mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <UNGLinuxDriver@microchip.com>, <davem@davemloft.net>,
	<kuba@kernel.org>, <linux@armlinux.org.uk>,
	<f.fainelli@gmail.com>, <vivien.didelot@gmail.com>,
	<vladimir.oltean@nxp.com>, <andrew@lunn.ch>,
	Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [PATCH net-next 2/3] net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED
Date: Fri, 4 Feb 2022 10:14:51 +0100	[thread overview]
Message-ID: <20220204091452.403706-3-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <20220204091452.403706-1-horatiu.vultur@microchip.com>

The callback allows to enable/disable multicast snooping.
When the snooping is enabled, all IGMP and MLD frames are redirected to
the CPU, therefore make sure not to set the skb flag 'offload_fwd_mark'.
The HW will not flood multicast ipv4/ipv6 data frames.
When the snooping is disabled, the HW will flood IGMP, MLD and multicast
ipv4/ipv6 frames according to the mcast_flood flag.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 .../ethernet/microchip/lan966x/lan966x_main.c | 35 +++++++++++-
 .../ethernet/microchip/lan966x/lan966x_main.h |  1 +
 .../ethernet/microchip/lan966x/lan966x_regs.h | 18 ++++++
 .../microchip/lan966x/lan966x_switchdev.c     | 57 +++++++++++++++++++
 4 files changed, 110 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
index 3d1072955183..d62484f14564 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
@@ -4,11 +4,13 @@
 #include <linux/if_bridge.h>
 #include <linux/if_vlan.h>
 #include <linux/iopoll.h>
+#include <linux/ip.h>
 #include <linux/of_platform.h>
 #include <linux/of_net.h>
 #include <linux/packing.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>
+#include <net/addrconf.h>
 
 #include "lan966x_main.h"
 
@@ -419,6 +421,32 @@ bool lan966x_netdevice_check(const struct net_device *dev)
 	return dev->netdev_ops == &lan966x_port_netdev_ops;
 }
 
+static bool lan966x_hw_offload(struct lan966x *lan966x, u32 port,
+			       struct sk_buff *skb)
+{
+	u32 val;
+
+	/* The IGMP and MLD frames are not forward by the HW if
+	 * multicast snooping is enabled, therefor don't mark as
+	 * offload to allow the SW to forward the frames accordingly.
+	 */
+	val = lan_rd(lan966x, ANA_CPU_FWD_CFG(port));
+	if (!(val & (ANA_CPU_FWD_CFG_IGMP_REDIR_ENA |
+		     ANA_CPU_FWD_CFG_MLD_REDIR_ENA)))
+		return true;
+
+	if (skb->protocol == htons(ETH_P_IP) &&
+	    ip_hdr(skb)->protocol == IPPROTO_IGMP)
+		return false;
+
+	if (skb->protocol == htons(ETH_P_IPV6) &&
+	    ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr) &&
+	    !ipv6_mc_check_mld(skb))
+		return false;
+
+	return true;
+}
+
 static int lan966x_port_xtr_status(struct lan966x *lan966x, u8 grp)
 {
 	return lan_rd(lan966x, QS_XTR_RD(grp));
@@ -563,9 +591,14 @@ static irqreturn_t lan966x_xtr_irq_handler(int irq, void *args)
 		lan966x_ptp_rxtstamp(lan966x, skb, timestamp);
 		skb->protocol = eth_type_trans(skb, dev);
 
-		if (lan966x->bridge_mask & BIT(src_port))
+		if (lan966x->bridge_mask & BIT(src_port)) {
 			skb->offload_fwd_mark = 1;
 
+			skb_reset_network_header(skb);
+			if (!lan966x_hw_offload(lan966x, src_port, skb))
+				skb->offload_fwd_mark = 0;
+		}
+
 		netif_rx_ni(skb);
 		dev->stats.rx_bytes += len;
 		dev->stats.rx_packets++;
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.h b/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
index 026474c609ea..31fc54214041 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
@@ -170,6 +170,7 @@ struct lan966x_port {
 	bool vlan_aware;
 
 	bool learn_ena;
+	bool mcast_ena;
 
 	struct phylink_config phylink_config;
 	struct phylink_pcs phylink_pcs;
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h b/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
index 37a5d7e63cb6..0c0b3e173d53 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
@@ -299,6 +299,24 @@ enum lan966x_target {
 /*      ANA:PORT:CPU_FWD_CFG */
 #define ANA_CPU_FWD_CFG(g)        __REG(TARGET_ANA, 0, 1, 28672, g, 9, 128, 96, 0, 1, 4)
 
+#define ANA_CPU_FWD_CFG_MLD_REDIR_ENA            BIT(6)
+#define ANA_CPU_FWD_CFG_MLD_REDIR_ENA_SET(x)\
+	FIELD_PREP(ANA_CPU_FWD_CFG_MLD_REDIR_ENA, x)
+#define ANA_CPU_FWD_CFG_MLD_REDIR_ENA_GET(x)\
+	FIELD_GET(ANA_CPU_FWD_CFG_MLD_REDIR_ENA, x)
+
+#define ANA_CPU_FWD_CFG_IGMP_REDIR_ENA           BIT(5)
+#define ANA_CPU_FWD_CFG_IGMP_REDIR_ENA_SET(x)\
+	FIELD_PREP(ANA_CPU_FWD_CFG_IGMP_REDIR_ENA, x)
+#define ANA_CPU_FWD_CFG_IGMP_REDIR_ENA_GET(x)\
+	FIELD_GET(ANA_CPU_FWD_CFG_IGMP_REDIR_ENA, x)
+
+#define ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA       BIT(4)
+#define ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA_SET(x)\
+	FIELD_PREP(ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA, x)
+#define ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA_GET(x)\
+	FIELD_GET(ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA, x)
+
 #define ANA_CPU_FWD_CFG_SRC_COPY_ENA             BIT(3)
 #define ANA_CPU_FWD_CFG_SRC_COPY_ENA_SET(x)\
 	FIELD_PREP(ANA_CPU_FWD_CFG_SRC_COPY_ENA, x)
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c b/drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c
index 7de55f6a4da8..cf2535c18df8 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c
@@ -9,6 +9,37 @@ static struct notifier_block lan966x_netdevice_nb __read_mostly;
 static struct notifier_block lan966x_switchdev_nb __read_mostly;
 static struct notifier_block lan966x_switchdev_blocking_nb __read_mostly;
 
+static void lan966x_port_set_mcast_ip_flood(struct lan966x_port *port,
+					    u32 pgid_ip)
+{
+	struct lan966x *lan966x = port->lan966x;
+	u32 flood_mask_ip;
+
+	flood_mask_ip = lan_rd(lan966x, ANA_PGID(pgid_ip));
+	flood_mask_ip = ANA_PGID_PGID_GET(flood_mask_ip);
+
+	/* If mcast snooping is not enabled then use mcast flood mask
+	 * to decide to enable multicast flooding or not.
+	 */
+	if (!port->mcast_ena) {
+		u32 flood_mask;
+
+		flood_mask = lan_rd(lan966x, ANA_PGID(PGID_MC));
+		flood_mask = ANA_PGID_PGID_GET(flood_mask);
+
+		if (flood_mask & BIT(port->chip_port))
+			flood_mask_ip |= BIT(port->chip_port);
+		else
+			flood_mask_ip &= ~BIT(port->chip_port);
+	} else {
+		flood_mask_ip &= ~BIT(port->chip_port);
+	}
+
+	lan_rmw(ANA_PGID_PGID_SET(flood_mask_ip),
+		ANA_PGID_PGID,
+		lan966x, ANA_PGID(pgid_ip));
+}
+
 static void lan966x_port_set_mcast_flood(struct lan966x_port *port,
 					 bool enabled)
 {
@@ -23,6 +54,11 @@ static void lan966x_port_set_mcast_flood(struct lan966x_port *port,
 	lan_rmw(ANA_PGID_PGID_SET(val),
 		ANA_PGID_PGID,
 		port->lan966x, ANA_PGID(PGID_MC));
+
+	if (!port->mcast_ena) {
+		lan966x_port_set_mcast_ip_flood(port, PGID_MCIPV4);
+		lan966x_port_set_mcast_ip_flood(port, PGID_MCIPV6);
+	}
 }
 
 static void lan966x_port_set_ucast_flood(struct lan966x_port *port,
@@ -144,6 +180,24 @@ static void lan966x_port_ageing_set(struct lan966x_port *port,
 	lan966x_mac_set_ageing(port->lan966x, ageing_time);
 }
 
+static void lan966x_port_mc_set(struct lan966x_port *port, bool mcast_ena)
+{
+	struct lan966x *lan966x = port->lan966x;
+
+	port->mcast_ena = mcast_ena;
+
+	lan_rmw(ANA_CPU_FWD_CFG_IGMP_REDIR_ENA_SET(mcast_ena) |
+		ANA_CPU_FWD_CFG_MLD_REDIR_ENA_SET(mcast_ena) |
+		ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA_SET(mcast_ena),
+		ANA_CPU_FWD_CFG_IGMP_REDIR_ENA |
+		ANA_CPU_FWD_CFG_MLD_REDIR_ENA |
+		ANA_CPU_FWD_CFG_IPMC_CTRL_COPY_ENA,
+		lan966x, ANA_CPU_FWD_CFG(port->chip_port));
+
+	lan966x_port_set_mcast_ip_flood(port, PGID_MCIPV4);
+	lan966x_port_set_mcast_ip_flood(port, PGID_MCIPV6);
+}
+
 static int lan966x_port_attr_set(struct net_device *dev, const void *ctx,
 				 const struct switchdev_attr *attr,
 				 struct netlink_ext_ack *extack)
@@ -171,6 +225,9 @@ static int lan966x_port_attr_set(struct net_device *dev, const void *ctx,
 		lan966x_vlan_port_set_vlan_aware(port, attr->u.vlan_filtering);
 		lan966x_vlan_port_apply(port);
 		break;
+	case SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED:
+		lan966x_port_mc_set(port, !attr->u.mc_disabled);
+		break;
 	default:
 		err = -EOPNOTSUPP;
 		break;
-- 
2.33.0


  parent reply	other threads:[~2022-02-04  9:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04  9:14 [PATCH net-next 0/3] net: lan966x: add support for mcast snooping Horatiu Vultur
2022-02-04  9:14 ` [PATCH net-next 1/3] net: lan966x: Update the PGID used by IPV6 data frames Horatiu Vultur
2022-02-04  9:14 ` Horatiu Vultur [this message]
2022-02-04  9:14 ` [PATCH net-next 3/3] net: lan966x: Update mdb when enabling/disabling mcast_snooping Horatiu Vultur
2022-02-05 15:10 ` [PATCH net-next 0/3] net: lan966x: add support for mcast snooping patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220204091452.403706-3-horatiu.vultur@microchip.com \
    --to=horatiu.vultur@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®