mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Viorel Suman (OSS)" <viorel.suman@oss.nxp.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@freescale.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Viorel Suman <viorel.suman@nxp.com>,
	patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: codec: wm8960: complete discharge on BIAS OFF->STANDBY
Date: Tue,  8 Feb 2022 14:17:27 +0200	[thread overview]
Message-ID: <20220208121727.4461-1-viorel.suman@oss.nxp.com> (raw)

From: Viorel Suman <viorel.suman@nxp.com>

On BIAS STANDBY->OFF transition the current implementation sleeps
600ms on suspend in order to discharge the chip. The suspend is
propagated from "snd_soc_suspend" call for all audio cards in a
serial fashion, thus in case of boards like i.MX8DXL EVK which has
3 distinct WM8960 codecs the total cumulated sleep on suspend is 1.8
seconds.

On the other hand the BIAS OFF->STANDBY transition happens
asynchronously with regard to "snd_soc_resume" - the call is
propagated from "soc_resume_deferred" which is just scheduled
from "snd_soc_resume", each card having its own work scheduled to
execute "soc_resume_deferred" call.

The patch performs discharge completion on BIAS OFF->STANDBY transition
so that the cumulated effect on suspend described above is avoided
and discharge is completed in paralel in case of multiple WM8960
codecs on the board.

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
---
 sound/soc/codecs/wm8960.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 75de6a81465df..b7a2246184e08 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -45,6 +45,8 @@
 #define WM8960_DISOP     0x40
 #define WM8960_DRES_MASK 0x30
 
+#define WM8960_DSCH_TOUT	600 /* discharge timeout, ms */
+
 static bool is_pll_freq_available(unsigned int source, unsigned int target);
 static int wm8960_set_pll(struct snd_soc_component *component,
 		unsigned int freq_in, unsigned int freq_out);
@@ -133,6 +135,7 @@ struct wm8960_priv {
 	int freq_in;
 	bool is_stream_in_use[2];
 	struct wm8960_data pdata;
+	ktime_t dsch_start;
 };
 
 #define wm8960_reset(c)	regmap_write(c, WM8960_RESET, 0)
@@ -898,6 +901,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
 	struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
 	u16 pm2 = snd_soc_component_read(component, WM8960_POWER2);
 	int ret;
+	ktime_t tout;
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
@@ -944,6 +948,11 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
 
 	case SND_SOC_BIAS_STANDBY:
 		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+			/* ensure discharge is complete */
+			tout = WM8960_DSCH_TOUT - ktime_ms_delta(ktime_get(), wm8960->dsch_start);
+			if (tout > 0)
+				msleep(tout);
+
 			regcache_sync(wm8960->regmap);
 
 			/* Enable anti-pop features */
@@ -973,9 +982,9 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
 			     WM8960_POBCTRL | WM8960_SOFT_ST |
 			     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
 
-		/* Disable VMID and VREF, let them discharge */
+		/* Disable VMID and VREF, mark discharge */
 		snd_soc_component_write(component, WM8960_POWER1, 0);
-		msleep(600);
+		wm8960->dsch_start = ktime_get();
 		break;
 	}
 
-- 
2.26.3


             reply	other threads:[~2022-02-08 13:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08 12:17 Viorel Suman (OSS) [this message]
2022-02-14 14:55 ` Mark Brown
2022-02-15 10:55 ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220208121727.4461-1-viorel.suman@oss.nxp.com \
    --to=viorel.suman@oss.nxp.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=daniel.baluta@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=shengjiu.wang@freescale.com \
    --cc=tiwai@suse.com \
    --cc=viorel.suman@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®