From: Martin Kaiser <martin@kaiser.cx>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Michael Straube <straube.linux@gmail.com>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Martin Kaiser <martin@kaiser.cx>
Subject: [PATCH 6/8] staging: r8188eu: RfRegChnlVal[1] is set but not used
Date: Sat, 5 Feb 2022 12:37:39 +0100 [thread overview]
Message-ID: <20220205113741.379070-7-martin@kaiser.cx> (raw)
In-Reply-To: <20220205113741.379070-1-martin@kaiser.cx>
RfRegChnlVal[1] in hal_data_8188e is set but not used. This driver needs
only one RfRegChnlVal setting. Replace the array with a single u32.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 4 ++--
drivers/staging/r8188eu/hal/rtl8188e_rf6052.c | 8 ++++----
drivers/staging/r8188eu/hal/usb_halinit.c | 3 +--
drivers/staging/r8188eu/include/rtl8188e_hal.h | 2 +-
4 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index 6e26359bdda7..cd82452238e0 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -724,8 +724,8 @@ static void _PHY_SwChnl8192C(struct adapter *Adapter, u8 channel)
/* s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel */
param1 = RF_CHNLBW;
param2 = channel;
- pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffffc00) | param2);
- rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ pHalData->RfRegChnlVal = ((pHalData->RfRegChnlVal & 0xfffffc00) | param2);
+ rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal);
}
void PHY_SwChnl8188E(struct adapter *Adapter, u8 channel)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_rf6052.c b/drivers/staging/r8188eu/hal/rtl8188e_rf6052.c
index ea847ec39e13..2d5d04b384d1 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_rf6052.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_rf6052.c
@@ -50,12 +50,12 @@ void rtl8188e_PHY_RF6052SetBandwidth(struct adapter *Adapter,
switch (Bandwidth) {
case HT_CHANNEL_WIDTH_20:
- pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10) | BIT(11));
- rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ pHalData->RfRegChnlVal = ((pHalData->RfRegChnlVal & 0xfffff3ff) | BIT(10) | BIT(11));
+ rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal);
break;
case HT_CHANNEL_WIDTH_40:
- pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10));
- rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ pHalData->RfRegChnlVal = ((pHalData->RfRegChnlVal & 0xfffff3ff) | BIT(10));
+ rtl8188e_PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal);
break;
default:
break;
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index f21b910bd88d..e8bc4a115a2b 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -668,8 +668,7 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
/* Keep RfRegChnlVal for later use. */
- haldata->RfRegChnlVal[0] = rtl8188e_PHY_QueryRFReg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
- haldata->RfRegChnlVal[1] = rtl8188e_PHY_QueryRFReg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
+ haldata->RfRegChnlVal = rtl8188e_PHY_QueryRFReg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
_BBTurnOnBlock(Adapter);
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index c323476f5936..c6472d13e069 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -143,7 +143,7 @@ struct hal_data_8188e {
struct bb_reg_def PHYRegDef[2]; /* Radio A/B */
- u32 RfRegChnlVal[2];
+ u32 RfRegChnlVal;
/* for host message to fw */
u8 LastHMEBoxNum;
--
2.30.2
next prev parent reply other threads:[~2022-02-05 11:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-05 11:37 [PATCH 0/8] staging: r8188eu: more rf cleanups Martin Kaiser
2022-02-05 11:37 ` [PATCH 1/8] staging: r8188eu: TXPowercount is set but not used Martin Kaiser
2022-02-05 11:37 ` [PATCH 2/8] staging: r8188eu: TXPowerTrackingCallbackCnt " Martin Kaiser
2022-02-05 11:37 ` [PATCH 3/8] staging: r8188eu: bTXPowerTrackingInit " Martin Kaiser
2022-02-05 11:37 ` [PATCH 4/8] staging: r8188eu: bTXPowerTracking " Martin Kaiser
2022-02-05 11:37 ` [PATCH 5/8] staging: r8188eu: remove constant rf variable Martin Kaiser
2022-02-05 11:37 ` Martin Kaiser [this message]
2022-02-05 11:37 ` [PATCH 7/8] staging: r8188eu: use a define for the radio path Martin Kaiser
2022-02-05 11:37 ` [PATCH 8/8] staging: r8188eu: limit rf register writes to path a Martin Kaiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220205113741.379070-7-martin@kaiser.cx \
--to=martin@kaiser.cx \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®