Re: [PATCH v1 12/14] mtd: spi-nor: move all spansion specifics into spansion.c

[Pratyush Yadav <p.yadav@ti.com>]

On 10/02/22 03:32AM, Tudor.Ambarus@microchip.com wrote:
> On 2/2/22 16:58, Michael Walle wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > The clear status register flags is only available on spansion flashes.
> > Move all the functions around that into the spanion module.
> > 
> > Signed-off-by: Michael Walle <michael@walle.cc>
> > ---
> >  drivers/mtd/spi-nor/core.c     | 52 +------------------------
> >  drivers/mtd/spi-nor/spansion.c | 70 ++++++++++++++++++++++++++++++++++
> >  include/linux/mtd/spi-nor.h    |  1 -
> >  3 files changed, 72 insertions(+), 51 deletions(-)
> > 
> > diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> > index be65aaa954ca..5b00dfab77a6 100644
> > --- a/drivers/mtd/spi-nor/core.c
> > +++ b/drivers/mtd/spi-nor/core.c
> > @@ -554,33 +554,6 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
> >         return ret;
> >  }
> > 
> > -/**
> > - * spi_nor_clear_sr() - Clear the Status Register.
> > - * @nor:       pointer to 'struct spi_nor'.
> > - */
> > -static void spi_nor_clear_sr(struct spi_nor *nor)
> > -{
> > -       int ret;
> > -
> > -       if (nor->spimem) {
> > -               struct spi_mem_op op =
> > -                       SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 0),
> > -                                  SPI_MEM_OP_NO_ADDR,
> > -                                  SPI_MEM_OP_NO_DUMMY,
> > -                                  SPI_MEM_OP_NO_DATA);
> > -
> > -               spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> > -
> > -               ret = spi_mem_exec_op(nor->spimem, &op);
> > -       } else {
> > -               ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLSR,
> > -                                                      NULL, 0);
> > -       }
> > -
> > -       if (ret)
> > -               dev_dbg(nor->dev, "error %d clearing SR\n", ret);
> > -}
> > -
> >  /**
> >   * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
> >   * for new commands.
> > @@ -590,33 +563,12 @@ static void spi_nor_clear_sr(struct spi_nor *nor)
> >   */
> >  int spi_nor_sr_ready(struct spi_nor *nor)
> >  {
> > -       int ret = spi_nor_read_sr(nor, nor->bouncebuf);
> > +       int ret;
> > 
> > +       ret = spi_nor_read_sr(nor, nor->bouncebuf);
> >         if (ret)
> >                 return ret;
> 
> :) don't change style for no reason. What's wrong with the previous version?

FWIW, I like the newer style better. But that should come in a separate 
patch in either case.

> 
> Anyway, with the reports fixed and no hidden style changes, it looks good to me.
> 
> > 
> > -       if (nor->flags & SNOR_F_USE_CLSR &&
> > -           nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
> > -               if (nor->bouncebuf[0] & SR_E_ERR)
> > -                       dev_err(nor->dev, "Erase Error occurred\n");
> > -               else
> > -                       dev_err(nor->dev, "Programming Error occurred\n");
> > -
> > -               spi_nor_clear_sr(nor);
> > -
> > -               /*
> > -                * WEL bit remains set to one when an erase or page program
> > -                * error occurs. Issue a Write Disable command to protect
> > -                * against inadvertent writes that can possibly corrupt the
> > -                * contents of the memory.
> > -                */
> > -               ret = spi_nor_write_disable(nor);
> > -               if (ret)
> > -                       return ret;
> > -
> > -               return -EIO;
> > -       }
> > -
> >         return !(nor->bouncebuf[0] & SR_WIP);
> >  }
> > 
> > diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> > index dedc2de90cb8..4756fb88eab2 100644
> > --- a/drivers/mtd/spi-nor/spansion.c
> > +++ b/drivers/mtd/spi-nor/spansion.c
> > @@ -8,6 +8,7 @@
> > 
> >  #include "core.h"
> > 
> > +#define SPINOR_OP_CLSR         0x30    /* Clear status register 1 */
> >  #define SPINOR_OP_RD_ANY_REG                   0x65    /* Read any register */
> >  #define SPINOR_OP_WR_ANY_REG                   0x71    /* Write any register */
> >  #define SPINOR_REG_CYPRESS_CFR2V               0x00800003
> > @@ -294,6 +295,72 @@ static const struct flash_info spansion_parts[] = {
> >         },
> >  };
> > 
> > +/**
> > + * spi_nor_clear_sr() - Clear the Status Register.
> > + * @nor:       pointer to 'struct spi_nor'.
> > + */
> > +static void spi_nor_clear_sr(struct spi_nor *nor)
> > +{
> > +       int ret;
> > +
> > +       if (nor->spimem) {
> > +               struct spi_mem_op op =
> > +                       SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 0),
> > +                                  SPI_MEM_OP_NO_ADDR,
> > +                                  SPI_MEM_OP_NO_DUMMY,
> > +                                  SPI_MEM_OP_NO_DATA);
> > +
> > +               spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> > +
> > +               ret = spi_mem_exec_op(nor->spimem, &op);
> > +       } else {
> > +               ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLSR,
> > +                                                      NULL, 0);
> > +       }
> > +
> > +       if (ret)
> > +               dev_dbg(nor->dev, "error %d clearing SR\n", ret);
> > +}
> > +
> > +/**
> > + * spi_nor_sr_ready_and_clear() - Query the Status Register to see if the flash
> > + * is ready for new commands and clear it.
> > + * @nor:       pointer to 'struct spi_nor'.
> > + *
> > + * Return: 1 if ready, 0 if not ready, -errno on errors.
> > + */
> > +int spi_nor_sr_ready_and_clear(struct spi_nor *nor)

Make it static.

[...]

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.