From: Waiman Long <longman@redhat.com>
To: Christian Brauner <brauner@kernel.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jens Axboe <axboe@kernel.dk>, Alexey Gladkov <legion@kernel.org>,
David Hildenbrand <david@redhat.com>,
Jann Horn <jannh@google.com>, Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-kernel@vger.kernel.org, Waiman Long <longman@redhat.com>
Subject: [PATCH] copy_process(): Move fd_install() out of sighand->siglock critical section
Date: Tue, 8 Feb 2022 11:39:12 -0500 [thread overview]
Message-ID: <20220208163912.1084752-1-longman@redhat.com> (raw)
I was made aware of the following lockdep splat:
[ 2516.308763] =====================================================
[ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted
[ 2516.309703] -----------------------------------------------------
[ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0
[ 2516.310944]
and this task is already holding:
[ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80
[ 2516.311804] which would create a new lock dependency:
[ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2}
[ 2516.312446]
but this new dependency connects a HARDIRQ-irq-safe lock:
[ 2516.312983] (&sighand->siglock){-.-.}-{2:2}
:
[ 2516.330700] Possible interrupt unsafe locking scenario:
[ 2516.331075] CPU0 CPU1
[ 2516.331328] ---- ----
[ 2516.331580] lock(&newf->file_lock);
[ 2516.331790] local_irq_disable();
[ 2516.332231] lock(&sighand->siglock);
[ 2516.332579] lock(&newf->file_lock);
[ 2516.332922] <Interrupt>
[ 2516.333069] lock(&sighand->siglock);
[ 2516.333291]
*** DEADLOCK ***
[ 2516.389845]
stack backtrace:
[ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1
[ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2516.391155] Call trace:
[ 2516.391302] dump_backtrace+0x0/0x3e0
[ 2516.391518] show_stack+0x24/0x30
[ 2516.391717] dump_stack_lvl+0x9c/0xd8
[ 2516.391938] dump_stack+0x1c/0x38
[ 2516.392247] print_bad_irq_dependency+0x620/0x710
[ 2516.392525] check_irq_usage+0x4fc/0x86c
[ 2516.392756] check_prev_add+0x180/0x1d90
[ 2516.392988] validate_chain+0x8e0/0xee0
[ 2516.393215] __lock_acquire+0x97c/0x1e40
[ 2516.393449] lock_acquire.part.0+0x240/0x570
[ 2516.393814] lock_acquire+0x90/0xb4
[ 2516.394021] _raw_spin_lock+0xe8/0x154
[ 2516.394244] fd_install+0x368/0x4f0
[ 2516.394451] copy_process+0x1f5c/0x3e80
[ 2516.394678] kernel_clone+0x134/0x660
[ 2516.394895] __do_sys_clone3+0x130/0x1f4
[ 2516.395128] __arm64_sys_clone3+0x5c/0x7c
[ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0
[ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4
[ 2516.396050] do_el0_svc+0xb0/0x10c
[ 2516.396252] el0_svc+0x24/0x34
[ 2516.396436] el0t_64_sync_handler+0xa4/0x12c
[ 2516.396688] el0t_64_sync+0x198/0x19c
[ 2517.491197] NET: Registered PF_ATMPVC protocol family
[ 2517.491524] NET: Registered PF_ATMSVC protocol family
[ 2591.991877] sched: RT throttling activated
One way to solve this problem is to move the fd_install() call out of
the sighand->siglock critical section.
Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close()
on cleanups"), the pidfd installation was done without holding both
the task_list lock and the sighand->siglock. Obviously, holding these
two locks are not really needed to protect the fd_install() call.
So move the fd_install() call down to after the releases of both locks.
Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups")
Signed-off-by: Waiman Long <longman@redhat.com>
---
kernel/fork.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/kernel/fork.c b/kernel/fork.c
index d75a528f7b21..007af7fb47c7 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2323,10 +2323,6 @@ static __latent_entropy struct task_struct *copy_process(
goto bad_fork_cancel_cgroup;
}
- /* past the last point of failure */
- if (pidfile)
- fd_install(pidfd, pidfile);
-
init_task_pid_links(p);
if (likely(p->pid)) {
ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace);
@@ -2375,6 +2371,9 @@ static __latent_entropy struct task_struct *copy_process(
syscall_tracepoint_update(p);
write_unlock_irq(&tasklist_lock);
+ if (pidfile)
+ fd_install(pidfd, pidfile);
+
proc_fork_connector(p);
sched_post_fork(p, args);
cgroup_post_fork(p, args);
--
2.27.0
next reply other threads:[~2022-02-08 16:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-08 16:39 Waiman Long [this message]
2022-02-08 18:16 ` Al Viro
2022-02-08 18:51 ` Waiman Long
2022-02-08 19:07 ` Al Viro
2022-02-08 21:59 ` Eric W. Biederman
2022-02-08 22:16 ` Al Viro
2022-02-08 22:25 ` Eric W. Biederman
2022-02-09 16:25 ` Waiman Long
2022-02-11 8:27 ` Christian Brauner
2022-02-09 22:18 ` Eric W. Biederman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220208163912.1084752-1-longman@redhat.com \
--to=longman@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=axboe@kernel.dk \
--cc=brauner@kernel.org \
--cc=david@redhat.com \
--cc=ebiederm@xmission.com \
--cc=jannh@google.com \
--cc=legion@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®