[PATCH v2 6/7] ARM: dts: sti: move usb picophy nodes out of soc in stih410.dtsi

[Alain Volmat <avolmat@me.com>]

Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
Since they are controlled via syscfg, there is no reg property needed,
which is required when having the node within the soc section.

Modification is done within stih410.dtsi and within related board
dts files (stih410-b2120.dts, stih410-b2260.dts).

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: squash together 3 commits from v1 to avoid compilation issues

 arch/arm/boot/dts/stih410-b2120.dts | 16 +++++------
 arch/arm/boot/dts/stih410-b2260.dts | 16 +++++------
 arch/arm/boot/dts/stih410.dtsi      | 42 ++++++++++++++---------------
 3 files changed, 36 insertions(+), 38 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9d3b118f5f0f..538ff98ca1b1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -24,6 +24,14 @@ aliases {
 		ethernet0 = &ethernet0;
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 
 		mmc0: sdhci@9060000 {
@@ -33,14 +41,6 @@ mmc0: sdhci@9060000 {
 			sd-uhs-ddr50;
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index c2d3b6de55d0..26d93f26f6d0 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -82,6 +82,14 @@ phy_port1: port@9b2a000 {
 		};
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 		/* Low speed expansion connector */
 		uart0: serial@9830000 {
@@ -152,14 +160,6 @@ pwm1: pwm@9510000 {
 			status = "okay";
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index fe83d9a522bf..ce2f62cf129b 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@ aliases {
 		bdisp0 = &bdisp0;
 	};
 
-	soc {
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+
+		status = "disabled";
+	};
 
-			status = "disabled";
-		};
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
 
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
-
-			status = "disabled";
-		};
+		status = "disabled";
+	};
 
+	soc {
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
-- 
2.25.1