mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: davem@davemloft.net, herbert@gondor.apana.org.au, jglauber@cavium.com
Cc: linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
	Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH] crypto: cavium: zip: register algorithm only if hardware is present
Date: Mon, 21 Feb 2022 11:52:34 +0000	[thread overview]
Message-ID: <20220221115234.2544665-1-clabbe@baylibre.com> (raw)

On my renesas salavator-X, I saw some cavium driver failing crypto
self-tests.
But salvator does not have such hardware.
This is due to cavium/zip driver registering algorithms even if hardware
is not present.
The solution is to move algorithm registration in the probe function.
This permits also to simplify module init/exit by using
module_pci_driver.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---

WARNING: this is boot tested only on salvator-X to be sure that the
cavium/zip driver no longer registers algorithms.
I do not have any cavium hardware unfortunatly.

 drivers/crypto/cavium/zip/zip_main.c | 83 ++++++++++++----------------
 1 file changed, 35 insertions(+), 48 deletions(-)

diff --git a/drivers/crypto/cavium/zip/zip_main.c b/drivers/crypto/cavium/zip/zip_main.c
index 812b4ac9afd6..dc5b7bf7e1fd 100644
--- a/drivers/crypto/cavium/zip/zip_main.c
+++ b/drivers/crypto/cavium/zip/zip_main.c
@@ -55,6 +55,11 @@ static const struct pci_device_id zip_id_table[] = {
 	{ 0, }
 };
 
+static void zip_debugfs_init(void);
+static void zip_debugfs_exit(void);
+static int zip_register_compression_device(void);
+static void zip_unregister_compression_device(void);
+
 void zip_reg_write(u64 val, u64 __iomem *addr)
 {
 	writeq(val, addr);
@@ -235,6 +240,15 @@ static int zip_init_hw(struct zip_device *zip)
 	return 0;
 }
 
+static void zip_reset(struct zip_device *zip)
+{
+	union zip_cmd_ctl cmd_ctl;
+
+	cmd_ctl.u_reg64 = 0x0ull;
+	cmd_ctl.s.reset = 1;  /* Forces ZIP cores to do reset */
+	zip_reg_write(cmd_ctl.u_reg64, (zip->reg_base + ZIP_CMD_CTL));
+}
+
 static int zip_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct device *dev = &pdev->dev;
@@ -282,8 +296,21 @@ static int zip_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_release_regions;
 
+	/* Register with the Kernel Crypto Interface */
+	err = zip_register_compression_device();
+	if (err < 0) {
+		zip_err("ZIP: Kernel Crypto Registration failed\n");
+		goto err_register;
+	}
+
+	/* comp-decomp statistics are handled with debugfs interface */
+	zip_debugfs_init();
+
 	return 0;
 
+err_register:
+	zip_reset(zip);
+
 err_release_regions:
 	if (zip->reg_base)
 		iounmap(zip->reg_base);
@@ -305,16 +332,17 @@ static int zip_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 static void zip_remove(struct pci_dev *pdev)
 {
 	struct zip_device *zip = pci_get_drvdata(pdev);
-	union zip_cmd_ctl cmd_ctl;
 	int q = 0;
 
 	if (!zip)
 		return;
 
+	zip_debugfs_exit();
+
+	zip_unregister_compression_device();
+
 	if (zip->reg_base) {
-		cmd_ctl.u_reg64 = 0x0ull;
-		cmd_ctl.s.reset = 1;  /* Forces ZIP cores to do reset */
-		zip_reg_write(cmd_ctl.u_reg64, (zip->reg_base + ZIP_CMD_CTL));
+		zip_reset(zip);
 		iounmap(zip->reg_base);
 	}
 
@@ -585,7 +613,7 @@ DEFINE_SHOW_ATTRIBUTE(zip_regs);
 /* Root directory for thunderx_zip debugfs entry */
 static struct dentry *zip_debugfs_root;
 
-static void __init zip_debugfs_init(void)
+static void zip_debugfs_init(void)
 {
 	if (!debugfs_initialized())
 		return;
@@ -604,7 +632,7 @@ static void __init zip_debugfs_init(void)
 
 }
 
-static void __exit zip_debugfs_exit(void)
+static void zip_debugfs_exit(void)
 {
 	debugfs_remove_recursive(zip_debugfs_root);
 }
@@ -615,48 +643,7 @@ static void __exit zip_debugfs_exit(void) { }
 #endif
 /* debugfs - end */
 
-static int __init zip_init_module(void)
-{
-	int ret;
-
-	zip_msg("%s\n", DRV_NAME);
-
-	ret = pci_register_driver(&zip_driver);
-	if (ret < 0) {
-		zip_err("ZIP: pci_register_driver() failed\n");
-		return ret;
-	}
-
-	/* Register with the Kernel Crypto Interface */
-	ret = zip_register_compression_device();
-	if (ret < 0) {
-		zip_err("ZIP: Kernel Crypto Registration failed\n");
-		goto err_pci_unregister;
-	}
-
-	/* comp-decomp statistics are handled with debugfs interface */
-	zip_debugfs_init();
-
-	return ret;
-
-err_pci_unregister:
-	pci_unregister_driver(&zip_driver);
-	return ret;
-}
-
-static void __exit zip_cleanup_module(void)
-{
-	zip_debugfs_exit();
-
-	/* Unregister from the kernel crypto interface */
-	zip_unregister_compression_device();
-
-	/* Unregister this driver for pci zip devices */
-	pci_unregister_driver(&zip_driver);
-}
-
-module_init(zip_init_module);
-module_exit(zip_cleanup_module);
+module_pci_driver(zip_driver);
 
 MODULE_AUTHOR("Cavium Inc");
 MODULE_DESCRIPTION("Cavium Inc ThunderX ZIP Driver");
-- 
2.34.1


             reply	other threads:[~2022-02-21 11:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-21 11:52 Corentin Labbe [this message]
2022-02-25 13:25 ` Jan Glauber
2022-03-02 22:58 ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220221115234.2544665-1-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=jglauber@cavium.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®