From: Potin Lai <potin.lai@quantatw.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>
Cc: Patrick Williams <patrick@stwcx.xyz>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Potin Lai <potin.lai@quantatw.com>
Subject: [PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander
Date: Wed, 16 Feb 2022 00:31:47 +0800 [thread overview]
Message-ID: <20220215163151.32252-7-potin.lai@quantatw.com> (raw)
In-Reply-To: <20220215163151.32252-1-potin.lai@quantatw.com>
Enable interrupt support for all sledx_ioexp, so userspace can monitor
gpio from io expander by interrupt
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
---
.../dts/aspeed-bmc-facebook-bletchley.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index 08fa4c7b5ed4..ba9ac01cc585 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -6,6 +6,7 @@
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Facebook Bletchley BMC";
@@ -267,6 +268,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
@@ -330,6 +334,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
@@ -397,6 +404,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
@@ -460,6 +470,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
@@ -523,6 +536,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
@@ -586,6 +602,9 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
--
2.17.1
next prev parent reply other threads:[~2022-02-15 16:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-15 16:31 [PATCH v3 00/10] update Facebook Bletchley BMC Potin Lai
2022-02-15 16:31 ` [PATCH v3 01/10] ARM: dts: aspeed: bletchley: switch sled numbering to 1-based Potin Lai
2022-02-15 16:31 ` [PATCH v3 02/10] ARM: dts: aspeed: bletchley: separate leds into multiple groups Potin Lai
2022-02-15 16:31 ` [PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names Potin Lai
2022-02-15 16:31 ` [PATCH v3 04/10] ARM: dts: aspeed: bletchley: update fmc configurations Potin Lai
2022-02-15 16:31 ` [PATCH v3 05/10] ARM: dts: aspeed: bletchley: switch to spi-gpio for spi2 Potin Lai
2022-02-15 16:31 ` Potin Lai [this message]
2022-02-15 16:31 ` [PATCH v3 07/10] ARM: dts: aspeed: bletchley: add shunt-resistor for ADM1278 Potin Lai
2022-02-15 16:31 ` [PATCH v3 08/10] ARM: dts: aspeed: bletchley: add INA230 sensor on each sled Potin Lai
2022-02-15 16:31 ` [PATCH v3 09/10] ARM: dts: aspeed: bletchley: enable mdio3 bus Potin Lai
2022-02-15 16:31 ` [PATCH v3 10/10] ARM: dts: aspeed: bletchley: cleanup redundant nodes Potin Lai
2022-02-16 5:01 ` [PATCH v3 00/10] update Facebook Bletchley BMC Joel Stanley
2022-02-16 17:17 ` Patrick Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220215163151.32252-7-potin.lai@quantatw.com \
--to=potin.lai@quantatw.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®