From: Hugo Villeneuve <hugo@hugovil.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: hugo@hugovil.com, Hugo Villeneuve <hvilleneuve@dimonoff.com>,
linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/10] rtc: pcf2127: adapt for alarm registers at any offset
Date: Tue, 25 Jan 2022 15:00:02 -0500 [thread overview]
Message-ID: <20220125200009.900660-4-hugo@hugovil.com> (raw)
In-Reply-To: <20220125200009.900660-1-hugo@hugovil.com>
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
This will simplify the implementation of new variants into this driver.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/rtc/rtc-pcf2127.c | 42 ++++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 144b4da8d7f1..7a13a34eb21b 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -56,11 +56,14 @@
/* Time and date registers bits */
#define PCF2127_BIT_SC_OSF BIT(7)
/* Alarm registers */
-#define PCF2127_REG_ALARM_SC 0x0A
-#define PCF2127_REG_ALARM_MN 0x0B
-#define PCF2127_REG_ALARM_HR 0x0C
-#define PCF2127_REG_ALARM_DM 0x0D
-#define PCF2127_REG_ALARM_DW 0x0E
+#define PCF2127_REG_ALARM_BASE 0x0A
+/* Alarm registers offsets (starting from base register) */
+#define PCF2127_OFFSET_ALARM_SC 0
+#define PCF2127_OFFSET_ALARM_MN 1
+#define PCF2127_OFFSET_ALARM_HR 2
+#define PCF2127_OFFSET_ALARM_DM 3
+#define PCF2127_OFFSET_ALARM_DW 4
+/* Alarm bits */
#define PCF2127_BIT_ALARM_AE BIT(7)
/* CLKOUT control register */
#define PCF2127_REG_CLKOUT 0x0f
@@ -110,6 +113,7 @@ struct pcf21xx_config {
unsigned int has_nvmem:1;
unsigned int has_bit_wd_ctl_cd0:1;
u8 regs_td_base; /* Time/data base registers. */
+ u8 regs_alarm_base; /* Alarm function base registers. */
};
struct pcf2127 {
@@ -401,18 +405,18 @@ static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret)
return ret;
- ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf,
- sizeof(buf));
+ ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_alarm_base,
+ buf, sizeof(buf));
if (ret)
return ret;
alrm->enabled = ctrl2 & PCF2127_BIT_CTRL2_AIE;
alrm->pending = ctrl2 & PCF2127_BIT_CTRL2_AF;
- alrm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
- alrm->time.tm_min = bcd2bin(buf[1] & 0x7F);
- alrm->time.tm_hour = bcd2bin(buf[2] & 0x3F);
- alrm->time.tm_mday = bcd2bin(buf[3] & 0x3F);
+ alrm->time.tm_sec = bcd2bin(buf[PCF2127_OFFSET_ALARM_SC] & 0x7F);
+ alrm->time.tm_min = bcd2bin(buf[PCF2127_OFFSET_ALARM_MN] & 0x7F);
+ alrm->time.tm_hour = bcd2bin(buf[PCF2127_OFFSET_ALARM_HR] & 0x3F);
+ alrm->time.tm_mday = bcd2bin(buf[PCF2127_OFFSET_ALARM_DM] & 0x3F);
return 0;
}
@@ -446,14 +450,14 @@ static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret)
return ret;
- buf[0] = bin2bcd(alrm->time.tm_sec);
- buf[1] = bin2bcd(alrm->time.tm_min);
- buf[2] = bin2bcd(alrm->time.tm_hour);
- buf[3] = bin2bcd(alrm->time.tm_mday);
- buf[4] = PCF2127_BIT_ALARM_AE; /* Do not match on week day */
+ buf[PCF2127_OFFSET_ALARM_SC] = bin2bcd(alrm->time.tm_sec);
+ buf[PCF2127_OFFSET_ALARM_MN] = bin2bcd(alrm->time.tm_min);
+ buf[PCF2127_OFFSET_ALARM_HR] = bin2bcd(alrm->time.tm_hour);
+ buf[PCF2127_OFFSET_ALARM_DM] = bin2bcd(alrm->time.tm_mday);
+ buf[PCF2127_OFFSET_ALARM_DW] = PCF2127_BIT_ALARM_AE; /* Do not match on week day */
- ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf,
- sizeof(buf));
+ ret = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_alarm_base,
+ buf, sizeof(buf));
if (ret)
return ret;
@@ -658,12 +662,14 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
.has_nvmem = 1,
.has_bit_wd_ctl_cd0 = 1,
.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
+ .regs_alarm_base = PCF2127_REG_ALARM_BASE,
},
[PCF2129] = {
.max_register = 0x19,
.has_nvmem = 0,
.has_bit_wd_ctl_cd0 = 0,
.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
+ .regs_alarm_base = PCF2127_REG_ALARM_BASE,
},
};
--
2.30.2
next prev parent reply other threads:[~2022-01-25 20:00 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220125200009.900660-1-hugo@hugovil.com>
2022-01-25 20:00 ` [PATCH 01/10] rtc: pcf2127: add variant-specific configuration structure Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 02/10] rtc: pcf2127: adapt for time/date registers at any offset Hugo Villeneuve
2022-01-25 20:00 ` Hugo Villeneuve [this message]
2022-01-25 20:00 ` [PATCH 04/10] rtc: pcf2127: adapt for WD " Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 05/10] rtc: pcf2127: adapt for CLKOUT register " Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 06/10] rtc: pcf2127: add support for multiple TS functions Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 07/10] rtc: pcf2127: add support for PCF2131 RTC Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 08/10] rtc: pcf2127: add support for PCF2131 alarm interrupt on outputs INT_A/B Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 09/10] dt-bindings: rtc: pcf2127: add PCF2131 Hugo Villeneuve
2022-02-09 3:23 ` Rob Herring
2022-01-25 20:00 ` [PATCH 10/10] dt-bindings: rtc: pcf2127: add PCF2131 INT_A and INT_B support Hugo Villeneuve
2022-02-09 3:20 ` Rob Herring
2022-02-10 22:12 ` Hugo Villeneuve
2022-02-10 22:32 ` Alexandre Belloni
2022-02-10 22:55 ` Hugo Villeneuve
2022-02-11 20:16 ` Hugo Villeneuve
2022-02-11 21:02 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125200009.900660-4-hugo@hugovil.com \
--to=hugo@hugovil.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=hvilleneuve@dimonoff.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®