From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: linux-kernel@vger.kernel.org
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>,
Theodore Ts'o <tytso@mit.edu>,
Dominik Brodowski <linux@dominikbrodowski.net>
Subject: [PATCH v3] random: unify cycles_t and jiffies usage and types
Date: Fri, 25 Feb 2022 14:44:08 +0100 [thread overview]
Message-ID: <20220225134408.933305-1-Jason@zx2c4.com> (raw)
In-Reply-To: <CAHmME9qsj-Ge0LAXwFjtaMpY6W-G_fB7fTdXQ3rKRGpVpHnDnw@mail.gmail.com>
random_get_entropy() returns a cycles_t, not an unsigned long, which is
sometimes 64 bits on various 32-bit platforms, including x86.
Conversely, jiffies is always unsigned long. This commit fixes things to
use cycles_t for fields that use random_get_entropy(), named "cycles",
and unsigned long for fields that use jiffies, named "now". It's also
good to mix in a cycles_t and a jiffies in the same way for both
add_device_randomness and add_timer_randomness, rather than using xor in
one case. Finally, we unify the order of these volatile reads, always
reading the more precise cycles counter, and then jiffies, so that the
cycle counter is as close to the event as possible.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
drivers/char/random.c | 56 +++++++++++++++++++++----------------------
1 file changed, 27 insertions(+), 29 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 1aeaad4e3c9c..d9321b9bd3e3 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1005,12 +1005,6 @@ int __init rand_initialize(void)
return 0;
}
-/* There is one of these per entropy source */
-struct timer_rand_state {
- cycles_t last_time;
- long last_delta, last_delta2;
-};
-
/*
* Add device- or boot-specific data to the input pool to help
* initialize it.
@@ -1021,19 +1015,26 @@ struct timer_rand_state {
*/
void add_device_randomness(const void *buf, size_t size)
{
- unsigned long time = random_get_entropy() ^ jiffies;
- unsigned long flags;
+ cycles_t cycles = random_get_entropy();
+ unsigned long flags, now = jiffies;
if (crng_init == 0 && size)
crng_pre_init_inject(buf, size, false);
spin_lock_irqsave(&input_pool.lock, flags);
+ _mix_pool_bytes(&cycles, sizeof(cycles));
+ _mix_pool_bytes(&now, sizeof(now));
_mix_pool_bytes(buf, size);
- _mix_pool_bytes(&time, sizeof(time));
spin_unlock_irqrestore(&input_pool.lock, flags);
}
EXPORT_SYMBOL(add_device_randomness);
+/* There is one of these per entropy source */
+struct timer_rand_state {
+ unsigned long last_time;
+ long last_delta, last_delta2;
+};
+
/*
* This function adds entropy to the entropy "pool" by using timing
* delays. It uses the timer_rand_state structure to make an estimate
@@ -1042,29 +1043,26 @@ EXPORT_SYMBOL(add_device_randomness);
* The number "num" is also added to the pool - it should somehow describe
* the type of event which just happened. This is currently 0-255 for
* keyboard scan codes, and 256 upwards for interrupts.
- *
*/
static void add_timer_randomness(struct timer_rand_state *state, unsigned int num)
{
- struct {
- long jiffies;
- unsigned int cycles;
- unsigned int num;
- } sample;
+ cycles_t cycles = random_get_entropy();
+ unsigned long flags, now = jiffies;
long delta, delta2, delta3;
- sample.jiffies = jiffies;
- sample.cycles = random_get_entropy();
- sample.num = num;
- mix_pool_bytes(&sample, sizeof(sample));
+ spin_lock_irqsave(&input_pool.lock, flags);
+ _mix_pool_bytes(&cycles, sizeof(cycles));
+ _mix_pool_bytes(&now, sizeof(now));
+ _mix_pool_bytes(&num, sizeof(num));
+ spin_unlock_irqrestore(&input_pool.lock, flags);
/*
* Calculate number of bits of randomness we probably added.
* We take into account the first, second and third-order deltas
* in order to make our estimate.
*/
- delta = sample.jiffies - READ_ONCE(state->last_time);
- WRITE_ONCE(state->last_time, sample.jiffies);
+ delta = now - READ_ONCE(state->last_time);
+ WRITE_ONCE(state->last_time, now);
delta2 = delta - READ_ONCE(state->last_delta);
WRITE_ONCE(state->last_delta, delta);
@@ -1311,10 +1309,10 @@ static void mix_interrupt_randomness(struct work_struct *work)
void add_interrupt_randomness(int irq)
{
enum { MIX_INFLIGHT = 1U << 31 };
+ cycles_t cycles = random_get_entropy();
+ unsigned long now = jiffies;
struct fast_pool *fast_pool = this_cpu_ptr(&irq_randomness);
struct pt_regs *regs = get_irq_regs();
- unsigned long now = jiffies;
- cycles_t cycles = random_get_entropy();
unsigned int new_count;
if (cycles == 0)
@@ -1376,28 +1374,28 @@ static void entropy_timer(struct timer_list *t)
static void try_to_generate_entropy(void)
{
struct {
- unsigned long now;
+ cycles_t cycles;
struct timer_list timer;
} stack;
- stack.now = random_get_entropy();
+ stack.cycles = random_get_entropy();
/* Slow counter - or none. Don't even bother */
- if (stack.now == random_get_entropy())
+ if (stack.cycles == random_get_entropy())
return;
timer_setup_on_stack(&stack.timer, entropy_timer, 0);
while (!crng_ready()) {
if (!timer_pending(&stack.timer))
mod_timer(&stack.timer, jiffies + 1);
- mix_pool_bytes(&stack.now, sizeof(stack.now));
+ mix_pool_bytes(&stack.cycles, sizeof(stack.cycles));
schedule();
- stack.now = random_get_entropy();
+ stack.cycles = random_get_entropy();
}
del_timer_sync(&stack.timer);
destroy_timer_on_stack(&stack.timer);
- mix_pool_bytes(&stack.now, sizeof(stack.now));
+ mix_pool_bytes(&stack.cycles, sizeof(stack.cycles));
}
--
2.35.1
next prev parent reply other threads:[~2022-02-25 13:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 17:39 [PATCH] random: use proper cycle_t type for random_get_entropy() Jason A. Donenfeld
2022-02-24 21:30 ` [PATCH v2] random: unify cycles_t and jiffies usage and types Jason A. Donenfeld
2022-02-25 6:58 ` Dominik Brodowski
2022-02-25 13:39 ` Jason A. Donenfeld
2022-02-25 13:44 ` Jason A. Donenfeld [this message]
2022-02-25 14:16 ` [PATCH v3] " Dominik Brodowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220225134408.933305-1-Jason@zx2c4.com \
--to=jason@zx2c4.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®