hwmon: peci: Add dimmtemp driver Iwona Winiarska
2022-01-25 1:11 ` [PATCH v6 12/13] docs: hwmon: Document PECI drivers Iwona Winiarska
2022-01-25 1:11 ` [PATCH v6 13/13] docs: Add PECI documentation Iwona Winiarska
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125011104.2480133-4-iwona.winiarska@intel.com \
--to=iwona.winiarska@intel.com \
--cc=andrew@aj.id.au \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=billy_tsai@aspeedtech.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=d.mueller@elsoft.ch \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jae.hyun.yoo@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=olof@lixom.net \
--cc=openbmc@lists.ozlabs.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=tony.luck@intel.com \
--cc=zweiss@equinix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®