From: Atish Patra <atishp@rivosinc.com>
To: linux-kernel@vger.kernel.org
Cc: Anup Patel <anup@brainfault.org>,
Atish Patra <atishp@rivosinc.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Atish Patra <atishp@atishpatra.org>,
Damien Le Moal <damien.lemoal@wdc.com>,
devicetree@vger.kernel.org, Jisheng Zhang <jszhang@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
linux-riscv@lists.infradead.org,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Rob Herring <robh+dt@kernel.org>
Subject: [v6 5/9] RISC-V: Add RISC-V SBI PMU extension definitions
Date: Fri, 18 Feb 2022 16:46:56 -0800 [thread overview]
Message-ID: <20220219004700.1973682-6-atishp@rivosinc.com> (raw)
In-Reply-To: <20220219004700.1973682-1-atishp@rivosinc.com>
From: Atish Patra <atish.patra@wdc.com>
This patch adds all the definitions defined by the SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
---
arch/riscv/include/asm/sbi.h | 95 ++++++++++++++++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index d1c37479d828..4a430ae60eaa 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -29,6 +29,7 @@ enum sbi_ext_id {
SBI_EXT_RFENCE = 0x52464E43,
SBI_EXT_HSM = 0x48534D,
SBI_EXT_SRST = 0x53525354,
+ SBI_EXT_PMU = 0x504D55,
/* Experimentals extensions must lie within this range */
SBI_EXT_EXPERIMENTAL_START = 0x08000000,
@@ -95,6 +96,98 @@ enum sbi_srst_reset_reason {
SBI_SRST_RESET_REASON_SYS_FAILURE,
};
+enum sbi_ext_pmu_fid {
+ SBI_EXT_PMU_NUM_COUNTERS = 0,
+ SBI_EXT_PMU_COUNTER_GET_INFO,
+ SBI_EXT_PMU_COUNTER_CFG_MATCH,
+ SBI_EXT_PMU_COUNTER_START,
+ SBI_EXT_PMU_COUNTER_STOP,
+ SBI_EXT_PMU_COUNTER_FW_READ,
+};
+
+#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(55, 0)
+#define RISCV_PMU_RAW_EVENT_IDX 0x20000
+
+/** General pmu event codes specified in SBI PMU extension */
+enum sbi_pmu_hw_generic_events_t {
+ SBI_PMU_HW_NO_EVENT = 0,
+ SBI_PMU_HW_CPU_CYCLES = 1,
+ SBI_PMU_HW_INSTRUCTIONS = 2,
+ SBI_PMU_HW_CACHE_REFERENCES = 3,
+ SBI_PMU_HW_CACHE_MISSES = 4,
+ SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5,
+ SBI_PMU_HW_BRANCH_MISSES = 6,
+ SBI_PMU_HW_BUS_CYCLES = 7,
+ SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8,
+ SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9,
+ SBI_PMU_HW_REF_CPU_CYCLES = 10,
+
+ SBI_PMU_HW_GENERAL_MAX,
+};
+
+/**
+ * Special "firmware" events provided by the firmware, even if the hardware
+ * does not support performance events. These events are encoded as a raw
+ * event type in Linux kernel perf framework.
+ */
+enum sbi_pmu_fw_generic_events_t {
+ SBI_PMU_FW_MISALIGNED_LOAD = 0,
+ SBI_PMU_FW_MISALIGNED_STORE = 1,
+ SBI_PMU_FW_ACCESS_LOAD = 2,
+ SBI_PMU_FW_ACCESS_STORE = 3,
+ SBI_PMU_FW_ILLEGAL_INSN = 4,
+ SBI_PMU_FW_SET_TIMER = 5,
+ SBI_PMU_FW_IPI_SENT = 6,
+ SBI_PMU_FW_IPI_RECVD = 7,
+ SBI_PMU_FW_FENCE_I_SENT = 8,
+ SBI_PMU_FW_FENCE_I_RECVD = 9,
+ SBI_PMU_FW_SFENCE_VMA_SENT = 10,
+ SBI_PMU_FW_SFENCE_VMA_RCVD = 11,
+ SBI_PMU_FW_SFENCE_VMA_ASID_SENT = 12,
+ SBI_PMU_FW_SFENCE_VMA_ASID_RCVD = 13,
+
+ SBI_PMU_FW_HFENCE_GVMA_SENT = 14,
+ SBI_PMU_FW_HFENCE_GVMA_RCVD = 15,
+ SBI_PMU_FW_HFENCE_GVMA_VMID_SENT = 16,
+ SBI_PMU_FW_HFENCE_GVMA_VMID_RCVD = 17,
+
+ SBI_PMU_FW_HFENCE_VVMA_SENT = 18,
+ SBI_PMU_FW_HFENCE_VVMA_RCVD = 19,
+ SBI_PMU_FW_HFENCE_VVMA_ASID_SENT = 20,
+ SBI_PMU_FW_HFENCE_VVMA_ASID_RCVD = 21,
+ SBI_PMU_FW_MAX,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_event_type {
+ SBI_PMU_EVENT_TYPE_HW = 0x0,
+ SBI_PMU_EVENT_TYPE_CACHE = 0x1,
+ SBI_PMU_EVENT_TYPE_RAW = 0x2,
+ SBI_PMU_EVENT_TYPE_FW = 0xf,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_ctr_type {
+ SBI_PMU_CTR_TYPE_HW = 0x0,
+ SBI_PMU_CTR_TYPE_FW,
+};
+
+/* Flags defined for config matching function */
+#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0)
+#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1)
+#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2)
+#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3)
+#define SBI_PMU_CFG_FLAG_SET_VSNH (1 << 4)
+#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5)
+#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6)
+#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7)
+
+/* Flags defined for counter start function */
+#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
+
+/* Flags defined for counter stop function */
+#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
+
#define SBI_SPEC_VERSION_DEFAULT 0x1
#define SBI_SPEC_VERSION_MAJOR_SHIFT 24
#define SBI_SPEC_VERSION_MAJOR_MASK 0x7f
@@ -108,6 +201,8 @@ enum sbi_srst_reset_reason {
#define SBI_ERR_DENIED -4
#define SBI_ERR_INVALID_ADDRESS -5
#define SBI_ERR_ALREADY_AVAILABLE -6
+#define SBI_ERR_ALREADY_STARTED -7
+#define SBI_ERR_ALREADY_STOPPED -8
extern unsigned long sbi_spec_version;
struct sbiret {
--
2.30.2
next prev parent reply other threads:[~2022-02-19 0:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-19 0:46 [v6 0/9] Improve RISC-V Perf support using SBI PMU and sscofpmf extension Atish Patra
2022-02-19 0:46 ` [v6 1/9] RISC-V: Remove the current perf implementation Atish Patra
2022-02-19 0:46 ` [v6 2/9] RISC-V: Add CSR encodings for all HPMCOUNTERS Atish Patra
2022-02-19 0:46 ` [v6 3/9] RISC-V: Add a perf core library for pmu drivers Atish Patra
2022-02-19 0:46 ` [v6 4/9] RISC-V: Add a simple platform driver for RISC-V legacy perf Atish Patra
2022-02-19 0:46 ` Atish Patra [this message]
2022-02-19 0:46 ` [v6 6/9] RISC-V: Add perf platform driver based on SBI PMU extension Atish Patra
2022-02-19 0:46 ` [v6 7/9] RISC-V: Add sscofpmf extension support Atish Patra
2022-02-19 0:46 ` [v6 8/9] Documentation: riscv: Remove the old documentation Atish Patra
2022-02-19 0:47 ` [v6 9/9] MAINTAINERS: Add entry for RISC-V PMU drivers Atish Patra
2022-03-12 7:51 ` [v6 0/9] Improve RISC-V Perf support using SBI PMU and sscofpmf extension Nikita Shubin
2022-03-21 23:57 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220219004700.1973682-6-atishp@rivosinc.com \
--to=atishp@rivosinc.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@atishpatra.org \
--cc=damien.lemoal@wdc.com \
--cc=devicetree@vger.kernel.org \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®