From: Michael Walle <michael@walle.cc>
To: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>,
Pratyush Yadav <p.yadav@ti.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
yaliang.wang@windriver.com, Michael Walle <michael@walle.cc>
Subject: [PATCH v3 13/32] mtd: spi-nor: sst: unify function names
Date: Mon, 21 Feb 2022 09:52:17 +0100 [thread overview]
Message-ID: <20220221085236.1452024-14-michael@walle.cc> (raw)
In-Reply-To: <20220221085236.1452024-1-michael@walle.cc>
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/mtd/spi-nor/sst.c | 44 +++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 30183e9189b9..63bcc97bf978 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -13,12 +13,12 @@
#define SST26VF_CR_BPNV BIT(3)
-static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+static int sst26vf_nor_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
return -EOPNOTSUPP;
}
-static int sst26vf_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+static int sst26vf_nor_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
int ret;
@@ -38,27 +38,27 @@ static int sst26vf_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
return spi_nor_global_block_unlock(nor);
}
-static int sst26vf_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+static int sst26vf_nor_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
{
return -EOPNOTSUPP;
}
-static const struct spi_nor_locking_ops sst26vf_locking_ops = {
- .lock = sst26vf_lock,
- .unlock = sst26vf_unlock,
- .is_locked = sst26vf_is_locked,
+static const struct spi_nor_locking_ops sst26vf_nor_locking_ops = {
+ .lock = sst26vf_nor_lock,
+ .unlock = sst26vf_nor_unlock,
+ .is_locked = sst26vf_nor_is_locked,
};
-static void sst26vf_late_init(struct spi_nor *nor)
+static void sst26vf_nor_late_init(struct spi_nor *nor)
{
- nor->params->locking_ops = &sst26vf_locking_ops;
+ nor->params->locking_ops = &sst26vf_nor_locking_ops;
}
-static const struct spi_nor_fixups sst26vf_fixups = {
- .late_init = sst26vf_late_init,
+static const struct spi_nor_fixups sst26vf_nor_fixups = {
+ .late_init = sst26vf_nor_late_init,
};
-static const struct flash_info sst_parts[] = {
+static const struct flash_info sst_nor_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8)
FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
@@ -114,11 +114,11 @@ static const struct flash_info sst_parts[] = {
{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
- .fixups = &sst26vf_fixups },
+ .fixups = &sst26vf_nor_fixups },
};
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int sst_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
struct spi_nor *nor = mtd_to_spi_nor(mtd);
size_t actual = 0;
@@ -203,19 +203,19 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
return ret;
}
-static void sst_late_init(struct spi_nor *nor)
+static void sst_nor_late_init(struct spi_nor *nor)
{
if (nor->info->mfr_flags & SST_WRITE)
- nor->mtd._write = sst_write;
+ nor->mtd._write = sst_nor_write;
}
-static const struct spi_nor_fixups sst_fixups = {
- .late_init = sst_late_init,
+static const struct spi_nor_fixups sst_nor_fixups = {
+ .late_init = sst_nor_late_init,
};
const struct spi_nor_manufacturer spi_nor_sst = {
.name = "sst",
- .parts = sst_parts,
- .nparts = ARRAY_SIZE(sst_parts),
- .fixups = &sst_fixups,
+ .parts = sst_nor_parts,
+ .nparts = ARRAY_SIZE(sst_nor_parts),
+ .fixups = &sst_nor_fixups,
};
--
2.30.2
next prev parent reply other threads:[~2022-02-21 8:54 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-21 8:52 [PATCH v3 00/32] mtd: spi-nor: move vendor specific code into vendor modules Michael Walle
2022-02-21 8:52 ` [PATCH v3 01/32] mtd: spi-nor: atmel: unify function names Michael Walle
2022-02-21 8:52 ` [PATCH v3 02/32] mtd: spi-nor: catalyst: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 03/32] mtd: spi-nor: eon: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 04/32] mtd: spi-nor: esmt: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 05/32] mtd: spi-nor: everspin: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 06/32] mtd: spi-nor: fujitsu: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 07/32] mtd: spi-nor: gigadevice: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 08/32] mtd: spi-nor: intel: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 09/32] mtd: spi-nor: issi: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 10/32] mtd: spi-nor: macronix: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 11/32] mtd: spi-nor: micron-st: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 12/32] mtd: spi-nor: spansion: " Michael Walle
2022-02-21 12:15 ` kernel test robot
2022-02-21 8:52 ` Michael Walle [this message]
2022-02-21 8:52 ` [PATCH v3 14/32] mtd: spi-nor: winbond: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 15/32] mtd: spi-nor: xilinx: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 16/32] mtd: spi-nor: xmc: " Michael Walle
2022-02-21 8:52 ` [PATCH v3 17/32] mtd: spi-nor: slightly refactor the spi_nor_setup() Michael Walle
2022-02-21 8:52 ` [PATCH v3 18/32] mtd: spi-nor: allow a flash to define its own ready() function Michael Walle
2022-02-21 8:52 ` [PATCH v3 19/32] mtd: spi-nor: export more function to be used in vendor modules Michael Walle
2022-02-21 8:52 ` [PATCH v3 20/32] mtd: spi-nor: guard _page_size parameter in S3AN_INFO() Michael Walle
2022-02-21 8:52 ` [PATCH v3 21/32] mtd: spi-nor: move all xilinx specifics into xilinx.c Michael Walle
2022-02-21 8:52 ` [PATCH v3 22/32] mtd: spi-nor: xilinx: rename vendor specific functions and defines Michael Walle
2022-02-21 8:52 ` [PATCH v3 23/32] mtd: spi-nor: xilinx: correct the debug message Michael Walle
2022-02-21 8:52 ` [PATCH v3 24/32] mtd: spi-nor: move all micron-st specifics into micron-st.c Michael Walle
2022-02-21 8:52 ` [PATCH v3 25/32] mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag Michael Walle
2022-02-21 8:52 ` [PATCH v3 26/32] mtd: spi-nor: micron-st: rename vendor specific functions and defines Michael Walle
2022-02-21 8:52 ` [PATCH v3 27/32] mtd: spi-nor: spansion: slightly rework control flow in late_init() Michael Walle
2022-02-21 8:52 ` [PATCH v3 28/32] mtd: spi-nor: move all spansion specifics into spansion.c Michael Walle
2022-02-21 8:52 ` [PATCH v3 29/32] mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag Michael Walle
2022-02-21 8:52 ` [PATCH v3 30/32] mtd: spi-nor: spansion: rename vendor specific functions and defines Michael Walle
2022-02-21 8:52 ` [PATCH v3 31/32] mtd: spi-nor: slightly change code style in spi_nor_sr_ready() Michael Walle
2022-02-21 8:52 ` [PATCH v3 32/32] mtd: spi-nor: renumber flags Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220221085236.1452024-14-michael@walle.cc \
--to=michael@walle.cc \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
--cc=yaliang.wang@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®